[PATCH 1/2] dt-bindings: nvme: Add apple,t8132-nvme-ans2 compatible

[Rob Herring]

On Tue, Aug 11, 2026 at 10:49:47PM +0200, Yureka Lilian wrote:
> Add a new base compatible for the ANS2 NVMe on the Apple t8132 (M4) SoC,
> which uses a separate MMIO base for its NVMMU.
> 
> Signed-off-by: Yureka Lilian <yureka at cyberchaos.dev>
> ---
>  .../devicetree/bindings/nvme/apple,nvme-ans.yaml   | 77 ++++++++++++++--------
>  1 file changed, 48 insertions(+), 29 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/nvme/apple,nvme-ans.yaml b/Documentation/devicetree/bindings/nvme/apple,nvme-ans.yaml
> index 4c0b1f90aff8..c8a41b268b9c 100644
> --- a/Documentation/devicetree/bindings/nvme/apple,nvme-ans.yaml
> +++ b/Documentation/devicetree/bindings/nvme/apple,nvme-ans.yaml
> @@ -16,6 +16,7 @@ properties:
>        - items:
>            - const: apple,t6020-nvme-ans2
>            - const: apple,t8103-nvme-ans2
> +      - const: apple,t8132-nvme-ans2
>        - items:
>            - enum:
>                # Do not add additional SoC to this list.
> @@ -24,16 +25,6 @@ properties:
>                - apple,t6000-nvme-ans2
>            - const: apple,nvme-ans2
>  
> -  reg:
> -    items:
> -      - description: NVMe and NVMMU registers
> -      - description: ANS2 co-processor control registers
> -
> -  reg-names:
> -    items:
> -      - const: nvme
> -      - const: ans
> -

Keep properties defined at the top level. More below.

>    resets:
>      maxItems: 1
>  
> @@ -68,25 +59,53 @@ properties:
>  
>        The SART address filter is documented in iommu/apple,sart.yaml.
>  
> -if:
> -  properties:
> -    compatible:
> -      contains:
> -        enum:
> -          - apple,t6000-nvme-ans2
> -          - apple,t6020-nvme-ans2
> -then:
> -  properties:
> -    power-domains:
> -      minItems: 3
> -    power-domain-names:
> -      minItems: 3
> -else:
> -  properties:
> -    power-domains:
> -      maxItems: 2
> -    power-domain-names:
> -      maxItems: 2
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: apple,t8132-nvme-ans2
> +    then:
> +      properties:
> +        reg:
> +          items:
> +            - description: NVMMU registers
> +            - description: NVMe registers
> +            - description: ANS2 co-processor control registers
> +        reg-names:
> +          items:
> +            - const: nvmmu
> +            - const: nvme
> +            - const: ans

New entries go on the end. So nvmmu last and defined at the top level. 
Then this is just 'minItems: 3'

> +    else:
> +      properties:
> +        reg:
> +          items:
> +            - description: NVMe and NVMMU registers
> +            - description: ANS2 co-processor control registers
> +        reg-names:
> +          items:
> +            - const: nvme
> +            - const: ans

And 'maxItems: 2' on these 2.

Rob