[PATCH 07/13] libmultipath: Add delayed removal support

[Nilay Shroff]

On 4/9/26 6:30 PM, John Garry wrote:
> On 09/04/2026 07:37, Nilay Shroff wrote:
>>>
>>> You mean a common blktests testcase, right?
>>>
>>> For NVMe, that test would:
>>> a. try to remove NVMe ko when we have the delayed removal active
>>> b. ensure that we can queue for no path
>>>
>>> I suppose that a common testcase could be possible (with dm mpath), but doesn't dm have its own testsuite?
>>>
>> Yes, I'd add a blktest for 'queue_if_no_path' feature. But as we know we have
>> separate test suite for dm under blktests, I'd first target nvme testcase and
>> then later add another testcase for dm-multipath.
> 
> Testing a. is a challenge to be effective, as we would typically not be able to remove the nvme modules anyway due to many other references.
> 
> For b, how about something like the following:
> 
> set_conditions() {
>      _set_nvme_trtype "$@"
> }
> 
> _delayed_nvme_reconnect_ctrl() {
>      sleep 2
>      _nvme_connect_subsys
> }
> 
> test() {
>      echo "Running ${TEST_NAME}"
> 
>      _setup_nvmet
> 
>      local nvmedev
>      local ns
>      local bytes_written
> 
>      _nvmet_target_setup
>      _nvme_connect_subsys
> 
>      # Part a: Ensure writes fail when no path returns
>      nvmedev=$(_find_nvme_dev "${def_subsysnqn}")
>      ns=$(_find_nvme_ns "${def_subsys_uuid}")
>      echo 10 > "/sys/block/"$ns"/delayed_removal_secs"
>      bytes_written=$(run_xfs_io_pwritev2 /dev/"$ns" 4096)
>      if [ "$bytes_written" != 4096 ]; then
>          echo "could not write successfully initially"
>      fi
>      sleep 1
>      _nvme_disconnect_ctrl "${nvmedev}"
>      sleep 1
>      ns=$(_find_nvme_ns "${def_subsys_uuid}")
>      if [[ "${ns}" = "" ]]; then
>          echo "could not find ns after disconnect"
>      fi
>      bytes_written=$(run_xfs_io_pwritev2 /dev/"$ns" 4096)
>      if [ "$bytes_written" == 4096 ]; then
>          echo "wrote successfully after disconnect"
>      fi
>      sleep 10
>      ns=$(_find_nvme_ns "${def_subsys_uuid}")
>      if [[ !"${ns}" = "" ]]; then
>          echo "found ns after delayed removal"
>      fi
> 
>      #echo "now part 2"
>      # Part b: Ensure writes work for intermittent disconnect
>      _nvme_connect_subsys
> 
>      nvmedev=$(_find_nvme_dev "${def_subsysnqn}")
>      ns=$(_find_nvme_ns "${def_subsys_uuid}")
>      echo 10 > "/sys/block/"$ns"/delayed_removal_secs"
>      bytes_written=$(run_xfs_io_pwritev2 /dev/"$ns" 4096)
>      if [ "$bytes_written" != 4096 ]; then
>          echo "could not write successfully initially"
>      fi
>      sleep 1
>      _nvme_disconnect_ctrl "${nvmedev}"
>      sleep 1
>      ns=$(_find_nvme_ns "${def_subsys_uuid}")
>      if [[ "${ns}" = "" ]]; then
>          echo "could not find ns after disconnect"
>      fi
>      _delayed_nvme_reconnect_ctrl &
>      sleep 1
>      bytes_written=$(run_xfs_io_pwritev2 /dev/"$ns" 4096)
>      if [ "$bytes_written" != 4096 ]; then
>          echo "could not write successfully with reconnect"
>      fi

It seems there may be a race here if we attempt to write to $ns before
the reconnect has completed in _delayed_nvme_reconnect_ctrl.

If the intention is simply to verify that the controller reconnect occurs
within the delayed removal window and test pwrite, then it may be sufficient
to:
- perform the reconnect, and
- then validate the write (pwrite) afterwards.

In that case, we could either:
- run _delayed_nvme_reconnect_ctrl in the foreground, or
- open-code the reconnect directly in the script before issuing the write.

>      sleep 10
>      ns=$(_find_nvme_ns "${def_subsys_uuid}")
>      if [[ "${ns}" = "" ]]; then
>          echo "could not find ns after delayed reconnect"
>      fi
> 
>      # Final tidy-up
>      echo 0 > /sys/block/"$ns"/delayed_removal_secs
>      nvmedev=$(_find_nvme_dev "${def_subsysnqn}")
>      _nvme_disconnect_ctrl "${nvmedev}"
>      _nvmet_target_cleanup
> 
>      echo "Test complete"
> }

Otherwise overall this looks good to me.

Thanks,
--Nilay