[PATCH 1/3] nvmet: pci-epf: Correctly initialize CSTS when enabling the controller
Damien Le Moal
dlemoal at kernel.org
Sun Feb 9 16:28:13 PST 2025
The function nvmet_pci_epf_poll_cc_work() sets the NVME_CSTS_RDY bit of
the controller status register (CSTS) when nvmet_pci_epf_enable_ctrl()
returns success. However, since this function can be called several
times (e.g. if the host reboots), instead of setting the bit in
ctrl->csts, initialize this field to only have NVME_CSTS_RDY set.
Conversely, if nvmet_pci_epf_enable_ctrl() fails, make sure to clear all
bits from ctrl->csts.
To simplify nvmet_pci_epf_poll_cc_work(), initialize ctrl->csts to
NVME_CSTS_RDY directly inside nvmet_pci_epf_enable_ctrl() and clear this
field in that function as well in case of a failure. To be consistent,
move clearing the NVME_CSTS_RDY bit from ctrl->csts when the controller
is being disabled from nvmet_pci_epf_poll_cc_work() into
nvmet_pci_epf_disable_ctrl().
Fixes: 0faa0fe6f90e ("nvmet: New NVMe PCI endpoint function target driver")
Signed-off-by: Damien Le Moal <dlemoal at kernel.org>
---
drivers/nvme/target/pci-epf.c | 20 ++++++++++++--------
1 file changed, 12 insertions(+), 8 deletions(-)
diff --git a/drivers/nvme/target/pci-epf.c b/drivers/nvme/target/pci-epf.c
index ac30b42cc622..efd4623fb002 100644
--- a/drivers/nvme/target/pci-epf.c
+++ b/drivers/nvme/target/pci-epf.c
@@ -1822,14 +1822,14 @@ static int nvmet_pci_epf_enable_ctrl(struct nvmet_pci_epf_ctrl *ctrl)
if (ctrl->io_sqes < sizeof(struct nvme_command)) {
dev_err(ctrl->dev, "Unsupported I/O SQES %zu (need %zu)\n",
ctrl->io_sqes, sizeof(struct nvme_command));
- return -EINVAL;
+ goto err;
}
ctrl->io_cqes = 1UL << nvmet_cc_iocqes(ctrl->cc);
if (ctrl->io_cqes < sizeof(struct nvme_completion)) {
dev_err(ctrl->dev, "Unsupported I/O CQES %zu (need %zu)\n",
ctrl->io_sqes, sizeof(struct nvme_completion));
- return -EINVAL;
+ goto err;
}
/* Create the admin queue. */
@@ -1844,7 +1844,7 @@ static int nvmet_pci_epf_enable_ctrl(struct nvmet_pci_epf_ctrl *ctrl)
qsize, pci_addr, 0);
if (status != NVME_SC_SUCCESS) {
dev_err(ctrl->dev, "Failed to create admin completion queue\n");
- return -EINVAL;
+ goto err;
}
qsize = aqa & 0x00000fff;
@@ -1854,17 +1854,22 @@ static int nvmet_pci_epf_enable_ctrl(struct nvmet_pci_epf_ctrl *ctrl)
if (status != NVME_SC_SUCCESS) {
dev_err(ctrl->dev, "Failed to create admin submission queue\n");
nvmet_pci_epf_delete_cq(ctrl->tctrl, 0);
- return -EINVAL;
+ goto err;
}
ctrl->sq_ab = NVMET_PCI_EPF_SQ_AB;
ctrl->irq_vector_threshold = NVMET_PCI_EPF_IV_THRESHOLD;
ctrl->enabled = true;
+ ctrl->csts = NVME_CSTS_RDY;
/* Start polling the controller SQs. */
schedule_delayed_work(&ctrl->poll_sqs, 0);
return 0;
+
+err:
+ ctrl->csts = 0;
+ return -EINVAL;
}
static void nvmet_pci_epf_disable_ctrl(struct nvmet_pci_epf_ctrl *ctrl)
@@ -1889,6 +1894,8 @@ static void nvmet_pci_epf_disable_ctrl(struct nvmet_pci_epf_ctrl *ctrl)
/* Delete the admin queue last. */
nvmet_pci_epf_delete_sq(ctrl->tctrl, 0);
nvmet_pci_epf_delete_cq(ctrl->tctrl, 0);
+
+ ctrl->csts &= ~NVME_CSTS_RDY;
}
static void nvmet_pci_epf_poll_cc_work(struct work_struct *work)
@@ -1909,13 +1916,10 @@ static void nvmet_pci_epf_poll_cc_work(struct work_struct *work)
ret = nvmet_pci_epf_enable_ctrl(ctrl);
if (ret)
return;
- ctrl->csts |= NVME_CSTS_RDY;
}
- if (!nvmet_cc_en(new_cc) && nvmet_cc_en(old_cc)) {
+ if (!nvmet_cc_en(new_cc) && nvmet_cc_en(old_cc))
nvmet_pci_epf_disable_ctrl(ctrl);
- ctrl->csts &= ~NVME_CSTS_RDY;
- }
if (nvmet_cc_shn(new_cc) && !nvmet_cc_shn(old_cc)) {
nvmet_pci_epf_disable_ctrl(ctrl);
--
2.48.1
More information about the Linux-nvme
mailing list