[PATCH 09/11] nvmet: Implement basic In-Band Authentication

Hannes Reinecke hare at suse.de
Sun May 22 23:03:05 PDT 2022


On 5/22/22 13:44, Max Gurtovoy wrote:
> Hi Hannes,
> 
> On 5/18/2022 2:22 PM, Hannes Reinecke wrote:
>> Implement NVMe-oF In-Band authentication according to NVMe TPAR 8006.
>> This patch adds three additional configfs entries 'dhchap_key',
>> 'dhchap_ctrl_key', and 'dhchap_hash' to the 'host' configfs directory.
>> The 'dhchap_key' and 'dhchap_ctrl_key' entries need to be in the ASCII
>> format as specified in NVMe Base Specification v2.0 section 8.13.5.8
>> 'Secret representation'.
>> 'dhchap_hash' defaults to 'hmac(sha256)', and can be written to to
>> switch to a different HMAC algorithm.
>>
>> Signed-off-by: Hannes Reinecke <hare at suse.de>
>> ---
>>   drivers/nvme/target/Kconfig            |  12 +
>>   drivers/nvme/target/Makefile           |   1 +
>>   drivers/nvme/target/admin-cmd.c        |   2 +
>>   drivers/nvme/target/auth.c             | 367 ++++++++++++++++++
>>   drivers/nvme/target/configfs.c         | 107 +++++-
>>   drivers/nvme/target/core.c             |  11 +
>>   drivers/nvme/target/fabrics-cmd-auth.c | 491 +++++++++++++++++++++++++
>>   drivers/nvme/target/fabrics-cmd.c      |  38 +-
>>   drivers/nvme/target/nvmet.h            |  62 ++++
>>   9 files changed, 1088 insertions(+), 3 deletions(-)
>>   create mode 100644 drivers/nvme/target/auth.c
>>   create mode 100644 drivers/nvme/target/fabrics-cmd-auth.c
>>
>> diff --git a/drivers/nvme/target/Kconfig b/drivers/nvme/target/Kconfig
>> index 973561c93888..e569319be679 100644
>> --- a/drivers/nvme/target/Kconfig
>> +++ b/drivers/nvme/target/Kconfig
>> @@ -83,3 +83,15 @@ config NVME_TARGET_TCP
>>         devices over TCP.
>>         If unsure, say N.
>> +
>> +config NVME_TARGET_AUTH
>> +    bool "NVMe over Fabrics In-band Authentication support"
>> +    depends on NVME_TARGET
>> +    depends on NVME_AUTH
>> +    select CRYPTO_HMAC
>> +    select CRYPTO_SHA256
>> +    select CRYPTO_SHA512
>> +    help
>> +      This enables support for NVMe over Fabrics In-band Authentication
>> +
>> +      If unsure, say N.
>> diff --git a/drivers/nvme/target/Makefile b/drivers/nvme/target/Makefile
>> index 9837e580fa7e..c66820102493 100644
>> --- a/drivers/nvme/target/Makefile
>> +++ b/drivers/nvme/target/Makefile
>> @@ -13,6 +13,7 @@ nvmet-y        += core.o configfs.o admin-cmd.o 
>> fabrics-cmd.o \
>>               discovery.o io-cmd-file.o io-cmd-bdev.o
>>   nvmet-$(CONFIG_NVME_TARGET_PASSTHRU)    += passthru.o
>>   nvmet-$(CONFIG_BLK_DEV_ZONED)        += zns.o
>> +nvmet-$(CONFIG_NVME_TARGET_AUTH)    += fabrics-cmd-auth.o auth.o
>>   nvme-loop-y    += loop.o
>>   nvmet-rdma-y    += rdma.o
>>   nvmet-fc-y    += fc.o
>> diff --git a/drivers/nvme/target/admin-cmd.c 
>> b/drivers/nvme/target/admin-cmd.c
>> index 31df40ac828f..fc8a957fad0a 100644
>> --- a/drivers/nvme/target/admin-cmd.c
>> +++ b/drivers/nvme/target/admin-cmd.c
>> @@ -1018,6 +1018,8 @@ u16 nvmet_parse_admin_cmd(struct nvmet_req *req)
>>       if (nvme_is_fabrics(cmd))
>>           return nvmet_parse_fabrics_admin_cmd(req);
>> +    if (unlikely(!nvmet_check_auth_status(req)))
>> +        return NVME_SC_AUTH_REQUIRED | NVME_SC_DNR;
>>       if (nvmet_is_disc_subsys(nvmet_req_subsys(req)))
>>           return nvmet_parse_discovery_cmd(req);
>> diff --git a/drivers/nvme/target/auth.c b/drivers/nvme/target/auth.c
>> new file mode 100644
>> index 000000000000..003c0faad7ff
>> --- /dev/null
>> +++ b/drivers/nvme/target/auth.c
>> @@ -0,0 +1,367 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * NVMe over Fabrics DH-HMAC-CHAP authentication.
>> + * Copyright (c) 2020 Hannes Reinecke, SUSE Software Solutions.
>> + * All rights reserved.
>> + */
>> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
>> +#include <linux/module.h>
>> +#include <linux/init.h>
>> +#include <linux/slab.h>
>> +#include <linux/err.h>
>> +#include <crypto/hash.h>
>> +#include <linux/crc32.h>
>> +#include <linux/base64.h>
>> +#include <linux/ctype.h>
>> +#include <linux/random.h>
>> +#include <asm/unaligned.h>
>> +
>> +#include "nvmet.h"
>> +#include "../host/auth.h"
> 
> maybe we can put the common stuff to include/linux/nvme-auth.h instead 
> of doing ../host/auth.h ?
> 
> 
Yes, we can do that.
Will be fixing it for the next round.

Cheers,

Hannes
-- 
Dr. Hannes Reinecke                Kernel Storage Architect
hare at suse.de                              +49 911 74053 688
SUSE Software Solutions GmbH, Maxfeldstr. 5, 90409 Nürnberg
HRB 36809 (AG Nürnberg), Geschäftsführer: Ivo Totev, Andrew
Myers, Andrew McDonald, Martje Boudien Moerman



More information about the Linux-nvme mailing list