[PATCH v1 2/3] PCI: Support asynchronous shutdown

Tanjore Suresh tansuresh at google.com
Mon Mar 28 16:00:07 PDT 2022


Enhances the base PCI driver to add support for asynchronous
shutdown.

Assume a device takes n secs to shutdown. If a machine has been
populated with M such devices, the total time spent in shutting down
all the devices will be M * n secs, if the shutdown is done
synchronously. For example, if NVMe PCI Controllers take 5 secs
to shutdown and if there are 16 such NVMe controllers in a system,
system will spend a total of 80 secs to shutdown all
NVMe devices in that system.

In order to speed up the shutdown time, asynchronous interface to
shutdown has been implemented. This will significantly reduce
the machine reboot time.

Signed-off-by: Tanjore Suresh <tansuresh at google.com>
---
 drivers/pci/pci-driver.c | 17 ++++++++++++++---
 include/linux/pci.h      |  2 ++
 2 files changed, 16 insertions(+), 3 deletions(-)

diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index 4ceeb75fc899..0d0b46d71e88 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -501,14 +501,16 @@ static void pci_device_remove(struct device *dev)
 	pci_dev_put(pci_dev);
 }
 
-static void pci_device_shutdown(struct device *dev)
+static void pci_device_shutdown_pre(struct device *dev)
 {
 	struct pci_dev *pci_dev = to_pci_dev(dev);
 	struct pci_driver *drv = pci_dev->driver;
 
 	pm_runtime_resume(dev);
 
-	if (drv && drv->shutdown)
+	if (drv && drv->shutdown_pre)
+		drv->shutdown_pre(pci_dev);
+	else if (drv && drv->shutdown)
 		drv->shutdown(pci_dev);
 
 	/*
@@ -522,6 +524,14 @@ static void pci_device_shutdown(struct device *dev)
 		pci_clear_master(pci_dev);
 }
 
+static void pci_device_shutdown_post(struct device *dev)
+{
+	struct pci_dev *pci_dev = to_pci_dev(dev);
+	struct pci_driver *drv = pci_dev->driver;
+
+	if (drv && drv->shutdown_post)
+		drv->shutdown_post(pci_dev);
+}
 #ifdef CONFIG_PM
 
 /* Auxiliary functions used for system resume and run-time resume. */
@@ -1625,7 +1635,8 @@ struct bus_type pci_bus_type = {
 	.uevent		= pci_uevent,
 	.probe		= pci_device_probe,
 	.remove		= pci_device_remove,
-	.shutdown	= pci_device_shutdown,
+	.shutdown_pre	= pci_device_shutdown_pre,
+	.shutdown_post	= pci_device_shutdown_post,
 	.dev_groups	= pci_dev_groups,
 	.bus_groups	= pci_bus_groups,
 	.drv_groups	= pci_drv_groups,
diff --git a/include/linux/pci.h b/include/linux/pci.h
index b957eeb89c7a..19047fcb3c8a 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -905,6 +905,8 @@ struct pci_driver {
 	int  (*suspend)(struct pci_dev *dev, pm_message_t state);	/* Device suspended */
 	int  (*resume)(struct pci_dev *dev);	/* Device woken up */
 	void (*shutdown)(struct pci_dev *dev);
+	void (*shutdown_pre)(struct pci_dev *dev);
+	void (*shutdown_post)(struct pci_dev *dev);
 	int  (*sriov_configure)(struct pci_dev *dev, int num_vfs); /* On PF */
 	int  (*sriov_set_msix_vec_count)(struct pci_dev *vf, int msix_vec_count); /* On PF */
 	u32  (*sriov_get_vf_total_msix)(struct pci_dev *pf);
-- 
2.35.1.1021.g381101b075-goog




More information about the Linux-nvme mailing list