[PATCH 2/6] nvme: add support for the Verify command

Chaitanya Kulkarni kch at nvidia.com
Thu Jun 30 02:14:02 PDT 2022


Allow verify operations (REQ_OP_VERIFY) on the block device, if the
device supports optional command bit set for verify. Add support
to setup verify command. Set maximum possible verify sectors in one
verify command according to maximum hardware sectors supported by the
controller.

Signed-off-by: Chaitanya Kulkarni <kch at nvidia.com>
---
 drivers/nvme/host/core.c | 33 +++++++++++++++++++++++++++++++++
 include/linux/nvme.h     | 19 +++++++++++++++++++
 2 files changed, 52 insertions(+)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 24165daee3c8..ef27580886b1 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -838,6 +838,19 @@ static inline blk_status_t nvme_setup_write_zeroes(struct nvme_ns *ns,
 	return BLK_STS_OK;
 }
 
+static inline blk_status_t nvme_setup_verify(struct nvme_ns *ns,
+		struct request *req, struct nvme_command *cmnd)
+{
+	cmnd->verify.opcode = nvme_cmd_verify;
+	cmnd->verify.nsid = cpu_to_le32(ns->head->ns_id);
+	cmnd->verify.slba =
+		cpu_to_le64(nvme_sect_to_lba(ns, blk_rq_pos(req)));
+	cmnd->verify.length =
+		cpu_to_le16((blk_rq_bytes(req) >> ns->lba_shift) - 1);
+	cmnd->verify.control = 0;
+	return BLK_STS_OK;
+}
+
 static inline blk_status_t nvme_setup_rw(struct nvme_ns *ns,
 		struct request *req, struct nvme_command *cmnd,
 		enum nvme_opcode op)
@@ -943,6 +956,9 @@ blk_status_t nvme_setup_cmd(struct nvme_ns *ns, struct request *req)
 	case REQ_OP_WRITE_ZEROES:
 		ret = nvme_setup_write_zeroes(ns, req, cmd);
 		break;
+	case REQ_OP_VERIFY:
+		ret = nvme_setup_verify(ns, req, cmd);
+		break;
 	case REQ_OP_DISCARD:
 		ret = nvme_setup_discard(ns, req, cmd);
 		break;
@@ -1672,6 +1688,22 @@ static void nvme_config_discard(struct gendisk *disk, struct nvme_ns *ns)
 		blk_queue_max_write_zeroes_sectors(queue, UINT_MAX);
 }
 
+static void nvme_config_verify(struct gendisk *disk, struct nvme_ns *ns)
+{
+	u64 max_blocks;
+
+	if (!(ns->ctrl->oncs & NVME_CTRL_ONCS_VERIFY))
+		return;
+
+	if (ns->ctrl->max_hw_sectors == UINT_MAX)
+		max_blocks = (u64)USHRT_MAX + 1;
+	else
+		max_blocks = ns->ctrl->max_hw_sectors + 1;
+
+	blk_queue_max_verify_sectors(disk->queue,
+				     nvme_lba_to_sect(ns, max_blocks));
+}
+
 static bool nvme_ns_ids_equal(struct nvme_ns_ids *a, struct nvme_ns_ids *b)
 {
 	return uuid_equal(&a->uuid, &b->uuid) &&
@@ -1871,6 +1903,7 @@ static void nvme_update_disk_info(struct gendisk *disk,
 	set_capacity_and_notify(disk, capacity);
 
 	nvme_config_discard(disk, ns);
+	nvme_config_verify(disk, ns);
 	blk_queue_max_write_zeroes_sectors(disk->queue,
 					   ns->ctrl->max_zeroes_sectors);
 }
diff --git a/include/linux/nvme.h b/include/linux/nvme.h
index 29ec3e3481ff..578bb4931665 100644
--- a/include/linux/nvme.h
+++ b/include/linux/nvme.h
@@ -363,6 +363,7 @@ enum {
 	NVME_CTRL_ONCS_WRITE_ZEROES		= 1 << 3,
 	NVME_CTRL_ONCS_RESERVATIONS		= 1 << 5,
 	NVME_CTRL_ONCS_TIMESTAMP		= 1 << 6,
+	NVME_CTRL_ONCS_VERIFY			= 1 << 7,
 	NVME_CTRL_VWC_PRESENT			= 1 << 0,
 	NVME_CTRL_OACS_SEC_SUPP                 = 1 << 0,
 	NVME_CTRL_OACS_NS_MNGT_SUPP		= 1 << 3,
@@ -1001,6 +1002,23 @@ struct nvme_write_zeroes_cmd {
 	__le16			appmask;
 };
 
+struct nvme_verify_cmd {
+	__u8			opcode;
+	__u8			flags;
+	__u16			command_id;
+	__le32			nsid;
+	__u64			rsvd2;
+	__le64			metadata;
+	union nvme_data_ptr	dptr;
+	__le64			slba;
+	__le16			length;
+	__le16			control;
+	__le32			rsvd3;
+	__le32			reftag;
+	__le16			eapptag;
+	__le16			eappmask;
+};
+
 enum nvme_zone_mgmt_action {
 	NVME_ZONE_CLOSE		= 0x1,
 	NVME_ZONE_FINISH	= 0x2,
@@ -1539,6 +1557,7 @@ struct nvme_command {
 		struct nvme_format_cmd format;
 		struct nvme_dsm_cmd dsm;
 		struct nvme_write_zeroes_cmd write_zeroes;
+		struct nvme_verify_cmd verify;
 		struct nvme_zone_mgmt_send_cmd zms;
 		struct nvme_zone_mgmt_recv_cmd zmr;
 		struct nvme_abort_cmd abort;
-- 
2.29.0




More information about the Linux-nvme mailing list