[PATCH v12 06/13] null_blk: allow zoned devices with non power-of-2 zone sizes

Pankaj Raghav p.raghav at samsung.com
Tue Aug 23 05:18:52 PDT 2022


Convert the power-of-2(po2) based calculation with zone size to be generic
in null_zone_no with optimization for po2 zone sizes.

The nr_zones calculation in null_init_zoned_dev has been replaced with a
division without special handling for po2 zone sizes as this function is
called only during the initialization and will not be invoked in the hot
path.

Reviewed-by: Luis Chamberlain <mcgrof at kernel.org>
Reviewed by: Adam Manzanares <a.manzanares at samsung.com>
Reviewed-by: Hannes Reinecke <hare at suse.de>
Signed-off-by: Pankaj Raghav <p.raghav at samsung.com>
---
 drivers/block/null_blk/main.c     |  5 ++---
 drivers/block/null_blk/null_blk.h |  1 +
 drivers/block/null_blk/zoned.c    | 18 +++++++++++-------
 3 files changed, 14 insertions(+), 10 deletions(-)

diff --git a/drivers/block/null_blk/main.c b/drivers/block/null_blk/main.c
index 1f154f92f4c2..3b24125d8594 100644
--- a/drivers/block/null_blk/main.c
+++ b/drivers/block/null_blk/main.c
@@ -1976,9 +1976,8 @@ static int null_validate_conf(struct nullb_device *dev)
 	if (dev->queue_mode == NULL_Q_BIO)
 		dev->mbps = 0;
 
-	if (dev->zoned &&
-	    (!dev->zone_size || !is_power_of_2(dev->zone_size))) {
-		pr_err("zone_size must be power-of-two\n");
+	if (dev->zoned && !dev->zone_size) {
+		pr_err("Invalid zero zone size\n");
 		return -EINVAL;
 	}
 
diff --git a/drivers/block/null_blk/null_blk.h b/drivers/block/null_blk/null_blk.h
index 94ff68052b1e..f63b6bed1bb3 100644
--- a/drivers/block/null_blk/null_blk.h
+++ b/drivers/block/null_blk/null_blk.h
@@ -83,6 +83,7 @@ struct nullb_device {
 	unsigned int imp_close_zone_no;
 	struct nullb_zone *zones;
 	sector_t zone_size_sects;
+	unsigned int zone_size_sects_shift;
 	bool need_zone_res_mgmt;
 	spinlock_t zone_res_lock;
 
diff --git a/drivers/block/null_blk/zoned.c b/drivers/block/null_blk/zoned.c
index 55a69e48ef8b..015f6823706c 100644
--- a/drivers/block/null_blk/zoned.c
+++ b/drivers/block/null_blk/zoned.c
@@ -16,7 +16,10 @@ static inline sector_t mb_to_sects(unsigned long mb)
 
 static inline unsigned int null_zone_no(struct nullb_device *dev, sector_t sect)
 {
-	return sect >> ilog2(dev->zone_size_sects);
+	if (dev->zone_size_sects_shift)
+		return sect >> dev->zone_size_sects_shift;
+
+	return div64_u64(sect, dev->zone_size_sects);
 }
 
 static inline void null_lock_zone_res(struct nullb_device *dev)
@@ -65,10 +68,6 @@ int null_init_zoned_dev(struct nullb_device *dev, struct request_queue *q)
 	sector_t sector = 0;
 	unsigned int i;
 
-	if (!is_power_of_2(dev->zone_size)) {
-		pr_err("zone_size must be power-of-two\n");
-		return -EINVAL;
-	}
 	if (dev->zone_size > dev->size) {
 		pr_err("Zone size larger than device capacity\n");
 		return -EINVAL;
@@ -86,9 +85,14 @@ int null_init_zoned_dev(struct nullb_device *dev, struct request_queue *q)
 	zone_capacity_sects = mb_to_sects(dev->zone_capacity);
 	dev_capacity_sects = mb_to_sects(dev->size);
 	dev->zone_size_sects = mb_to_sects(dev->zone_size);
-	dev->nr_zones = round_up(dev_capacity_sects, dev->zone_size_sects)
-		>> ilog2(dev->zone_size_sects);
 
+	if (is_power_of_2(dev->zone_size_sects))
+		dev->zone_size_sects_shift = ilog2(dev->zone_size_sects);
+	else
+		dev->zone_size_sects_shift = 0;
+
+	dev->nr_zones =	DIV_ROUND_UP_SECTOR_T(dev_capacity_sects,
+					      dev->zone_size_sects);
 	dev->zones = kvmalloc_array(dev->nr_zones, sizeof(struct nullb_zone),
 				    GFP_KERNEL | __GFP_ZERO);
 	if (!dev->zones)
-- 
2.25.1




More information about the Linux-nvme mailing list