[PATCH v10 13/13] dm: add power-of-2 target for zoned devices with non power-of-2 zone sizes

Damien Le Moal damien.lemoal at opensource.wdc.com
Mon Aug 15 11:56:01 PDT 2022


On 2022/08/15 6:38, Pankaj Raghav wrote:
> Hi Damien,
> 
>>> +static int dm_po2z_map_read_emulated_area(struct dm_po2z_target *dmh,
>>> +					  struct bio *bio)
>>
>> This really should be called dm_po2z_handle_read() since it handles both cases
>> of read commands, with and without the accept partial. Note that this is
>> retesting the need for a split after that was already tested in dm_po2z_map()
>> with bio_across_emulated_zone_area(). So the code should be better organized to
>> avoid that repetition.
>>
>> You can simplify the code by having bio_across_emulated_zone_area() return 0 for
>> a bio that does not cross the zone capacity and return the number of sectors up
>> to the zone capacity from the bio start if there is a cross. That value can then
> The offset will also be zero if the BIO starts at the zone capacity and
> dm_po2z_map will assume that the bio did not cross the emulated zone boundary.
> 
>> be used to call dm_accept_partial_bio() directly in dm_po2z_map() for read
>> commands. That will make this function much simpler and essentially turn it into
>> dm_po2z_read_zeroes().
>>
>>> +{
> 
> What about something like this? We have one function:
> bio_in_emulated_zone_area() that checks if a BIO is partly or completely in the
> emulated zone area and also returns the offset from bio to the emulated zone
> boundary (zone capacity of the device).
> 
> /**
>  * bio_in_emulated_zone_area - check if bio is in the emulated zone area
>  * @dmh:	pozone target data
>  * @bio:	bio
>  * @offset:	bio offset to emulated zone boundary
>  *
>  * Check if a @bio is partly or completely in the emulated zone area. If the
>  * @bio is partly in the emulated zone area, @offset
>  * can be used to split the @bio across the emulated zone boundary. @offset
>  * will be negative if the @bio completely lies in the emulated area.
>  *  */
> static bool bio_in_emulated_zone_area(struct dm_po2z_target *dmh,
> 					  struct bio *bio, int *offset)
> {
> 	unsigned int zone_idx = po2_zone_no(dmh, bio->bi_iter.bi_sector);
> 	sector_t nr_sectors = bio->bi_iter.bi_size >> SECTOR_SHIFT;
> 	sector_t relative_sect_in_zone =

Nit: Could simply call this sector_offset.

> 		bio->bi_iter.bi_sector - (zone_idx << dmh->zone_size_po2_shift);
> 
> 	*offset = dmh->zone_size - relative_sect_in_zone;
> 
> 	return (relative_sect_in_zone + nr_sectors) > dmh->zone_size;

No need for the parenthesis.

> }
> 
> static int dm_po2z_read_zeroes(struct bio *bio)

Make that an inline.

> {
> 	zero_fill_bio(bio);
> 	bio_endio(bio);
> 	return DM_MAPIO_SUBMITTED;
> }
> 
> static int dm_po2z_remap_sector(struct dm_po2z_target *dmh, struct bio *bio)

Inline this one too.

> {
> 	bio->bi_iter.bi_sector =
> 		target_to_device_sect(dmh, bio->bi_iter.bi_sector);
> 	return DM_MAPIO_REMAPPED;
> }
> 
> static int dm_po2z_map(struct dm_target *ti, struct bio *bio)
> {
> 	struct dm_po2z_target *dmh = ti->private;
> 
> 	bio_set_dev(bio, dmh->dev->bdev);
> 	if (bio_sectors(bio) || op_is_zone_mgmt(bio_op(bio))) {
> 		int split_io_pos;

Blank line needed here.

> 		if (!bio_in_emulated_zone_area(dmh, bio, &split_io_pos)) {
> 			return dm_po2z_remap_sector(dmh, bio);
> 		}

No need for the curly brackets.

> 		/*
> 		 * Read operation on the emulated zone area (between zone capacity
> 		 * and zone size) will fill the bio with zeroes. Any other operation
> 		 * in the emulated area should return an error.
> 		 */
> 		if (bio_op(bio) == REQ_OP_READ) {
> 			if (split_io_pos > 0) {
> 				dm_accept_partial_bio(bio, split_io_pos);
> 				return dm_po2z_remap_sector(dmh, bio);
> 			}
> 			return dm_po2z_read_zeroes(bio);
> 		}
> 		return DM_MAPIO_KILL;
> 	}
> 	return DM_MAPIO_REMAPPED;
> }
> 
> Let me know what you think.

I think this is way better. But I would still reorganize this like this:

static int dm_po2z_map(struct dm_target *ti, struct bio *bio)
{
        struct dm_po2z_target *dmh = ti->private;
        int split_io_pos;

        bio_set_dev(bio, dmh->dev->bdev);

        if (op_is_zone_mgmt(bio_op(bio)))
                return dm_po2z_remap_sector(dmh, bio);

        if (!bio_sectors(bio))
                return DM_MAPIO_REMAPPED;

        /*
         * Read operation on the emulated zone area (between zone capacity
         * and zone size) will fill the bio with zeroes. Any other operation
         * in the emulated area should return an error.
         */
        if (!bio_in_emulated_zone_area(dmh, bio, &split_io_pos))
                return dm_po2z_remap_sector(dmh, bio);

        if (bio_op(bio) == REQ_OP_READ) {
                if (split_io_pos > 0) {
                        dm_accept_partial_bio(bio, split_io_pos);
                        return dm_po2z_remap_sector(dmh, bio);
                }
                return dm_po2z_read_zeroes(bio);
        }

        return DM_MAPIO_KILL;
}

I find the code easier to follow this way.



-- 
Damien Le Moal
Western Digital Research



More information about the Linux-nvme mailing list