[PATCH v7 1/3] nvme-fc: Update hardware queues before using them

[Daniel Wagner]

In case the number of hardware queues changes, we need to update the
tagset and the mapping of ctx to hctx first.

If we try to create and connect the I/O queues first, this operation
will fail (target will reject the connect call due to the wrong number
of queues) and hence we bail out of the recreate function. Then we
will to try the very same operation again, thus we don't make any
progress.

Reviewed-by: James Smart <jsmart2021 at gmail.com>
Reviewed-by: Ming Lei <ming.lei at redhat.com>
Reviewed-by: Hannes Reinecke <hare at suse.de>
Signed-off-by: Daniel Wagner <dwagner at suse.de>
---
 drivers/nvme/host/fc.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/nvme/host/fc.c b/drivers/nvme/host/fc.c
index b08a61ca283f..b5d9a5507de5 100644
--- a/drivers/nvme/host/fc.c
+++ b/drivers/nvme/host/fc.c
@@ -2951,14 +2951,6 @@ nvme_fc_recreate_io_queues(struct nvme_fc_ctrl *ctrl)
 	if (ctrl->ctrl.queue_count == 1)
 		return 0;
 
-	ret = nvme_fc_create_hw_io_queues(ctrl, ctrl->ctrl.sqsize + 1);
-	if (ret)
-		goto out_free_io_queues;
-
-	ret = nvme_fc_connect_io_queues(ctrl, ctrl->ctrl.sqsize + 1);
-	if (ret)
-		goto out_delete_hw_queues;
-
 	if (prior_ioq_cnt != nr_io_queues) {
 		dev_info(ctrl->ctrl.device,
 			"reconnect: revising io queue count from %d to %d\n",
@@ -2968,6 +2960,14 @@ nvme_fc_recreate_io_queues(struct nvme_fc_ctrl *ctrl)
 		nvme_unfreeze(&ctrl->ctrl);
 	}
 
+	ret = nvme_fc_create_hw_io_queues(ctrl, ctrl->ctrl.sqsize + 1);
+	if (ret)
+		goto out_free_io_queues;
+
+	ret = nvme_fc_connect_io_queues(ctrl, ctrl->ctrl.sqsize + 1);
+	if (ret)
+		goto out_delete_hw_queues;
+
 	return 0;
 
 out_delete_hw_queues:
-- 
2.29.2