[PATCH 1/1] nvme-pci: add the DISABLE_WRITE_ZEROES quirk for a Samsung PM1725a

[Christoph Hellwig]

Can you try this patch instead?

http://lists.infradead.org/pipermail/linux-nvme/2021-February/023183.html

On Wed, Mar 10, 2021 at 02:51:16PM +0300, Dmitry Monakhov wrote:
> This adds a quirk for Samsung PM1725a drive which fixes timeouts and
> I/O errors due to the fact that the controller does not properly
> handle the Write Zeroes command, dmesg log:
> 
> nvme nvme0: I/O 528 QID 10 timeout, aborting
> nvme nvme0: I/O 529 QID 10 timeout, aborting
> nvme nvme0: I/O 530 QID 10 timeout, aborting
> nvme nvme0: I/O 531 QID 10 timeout, aborting
> nvme nvme0: I/O 532 QID 10 timeout, aborting
> nvme nvme0: I/O 533 QID 10 timeout, aborting
> nvme nvme0: I/O 534 QID 10 timeout, aborting
> nvme nvme0: I/O 535 QID 10 timeout, aborting
> nvme nvme0: Abort status: 0x0
> nvme nvme0: Abort status: 0x0
> nvme nvme0: Abort status: 0x0
> nvme nvme0: Abort status: 0x0
> nvme nvme0: Abort status: 0x0
> nvme nvme0: Abort status: 0x0
> nvme nvme0: Abort status: 0x0
> nvme nvme0: Abort status: 0x0
> nvme nvme0: I/O 528 QID 10 timeout, reset controller
> nvme nvme0: controller is down; will reset: CSTS=0x3, PCI_STATUS=0x10
> nvme nvme0: Device not ready; aborting reset, CSTS=0x3
> nvme nvme0: Device not ready; aborting reset, CSTS=0x3
> nvme nvme0: Removing after probe failure status: -19
> nvme0n1: detected capacity change from 6251233968 to 0
> blk_update_request: I/O error, dev nvme0n1, sector 32776 op 0x1:(WRITE) flags 0x3000 phys_seg 6 prio class 0
> blk_update_request: I/O error, dev nvme0n1, sector 113319936 op 0x9:(WRITE_ZEROES) flags 0x800 phys_seg 0 prio class 0
> Buffer I/O error on dev nvme0n1p2, logical block 1, lost async page write
> blk_update_request: I/O error, dev nvme0n1, sector 113319680 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0
> Buffer I/O error on dev nvme0n1p2, logical block 2, lost async page write
> blk_update_request: I/O error, dev nvme0n1, sector 113319424 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0
> Buffer I/O error on dev nvme0n1p2, logical block 3, lost async page write
> blk_update_request: I/O error, dev nvme0n1, sector 113319168 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0
> Buffer I/O error on dev nvme0n1p2, logical block 4, lost async page write
> blk_update_request: I/O error, dev nvme0n1, sector 113318912 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0
> Buffer I/O error on dev nvme0n1p2, logical block 5, lost async page write
> blk_update_request: I/O error, dev nvme0n1, sector 113318656 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0
> Buffer I/O error on dev nvme0n1p2, logical block 6, lost async page write
> blk_update_request: I/O error, dev nvme0n1, sector 113318400 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0
> blk_update_request: I/O error, dev nvme0n1, sector 113318144 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0
> blk_update_request: I/O error, dev nvme0n1, sector 113317888 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0
> 
> Signed-off-by: Dmitry Monakhov <dmtrmonakhov at yandex-team.ru>
> ---
>  drivers/nvme/host/pci.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
> index 17ab332..7249ae7 100644
> --- a/drivers/nvme/host/pci.c
> +++ b/drivers/nvme/host/pci.c
> @@ -3246,6 +3246,7 @@ static const struct pci_device_id nvme_id_table[] = {
>  		.driver_data = NVME_QUIRK_DELAY_BEFORE_CHK_RDY, },
>  	{ PCI_DEVICE(0x144d, 0xa822),   /* Samsung PM1725a */
>  		.driver_data = NVME_QUIRK_DELAY_BEFORE_CHK_RDY |
> +				NVME_QUIRK_DISABLE_WRITE_ZEROES|
>  				NVME_QUIRK_IGNORE_DEV_SUBNQN, },
>  	{ PCI_DEVICE(0x1987, 0x5016),	/* Phison E16 */
>  		.driver_data = NVME_QUIRK_IGNORE_DEV_SUBNQN, },
> -- 
> 2.7.4
---end quoted text---