[PATCH v7 2/2] ACPI: Add quirks for AMD Renoir/Lucienne CPUs to force the D3 hint

[Rafael J. Wysocki]

On Tue, Jun 8, 2021 at 5:43 PM Mario Limonciello
<mario.limonciello at amd.com> wrote:
>
> AMD systems from Renoir and Lucienne require that the NVME controller
> is put into D3 over a Modern Standby / suspend-to-idle
> cycle.  This is "typically" accomplished using the `StorageD3Enable`
> property in the _DSD, but this property was introduced after many
> of these systems launched and most OEM systems don't have it in
> their BIOS.
>
> On AMD Renoir without these drives going into D3 over suspend-to-idle
> the resume will fail with the NVME controller being reset and a trace
> like this in the kernel logs:
> ```
> [   83.556118] nvme nvme0: I/O 161 QID 2 timeout, aborting
> [   83.556178] nvme nvme0: I/O 162 QID 2 timeout, aborting
> [   83.556187] nvme nvme0: I/O 163 QID 2 timeout, aborting
> [   83.556196] nvme nvme0: I/O 164 QID 2 timeout, aborting
> [   95.332114] nvme nvme0: I/O 25 QID 0 timeout, reset controller
> [   95.332843] nvme nvme0: Abort status: 0x371
> [   95.332852] nvme nvme0: Abort status: 0x371
> [   95.332856] nvme nvme0: Abort status: 0x371
> [   95.332859] nvme nvme0: Abort status: 0x371
> [   95.332909] PM: dpm_run_callback(): pci_pm_resume+0x0/0xe0 returns -16
> [   95.332936] nvme 0000:03:00.0: PM: failed to resume async: error -16
> ```
>
> The Microsoft documentation for StorageD3Enable mentioned that Windows has
> a hardcoded allowlist for D3 support, which was used for these platforms.
> Introduce quirks to hardcode them for Linux as well.
>
> As this property is now "standardized", OEM systems using AMD Cezanne and
> newer APU's have adopted this property, and quirks like this should not be
> necessary.
>
> CC: Julian Sikorski <belegdol at gmail.com>
> CC: Shyam-sundar S-k <Shyam-sundar.S-k at amd.com>
> CC: Alexander Deucher <Alexander.Deucher at amd.com>
> CC: Rafael J. Wysocki <rjw at rjwysocki.net>
> CC: Prike Liang <prike.liang at amd.com>
> Link: https://docs.microsoft.com/en-us/windows-hardware/design/component-guidelines/power-management-for-storage-hardware-devices-intro
> Signed-off-by: Mario Limonciello <mario.limonciello at amd.com>

Acked-by: Rafael J. Wysocki <rafael.j.wysocki at intel.com>

> ---
>  drivers/acpi/device_pm.c |  3 +++
>  drivers/acpi/internal.h  |  9 +++++++++
>  drivers/acpi/x86/utils.c | 25 +++++++++++++++++++++++++
>  3 files changed, 37 insertions(+)
>
> Changes from v4->v5:
>  * Add this patch back in as it's been made apparent that the
>    system needs to be hardcoded for these.
>    Changes:
>    - Drop Cezanne - it's now covered by StorageD3Enable
>    - Rebase ontop of acpi_storage_d3 outside of NVME
> Changes from v5->v6:
>  * Move the quirk check into drivers/acpi/x86/ as suggested by
>    Rafael.
> Changes from v6->v7:
>  * Move header location
>  * Optimization of force function
>
> diff --git a/drivers/acpi/device_pm.c b/drivers/acpi/device_pm.c
> index c45f2d76b67e..31e0025a913e 100644
> --- a/drivers/acpi/device_pm.c
> +++ b/drivers/acpi/device_pm.c
> @@ -1356,6 +1356,9 @@ bool acpi_storage_d3(struct device *dev)
>         struct acpi_device *adev = ACPI_COMPANION(dev);
>         u8 val;
>
> +       if (force_storage_d3())
> +               return true;
> +
>         if (!adev)
>                 return false;
>         if (fwnode_property_read_u8(acpi_fwnode_handle(adev), "StorageD3Enable",
> diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h
> index f973bbe90e5e..e29ec463bb07 100644
> --- a/drivers/acpi/internal.h
> +++ b/drivers/acpi/internal.h
> @@ -236,6 +236,15 @@ static inline int suspend_nvs_save(void) { return 0; }
>  static inline void suspend_nvs_restore(void) {}
>  #endif
>
> +#ifdef CONFIG_X86
> +bool force_storage_d3(void);
> +#else
> +static inline bool force_storage_d3(void)
> +{
> +       return false;
> +}
> +#endif
> +
>  /*--------------------------------------------------------------------------
>                                 Device properties
>    -------------------------------------------------------------------------- */
> diff --git a/drivers/acpi/x86/utils.c b/drivers/acpi/x86/utils.c
> index bdc1ba00aee9..5298bb4d81fe 100644
> --- a/drivers/acpi/x86/utils.c
> +++ b/drivers/acpi/x86/utils.c
> @@ -135,3 +135,28 @@ bool acpi_device_always_present(struct acpi_device *adev)
>
>         return ret;
>  }
> +
> +/*
> + * AMD systems from Renoir and Lucienne *require* that the NVME controller
> + * is put into D3 over a Modern Standby / suspend-to-idle cycle.
> + *
> + * This is "typically" accomplished using the `StorageD3Enable`
> + * property in the _DSD that is checked via the `acpi_storage_d3` function
> + * but this property was introduced after many of these systems launched
> + * and most OEM systems don't have it in their BIOS.
> + *
> + * The Microsoft documentation for StorageD3Enable mentioned that Windows has
> + * a hardcoded allowlist for D3 support, which was used for these platforms.
> + *
> + * This allows quirking on Linux in a similar fashion.
> + */
> +const struct x86_cpu_id storage_d3_cpu_ids[] = {
> +       X86_MATCH_VENDOR_FAM_MODEL(AMD, 23, 96, NULL),  /* Renoir */
> +       X86_MATCH_VENDOR_FAM_MODEL(AMD, 23, 104, NULL), /* Lucienne */
> +       {}
> +};
> +
> +bool force_storage_d3(void)
> +{
> +       return x86_match_cpu(storage_d3_cpu_ids);
> +}
> --
> 2.25.1
>