[PATCH v4] RDMA/siw: Fix handling of zero-sized Read and Receive Queues.

[Jason Gunthorpe]

On Fri, Jan 08, 2021 at 01:58:45PM +0100, Bernard Metzler wrote:
> During connection setup, the application may choose to zero-size
> inbound and outbound READ queues, as well as the Receive queue.
> This patch fixes handling of zero-sized queues, but not prevents
> it.
> 
> Kamal Heib says in an initial error report:
> When running the blktests over siw the following shift-out-of-bounds is
> reported, this is happening because the passed IRD or ORD from the ulp
> could be zero which will lead to unexpected behavior when calling
> roundup_pow_of_two(), fix that by blocking zero values of ORD or IRD.
> 
> UBSAN: shift-out-of-bounds in ./include/linux/log2.h:57:13
> shift exponent 64 is too large for 64-bit type 'long unsigned int'
> CPU: 20 PID: 3957 Comm: kworker/u64:13 Tainted: G S     5.10.0-rc6 #2
> Hardware name: Dell Inc. PowerEdge R630/02C2CP, BIOS 2.1.5 04/11/2016
> Workqueue: iw_cm_wq cm_work_handler [iw_cm]
> Call Trace:
>  dump_stack+0x99/0xcb
>  ubsan_epilogue+0x5/0x40
>  __ubsan_handle_shift_out_of_bounds.cold.11+0xb4/0xf3
>  ? down_write+0x183/0x3d0
>  siw_qp_modify.cold.8+0x2d/0x32 [siw]
>  ? __local_bh_enable_ip+0xa5/0xf0
>  siw_accept+0x906/0x1b60 [siw]
>  ? xa_load+0x147/0x1f0
>  ? siw_connect+0x17a0/0x17a0 [siw]
>  ? lock_downgrade+0x700/0x700
>  ? siw_get_base_qp+0x1c2/0x340 [siw]
>  ? _raw_spin_unlock_irqrestore+0x39/0x40
>  iw_cm_accept+0x1f4/0x430 [iw_cm]
>  rdma_accept+0x3fa/0xb10 [rdma_cm]
>  ? check_flush_dependency+0x410/0x410
>  ? cma_rep_recv+0x570/0x570 [rdma_cm]
>  nvmet_rdma_queue_connect+0x1a62/0x2680 [nvmet_rdma]
>  ? nvmet_rdma_alloc_cmds+0xce0/0xce0 [nvmet_rdma]
>  ? lock_release+0x56e/0xcc0
>  ? lock_downgrade+0x700/0x700
>  ? lock_downgrade+0x700/0x700
>  ? __xa_alloc_cyclic+0xef/0x350
>  ? __xa_alloc+0x2d0/0x2d0
>  ? rdma_restrack_add+0xbe/0x2c0 [ib_core]
>  ? __ww_mutex_die+0x190/0x190
>  cma_cm_event_handler+0xf2/0x500 [rdma_cm]
>  iw_conn_req_handler+0x910/0xcb0 [rdma_cm]
>  ? _raw_spin_unlock_irqrestore+0x39/0x40
>  ? trace_hardirqs_on+0x1c/0x150
>  ? cma_ib_handler+0x8a0/0x8a0 [rdma_cm]
>  ? __kasan_kmalloc.constprop.7+0xc1/0xd0
>  cm_work_handler+0x121c/0x17a0 [iw_cm]
>  ? iw_cm_reject+0x190/0x190 [iw_cm]
>  ? trace_hardirqs_on+0x1c/0x150
>  process_one_work+0x8fb/0x16c0
>  ? pwq_dec_nr_in_flight+0x320/0x320
>  worker_thread+0x87/0xb40
>  ? __kthread_parkme+0xd1/0x1a0
>  ? process_one_work+0x16c0/0x16c0
>  kthread+0x35f/0x430
>  ? kthread_mod_delayed_work+0x180/0x180
>  ret_from_fork+0x22/0x30
> 
> Fixes: a531975279f3 ("rdma/siw: main include file")
> Fixes: f29dd55b0236 ("rdma/siw: queue pair methods")
> Fixes: 8b6a361b8c48 ("rdma/siw: receive path")
> Fixes: b9be6f18cf9e ("rdma/siw: transmit path")
> Fixes: 303ae1cdfdf7 ("rdma/siw: application interface")
> Reported-by: Kamal Heib <kamalheib1 at gmail.com>
> Reported-by: Yi Zhang <yi.zhang at redhat.com>
> Reported-by: kernel test robot <lkp at intel.com>
> Signed-off-by: Bernard Metzler <bmt at zurich.ibm.com>
> ---
> v2 changes:
> - Fix uninitialized variable introduced in siw_qp_rx.c, as
>   Reported-by: kernel test robot <lkp at intel.com>
> - Add initial error report as
>   Reported-by: Kamal Heib <kamalheib1 at gmail.com>
> 
> v3 changes:
> - correct patch changelog location
> - remove prints for failed queue malloc's as pointed out by
>   Leon Romanovsky
> 
> v4 changes:
> - unwind siw_activate_tx function avoiding confusing
>   goto's as requested by Jason Gunthorp
> 
>  drivers/infiniband/sw/siw/siw.h       |   2 +-
>  drivers/infiniband/sw/siw/siw_qp.c    | 271 ++++++++++++++------------
>  drivers/infiniband/sw/siw/siw_qp_rx.c |  26 ++-
>  drivers/infiniband/sw/siw/siw_qp_tx.c |   4 +-
>  drivers/infiniband/sw/siw/siw_verbs.c |  20 +-
>  5 files changed, 177 insertions(+), 146 deletions(-)

Applied to for-next, thanks

Jason