[RFC PATCH v4 00/27] NVMeTCP Offload ULP and QEDN Device Driver
Shai Malin
smalin at marvell.com
Thu Apr 29 20:08:59 BST 2021
With the goal of enabling a generic infrastructure that allows NVMe/TCP
offload devices like NICs to seamlessly plug into the NVMe-oF stack, this
patch series introduces the nvme-tcp-offload ULP host layer, which will
be a new transport type called "tcp-offload" and will serve as an
abstraction layer to work with vendor specific nvme-tcp offload drivers.
NVMeTCP offload is a full offload of the NVMeTCP protocol, this includes
both the TCP level and the NVMeTCP level.
The nvme-tcp-offload transport can co-exist with the existing tcp and
other transports. The tcp offload was designed so that stack changes are
kept to a bare minimum: only registering new transports.
All other APIs, ops etc. are identical to the regular tcp transport.
Representing the TCP offload as a new transport allows clear and manageable
differentiation between the connections which should use the offload path
and those that are not offloaded (even on the same device).
The nvme-tcp-offload layers and API compared to nvme-tcp and nvme-rdma:
* NVMe layer: *
[ nvme/nvme-fabrics/blk-mq ]
|
(nvme API and blk-mq API)
|
|
* Vendor agnostic transport layer: *
[ nvme-rdma ] [ nvme-tcp ] [ nvme-tcp-offload ]
| | |
(Verbs)
| | |
| (Socket)
| | |
| | (nvme-tcp-offload API)
| | |
| | |
* Vendor Specific Driver: *
| | |
[ qedr ]
| |
[ qede ]
|
[ qedn ]
Performance:
============
With this implementation on top of the Marvell qedn driver (using the
Marvell FastLinQ NIC), we were able to demonstrate the following CPU
utilization improvement:
On AMD EPYC 7402, 2.80GHz, 28 cores:
- For 16K queued read IOs, 16jobs, 4qd (50Gbps line rate):
Improved the CPU utilization from 15.1% with NVMeTCP SW to 4.7% with
NVMeTCP offload.
On Intel(R) Xeon(R) Gold 5122 CPU, 3.60GHz, 16 cores:
- For 512K queued read IOs, 16jobs, 4qd (25Gbps line rate):
Improved the CPU utilization from 16.3% with NVMeTCP SW to 1.1% with
NVMeTCP offload.
In addition, we were able to demonstrate the following latency improvement:
- For 200K read IOPS (16 jobs, 16 qd, with fio rate limiter):
Improved the average latency from 105 usec with NVMeTCP SW to 39 usec
with NVMeTCP offload.
Improved the 99.99 tail latency from 570 usec with NVMeTCP SW to 91 usec
with NVMeTCP offload.
The end-to-end offload latency was measured from fio while running against
back end of null device.
Upstream plan:
==============
Following this RFC, the series will be sent in a modular way so that changes
in each part will not impact the previous part.
- Part 1 (Patches 1-7):
The qed infrastructure, will be sent to 'netdev at vger.kernel.org'.
- Part 2 (Patch 8-15):
The nvme-tcp-offload patches, will be sent to
'linux-nvme at lists.infradead.org'.
- Part 3 (Packet 16-27):
The qedn patches, will be sent to 'linux-nvme at lists.infradead.org'.
Queue Initialization Design:
============================
The nvme-tcp-offload ULP module shall register with the existing
nvmf_transport_ops (.name = "tcp_offload"), nvme_ctrl_ops and blk_mq_ops.
The nvme-tcp-offload vendor driver shall register to nvme-tcp-offload ULP
with the following ops:
- claim_dev() - in order to resolve the route to the target according to
the paired net_dev.
- create_queue() - in order to create offloaded nvme-tcp queue.
The nvme-tcp-offload ULP module shall manage all the controller level
functionalities, call claim_dev and based on the return values shall call
the relevant module create_queue in order to create the admin queue and
the IO queues.
IO-path Design:
===============
The nvme-tcp-offload shall work at the IO-level - the nvme-tcp-offload
ULP module shall pass the request (the IO) to the nvme-tcp-offload vendor
driver and later, the nvme-tcp-offload vendor driver returns the request
completion (the IO completion).
No additional handling is needed in between; this design will reduce the
CPU utilization as we will describe below.
The nvme-tcp-offload vendor driver shall register to nvme-tcp-offload ULP
with the following IO-path ops:
- init_req()
- send_req() - in order to pass the request to the handling of the
offload driver that shall pass it to the vendor specific device.
- poll_queue()
Once the IO completes, the nvme-tcp-offload vendor driver shall call
command.done() that will invoke the nvme-tcp-offload ULP layer to
complete the request.
TCP events:
===========
The Marvell FastLinQ NIC HW engine handle all the TCP re-transmissions
and OOO events.
Teardown and errors:
====================
In case of NVMeTCP queue error the nvme-tcp-offload vendor driver shall
call the nvme_tcp_ofld_report_queue_err.
The nvme-tcp-offload vendor driver shall register to nvme-tcp-offload ULP
with the following teardown ops:
- drain_queue()
- destroy_queue()
The Marvell FastLinQ NIC HW engine:
====================================
The Marvell NIC HW engine is capable of offloading the entire TCP/IP
stack and managing up to 64K connections per PF, already implemented and
upstream use cases for this include iWARP (by the Marvell qedr driver)
and iSCSI (by the Marvell qedi driver).
In addition, the Marvell NIC HW engine offloads the NVMeTCP queue layer
and is able to manage the IO level also in case of TCP re-transmissions
and OOO events.
The HW engine enables direct data placement (including the data digest CRC
calculation and validation) and direct data transmission (including data
digest CRC calculation).
The Marvell qedn driver:
========================
The new driver will be added under "drivers/nvme/hw" and will be enabled
by the Kconfig "Marvell NVM Express over Fabrics TCP offload".
As part of the qedn init, the driver will register as a pci device driver
and will work with the Marvell fastlinQ NIC.
As part of the probe, the driver will register to the nvme_tcp_offload
(ULP) and to the qed module (qed_nvmetcp_ops) - similar to other
"qed_*_ops" which are used by the qede, qedr, qedf and qedi device
drivers.
QEDN Future work:
=================
- Support extended HW resources.
- Digest support.
- Devlink support for device configuration and TCP offload configurations.
- Statistics
Long term future work:
======================
- The nvme-tcp-offload ULP target abstraction layer.
- The Marvell nvme-tcp-offload "qednt" target driver.
Changes since RFC v1:
=====================
- Fix nvme_tcp_ofld_ops return values.
- Remove NVMF_TRTYPE_TCP_OFFLOAD.
- Add nvme_tcp_ofld_poll() implementation.
- Fix nvme_tcp_ofld_queue_rq() to check map_sg() and send_req() return
values.
Changes since RFC v2:
=====================
- Add qedn - Marvell's NVMeTCP HW offload vendor driver init and probe
(patches 8-11).
- Fixes in controller and queue level (patches 3-6).
Changes since RFC v3:
=====================
- Add the full implementation of the nvme-tcp-offload layer including the
new ops: setup_ctrl(), release_ctrl(), commit_rqs() and new flows (ASYNC
and timeout).
- Add nvme-tcp-offload device maximums: max_hw_sectors, max_segments.
- Add nvme-tcp-offload layer design and optimization changes.
- Add the qedn full implementation for the conn level, IO path and error
handling.
- Add qed support for the new AHP HW.
Arie Gershberg (3):
nvme-fabrics: Move NVMF_ALLOWED_OPTS and NVMF_REQUIRED_OPTS
definitions
nvme-tcp-offload: Add controller level implementation
nvme-tcp-offload: Add controller level error recovery implementation
Dean Balandin (3):
nvme-tcp-offload: Add device scan implementation
nvme-tcp-offload: Add queue level implementation
nvme-tcp-offload: Add IO level implementation
Nikolay Assa (2):
qed: Add IP services APIs support
qedn: Add qedn_claim_dev API support
Omkar Kulkarni (1):
qed: Add qed-NVMeTCP personality
Prabhakar Kushwaha (6):
qed: Add support of HW filter block
qedn: Add connection-level slowpath functionality
qedn: Add support of configuring HW filter block
qedn: Add support of Task and SGL
qedn: Add support of NVME ICReq & ICResp
qedn: Add support of ASYNC
Shai Malin (12):
qed: Add NVMeTCP Offload PF Level FW and HW HSI
qed: Add NVMeTCP Offload Connection Level FW and HW HSI
qed: Add NVMeTCP Offload IO Level FW and HW HSI
qed: Add NVMeTCP Offload IO Level FW Initializations
nvme-tcp-offload: Add nvme-tcp-offload - NVMeTCP HW offload ULP
nvme-tcp-offload: Add Timeout and ASYNC Support
qedn: Add qedn - Marvell's NVMeTCP HW offload vendor driver
qedn: Add qedn probe
qedn: Add IRQ and fast-path resources initializations
qedn: Add IO level nvme_req and fw_cq workqueues
qedn: Add IO level fastpath functionality
qedn: Add Connection and IO level recovery flows
MAINTAINERS | 10 +
drivers/net/ethernet/qlogic/Kconfig | 3 +
drivers/net/ethernet/qlogic/qed/Makefile | 5 +
drivers/net/ethernet/qlogic/qed/qed.h | 16 +
drivers/net/ethernet/qlogic/qed/qed_cxt.c | 32 +
drivers/net/ethernet/qlogic/qed/qed_cxt.h | 1 +
drivers/net/ethernet/qlogic/qed/qed_dev.c | 151 +-
drivers/net/ethernet/qlogic/qed/qed_hsi.h | 4 +-
drivers/net/ethernet/qlogic/qed/qed_ll2.c | 31 +-
drivers/net/ethernet/qlogic/qed/qed_mcp.c | 3 +
drivers/net/ethernet/qlogic/qed/qed_mng_tlv.c | 3 +-
drivers/net/ethernet/qlogic/qed/qed_nvmetcp.c | 868 +++++++++++
drivers/net/ethernet/qlogic/qed/qed_nvmetcp.h | 114 ++
.../qlogic/qed/qed_nvmetcp_fw_funcs.c | 372 +++++
.../qlogic/qed/qed_nvmetcp_fw_funcs.h | 43 +
.../qlogic/qed/qed_nvmetcp_ip_services.c | 239 +++
drivers/net/ethernet/qlogic/qed/qed_ooo.c | 5 +-
drivers/net/ethernet/qlogic/qed/qed_sp.h | 5 +
.../net/ethernet/qlogic/qed/qed_sp_commands.c | 1 +
drivers/nvme/Kconfig | 1 +
drivers/nvme/Makefile | 1 +
drivers/nvme/host/Kconfig | 16 +
drivers/nvme/host/Makefile | 3 +
drivers/nvme/host/fabrics.c | 7 -
drivers/nvme/host/fabrics.h | 7 +
drivers/nvme/host/tcp-offload.c | 1330 +++++++++++++++++
drivers/nvme/host/tcp-offload.h | 209 +++
drivers/nvme/hw/Kconfig | 9 +
drivers/nvme/hw/Makefile | 3 +
drivers/nvme/hw/qedn/Makefile | 4 +
drivers/nvme/hw/qedn/qedn.h | 435 ++++++
drivers/nvme/hw/qedn/qedn_conn.c | 999 +++++++++++++
drivers/nvme/hw/qedn/qedn_main.c | 1153 ++++++++++++++
drivers/nvme/hw/qedn/qedn_task.c | 977 ++++++++++++
include/linux/qed/common_hsi.h | 1 +
include/linux/qed/nvmetcp_common.h | 616 ++++++++
include/linux/qed/qed_if.h | 22 +
include/linux/qed/qed_nvmetcp_if.h | 244 +++
.../linux/qed/qed_nvmetcp_ip_services_if.h | 29 +
39 files changed, 7947 insertions(+), 25 deletions(-)
create mode 100644 drivers/net/ethernet/qlogic/qed/qed_nvmetcp.c
create mode 100644 drivers/net/ethernet/qlogic/qed/qed_nvmetcp.h
create mode 100644 drivers/net/ethernet/qlogic/qed/qed_nvmetcp_fw_funcs.c
create mode 100644 drivers/net/ethernet/qlogic/qed/qed_nvmetcp_fw_funcs.h
create mode 100644 drivers/net/ethernet/qlogic/qed/qed_nvmetcp_ip_services.c
create mode 100644 drivers/nvme/host/tcp-offload.c
create mode 100644 drivers/nvme/host/tcp-offload.h
create mode 100644 drivers/nvme/hw/Kconfig
create mode 100644 drivers/nvme/hw/Makefile
create mode 100644 drivers/nvme/hw/qedn/Makefile
create mode 100644 drivers/nvme/hw/qedn/qedn.h
create mode 100644 drivers/nvme/hw/qedn/qedn_conn.c
create mode 100644 drivers/nvme/hw/qedn/qedn_main.c
create mode 100644 drivers/nvme/hw/qedn/qedn_task.c
create mode 100644 include/linux/qed/nvmetcp_common.h
create mode 100644 include/linux/qed/qed_nvmetcp_if.h
create mode 100644 include/linux/qed/qed_nvmetcp_ip_services_if.h
--
2.22.0
More information about the Linux-nvme
mailing list