[PATCH 1/4] nvmet: change sn size and check validity
Max Gurtovoy
mgurtovoy at nvidia.com
Thu Apr 22 09:50:42 BST 2021
On 4/20/2021 8:35 PM, Chaitanya Kulkarni wrote:
> On 4/20/21 02:09, Max Gurtovoy wrote:
>> From: Noam Gottlieb <ngottlieb at nvidia.com>
>>
>> According to the NVM specification, the serial_number should be 20 bytes
>> (bytes 23:04 of the Identify Controller data structure), and should
>> contain only ASCII characters.
>>
>> In accordance, the serial_number size is changed to 20 bytes and before
>> any attempt to store a new value in serial_number we check that the
>> input is valid - i.e. contains only ASCII characters, is not empty and
>> does not exceed 20 bytes.
>>
>> Reviewed-by: Max Gurtovoy <mgurtovoy at nvidia.com>
>> Signed-off-by: Noam Gottlieb <ngottlieb at nvidia.com>
>> ---
>> drivers/nvme/target/admin-cmd.c | 4 +---
>> drivers/nvme/target/configfs.c | 36 ++++++++++++++++++++++++---------
>> drivers/nvme/target/core.c | 4 +++-
>> drivers/nvme/target/discovery.c | 4 +---
>> drivers/nvme/target/nvmet.h | 3 ++-
>> 5 files changed, 33 insertions(+), 18 deletions(-)
>>
>> diff --git a/drivers/nvme/target/admin-cmd.c b/drivers/nvme/target/admin-cmd.c
>> index d2a26ff3f7b3..91eb7562a88a 100644
>> --- a/drivers/nvme/target/admin-cmd.c
>> +++ b/drivers/nvme/target/admin-cmd.c
>> @@ -357,9 +357,7 @@ static void nvmet_execute_identify_ctrl(struct nvmet_req *req)
>> id->vid = 0;
>> id->ssvid = 0;
>>
>> - memset(id->sn, ' ', sizeof(id->sn));
>> - bin2hex(id->sn, &ctrl->subsys->serial,
>> - min(sizeof(ctrl->subsys->serial), sizeof(id->sn) / 2));
>> + memcpy(id->sn, ctrl->subsys->serial, NVMET_SN_MAX_SIZE);
>> memcpy_and_pad(id->mn, sizeof(id->mn), subsys->model_number,
>> strlen(subsys->model_number), ' ');
>> memcpy_and_pad(id->fr, sizeof(id->fr),
>> diff --git a/drivers/nvme/target/configfs.c b/drivers/nvme/target/configfs.c
>> index 65a0cf99f557..576540fdba73 100644
>> --- a/drivers/nvme/target/configfs.c
>> +++ b/drivers/nvme/target/configfs.c
>> @@ -1030,24 +1030,46 @@ static ssize_t nvmet_subsys_attr_version_store(struct config_item *item,
>> }
>> CONFIGFS_ATTR(nvmet_subsys_, attr_version);
>>
>> +/* See Section 1.5 of NVMe 1.4 */
>> +static bool nvmet_is_ascii(const char c)
>> +{
>> + return c >= 0x20 && c <= 0x7e;
>> +}
>> +
>> static ssize_t nvmet_subsys_attr_serial_show(struct config_item *item,
>> char *page)
>> {
>> struct nvmet_subsys *subsys = to_subsys(item);
>>
>> - return snprintf(page, PAGE_SIZE, "%llx\n", subsys->serial);
>> + return snprintf(page, PAGE_SIZE, "%s\n", subsys->serial);
>> }
>>
>> static ssize_t nvmet_subsys_attr_serial_store(struct config_item *item,
>> const char *page, size_t count)
>> {
>> - u64 serial;
>> + struct nvmet_subsys *subsys;
>> + int pos, len;
>> +
>> + subsys = to_subsys(item);
>> + len = strcspn(page, "\n");
>>
> nit:- we can avoid two extra initialization lines with :-
>
> struct nvmet_subsys *subsys = to_subsys(item);
> size_t pos, len = strcspn(page, "\n");
>
>> - if (sscanf(page, "%llx\n", &serial) != 1)
>> + if (len == 0 || len > NVMET_SN_MAX_SIZE) {
> nit:- 's/len == 0/!len/' is pretty common in the code.
Ok.
>> + pr_err("Serial Number can not be empty or exceed %d Bytes\n",
>> + NVMET_SN_MAX_SIZE);
>> return -EINVAL;
>> + }
>> +
>> + for (pos = 0; pos < len; pos++) {
>> + if (!nvmet_is_ascii(page[pos])) {
>> + pr_err("Serial Number must contain only ASCII strings\n");
>> + return -EINVAL;
>> + }
>> + }
>>
>> down_write(&nvmet_config_sem);
>> - to_subsys(item)->serial = serial;
>> + mutex_lock(&subsys->lock);
>> + memcpy_and_pad(subsys->serial, NVMET_SN_MAX_SIZE, page, len, ' ');
>> + mutex_unlock(&subsys->lock);
>> up_write(&nvmet_config_sem);
>>
>> return count;
>> @@ -1128,12 +1150,6 @@ static ssize_t nvmet_subsys_attr_model_show(struct config_item *item,
>> return ret;
>> }
>>
>> -/* See Section 1.5 of NVMe 1.4 */
>> -static bool nvmet_is_ascii(const char c)
>> -{
>> - return c >= 0x20 && c <= 0x7e;
>> -}
>> -
>> static ssize_t nvmet_subsys_attr_model_store_locked(struct nvmet_subsys *subsys,
>> const char *page, size_t count)
>> {
>> diff --git a/drivers/nvme/target/core.c b/drivers/nvme/target/core.c
>> index adbede9ab7f3..3efd48b0a34e 100644
>> --- a/drivers/nvme/target/core.c
>> +++ b/drivers/nvme/target/core.c
>> @@ -1482,6 +1482,7 @@ struct nvmet_subsys *nvmet_subsys_alloc(const char *subsysnqn,
>> enum nvme_subsys_type type)
>> {
>> struct nvmet_subsys *subsys;
>> + char serial[NVMET_SN_MAX_SIZE / 2];
> This needs a comment why NVMET_SN_MAX_SIZE / 2.
explain bin2hex ?
>>
>> subsys = kzalloc(sizeof(*subsys), GFP_KERNEL);
>> if (!subsys)
>> @@ -1489,7 +1490,8 @@ struct nvmet_subsys *nvmet_subsys_alloc(const char *subsysnqn,
>>
>> subsys->ver = NVMET_DEFAULT_VS;
>> /* generate a random serial number as our controllers are ephemeral: */
>> - get_random_bytes(&subsys->serial, sizeof(subsys->serial));
>> + get_random_bytes(&serial, sizeof(serial));
>> + bin2hex(subsys->serial, &serial, sizeof(serial));
>>
>> switch (type) {
>> case NVME_NQN_NVME:
>> diff --git a/drivers/nvme/target/discovery.c b/drivers/nvme/target/discovery.c
>> index 4845d12e374a..f39946615fd6 100644
>> --- a/drivers/nvme/target/discovery.c
>> +++ b/drivers/nvme/target/discovery.c
>> @@ -262,9 +262,7 @@ static void nvmet_execute_disc_identify(struct nvmet_req *req)
>> goto out;
>> }
>>
>> - memset(id->sn, ' ', sizeof(id->sn));
>> - bin2hex(id->sn, &ctrl->subsys->serial,
>> - min(sizeof(ctrl->subsys->serial), sizeof(id->sn) / 2));
>> + memcpy(id->sn, ctrl->subsys->serial, NVMET_SN_MAX_SIZE);
>> memset(id->fr, ' ', sizeof(id->fr));
>> memcpy_and_pad(id->mn, sizeof(id->mn), model, sizeof(model) - 1, ' ');
>> memcpy_and_pad(id->fr, sizeof(id->fr),
>> diff --git a/drivers/nvme/target/nvmet.h b/drivers/nvme/target/nvmet.h
>> index 5566ed403576..53999bd259ed 100644
>> --- a/drivers/nvme/target/nvmet.h
>> +++ b/drivers/nvme/target/nvmet.h
>> @@ -28,6 +28,7 @@
>> #define NVMET_NO_ERROR_LOC ((u16)-1)
>> #define NVMET_DEFAULT_CTRL_MODEL "Linux"
>> #define NVMET_MN_MAX_SIZE 40
>> +#define NVMET_SN_MAX_SIZE 20
>>
>> /*
>> * Supported optional AENs:
>> @@ -229,7 +230,7 @@ struct nvmet_subsys {
>> u16 max_qid;
>>
>> u64 ver;
>> - u64 serial;
>> + char serial[NVMET_SN_MAX_SIZE];
>> char *subsysnqn;
>> bool pi_support;
>>
More information about the Linux-nvme
mailing list