[PATCH] nvme-pci: disable write zeros command for Intel 600P/P3100

David Milburn dmilburn at redhat.com
Thu Sep 10 17:18:50 EDT 2020


The write zeros command does not work with 4k range.

bash-4.4# ./blkdiscard /dev/nvme0n1p2
bash-4.4# strace -efallocate xfs_io -c "fzero 536895488 2048" /dev/nvme0n1p2
fallocate(3, FALLOC_FL_ZERO_RANGE, 536895488, 2048) = 0
+++ exited with 0 +++
bash-4.4# dd bs=1 if=/dev/nvme0n1p2 skip=536895488 count=512 | hexdump -C
00000000  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
00000200

bash-4.4# ./blkdiscard /dev/nvme0n1p2
bash-4.4# strace -efallocate xfs_io -c "fzero 536895488 4096" /dev/nvme0n1p2
fallocate(3, FALLOC_FL_ZERO_RANGE, 536895488, 4096) = 0
+++ exited with 0 +++
bash-4.4# dd bs=1 if=/dev/nvme0n1p2 skip=536895488 count=512 | hexdump -C
00000000  5c 61 5c b0 96 21 1b 5e  85 0c 07 32 9c 8c eb 3c  |\a\..!.^...2...<|
00000010  4a a2 06 ca 67 15 2d 8e  29 8d a8 a0 7e 46 8c 62  |J...g.-.)...~F.b|
00000020  bb 4c 6c c1 6b f5 ae a5  e4 a9 bc 93 4f 60 ff 7a  |.Ll.k.......O`.z|

Reported-by: Eric Sandeen <esandeen at redhat.com>
Signed-off-by: David Milburn <dmilburn at redhat.com>
---
 drivers/nvme/host/pci.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index 5e07d5628864..d31e298669a9 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -3153,7 +3153,8 @@ static const struct pci_device_id nvme_id_table[] = {
 	{ PCI_VDEVICE(INTEL, 0xf1a5),	/* Intel 600P/P3100 */
 		.driver_data = NVME_QUIRK_NO_DEEPEST_PS |
 				NVME_QUIRK_MEDIUM_PRIO_SQ |
-				NVME_QUIRK_NO_TEMP_THRESH_CHANGE },
+				NVME_QUIRK_NO_TEMP_THRESH_CHANGE |
+				NVME_QUIRK_DISABLE_WRITE_ZEROES, },
 	{ PCI_VDEVICE(INTEL, 0xf1a6),	/* Intel 760p/Pro 7600p */
 		.driver_data = NVME_QUIRK_IGNORE_DEV_SUBNQN, },
 	{ PCI_VDEVICE(INTEL, 0x5845),	/* Qemu emulated controller */
-- 
2.18.1




More information about the Linux-nvme mailing list