[PATCH 2/2] block: add BLKSETDESCZONE ioctl for Zoned Block Devices

Javier González javier at javigon.com
Tue Jul 7 04:43:20 EDT 2020


On 03.07.2020 09:44, Matias Bjorling wrote:
>> -----Original Message-----
>> From: Javier González <javier at javigon.com>
>> Sent: Monday, 29 June 2020 21.39
>> To: Damien Le Moal <Damien.LeMoal at wdc.com>
>> Cc: Matias Bjorling <Matias.Bjorling at wdc.com>; axboe at kernel.dk;
>> kbusch at kernel.org; hch at lst.de; sagi at grimberg.me;
>> martin.petersen at oracle.com; Niklas Cassel <Niklas.Cassel at wdc.com>; Hans
>> Holmberg <Hans.Holmberg at wdc.com>; linux-scsi at vger.kernel.org; linux-
>> kernel at vger.kernel.org; linux-block at vger.kernel.org; linux-
>> nvme at lists.infradead.org
>> Subject: Re: [PATCH 2/2] block: add BLKSETDESCZONE ioctl for Zoned Block
>> Devices
>>
>> On 29.06.2020 01:00, Damien Le Moal wrote:
>> >On 2020/06/29 8:01, Matias Bjorling wrote:
>> >> The NVMe Zoned Namespace Command Set adds support for associating
>> >> data to a zone through the Zone Descriptor Extension feature.
>> >>
>> >> To allow user-space to associate data to a zone, add support through
>> >> the BLKSETDESCZONE ioctl. The ioctl requires that it is issued to a
>> >> zoned block device, and that it supports the Zone Descriptor
>> >> Extension feature. Support is detected through the the
>> >> zone_desc_ext_bytes sysfs queue entry for the specific block device.
>> >> A value larger than zero communicates that the device supports the
>> >> feature.
>>
>> Have you considered the possibility of adding this an action to a IOCTL that
>> looks like the zone management one we discussed last week? We would start
>> saving IOCTLs already if we count the offline transition and this one.
>
>Yes, I considered it. Damien and Christoph have asked for it to separate ioctls.

Ok.

>
>>
>> >>
>> >> The ioctl associates data to a zone by issuing a Zone Management Send
>> >> command with the Zone Send Action set as the Set Zone Descriptor
>> >> Extension.
>> >>
>> >> For the command to complete successfully, the specified zone must be
>> >> in the Empty state, and active resources must be available. On
>> >> success, the specified zone is transioned to Closed state by the
>> >> device. If less data is supplied by user-space then reported by the
>> >> the Zone Descriptor Extension size, the rest is zero-filled. If more
>> >> data or no data is supplied by user-space, the ioctl fails.
>> >>
>> >> To issue the ioctl, a new blk_zone_set_desc data structure is defined.
>> >> It has following parameters:
>> >>
>> >>  * the sector of the specific zone.
>> >>  * the length of the data to be associated to the zone.
>> >>  * any flags be used by the ioctl. None is defined.
>> >>  * data associated to the zone.
>> >>
>> >> The data is laid out after the flags parameter, and it is the
>> >> caller's responsibility to allocate memory for the data that is
>> >> specified in the length parameter.
>> >>
>> >> Signed-off-by: Matias Bjørling <matias.bjorling at wdc.com>
>> >> ---
>> >>  block/blk-zoned.c             | 108 ++++++++++++++++++++++++++++++++++
>> >>  block/ioctl.c                 |   2 +
>> >>  drivers/nvme/host/core.c      |   3 +
>> >>  drivers/nvme/host/nvme.h      |   9 +++
>> >>  drivers/nvme/host/zns.c       |  11 ++++
>> >>  include/linux/blk_types.h     |   2 +
>> >>  include/linux/blkdev.h        |   9 ++-
>> >>  include/uapi/linux/blkzoned.h |  20 ++++++-
>> >>  8 files changed, 162 insertions(+), 2 deletions(-)
>> >>
>> >> diff --git a/block/blk-zoned.c b/block/blk-zoned.c index
>> >> 81152a260354..4dc40ec006a2 100644
>> >> --- a/block/blk-zoned.c
>> >> +++ b/block/blk-zoned.c
>> >> @@ -259,6 +259,50 @@ int blkdev_zone_mgmt(struct block_device *bdev,
>> >> enum req_opf op,  }  EXPORT_SYMBOL_GPL(blkdev_zone_mgmt);
>> >>
>> >> +/**
>> >> + * blkdev_zone_set_desc - Execute a zone management set zone
>> descriptor
>> >> + *                        extension operation on a zone
>> >> + * @bdev:	Target block device
>> >> + * @sector:	Start sector of the zone to operate on
>> >> + * @data:	Pointer to the data that is to be associated to the zone
>> >> + * @gfp_mask:	Memory allocation flags (for bio_alloc)
>> >> + *
>> >> + * Description:
>> >> + *    Associate zone descriptor extension data to a specified zone.
>> >> + *    The block device must support zone descriptor extensions.
>> >> + *    i.e., by exposing a positive zone descriptor extension size.
>> >> + */
>> >> +int blkdev_zone_set_desc(struct block_device *bdev, sector_t sector,
>> >> +			 struct page *data, gfp_t gfp_mask)
>> >
>> >struct page for the data ? Why not just a "void *" to allow for
>> >kmalloc/vmalloc data ? And no length for the data ? This is a bit odd.
>> >
>> >> +{
>> >> +	struct request_queue *q = bdev_get_queue(bdev);
>> >> +	sector_t zone_sectors = blk_queue_zone_sectors(q);
>> >> +	struct bio_vec bio_vec;
>> >> +	struct bio bio;
>> >> +
>> >> +	if (!blk_queue_is_zoned(q))
>> >> +		return -EOPNOTSUPP;
>> >> +
>> >> +	if (bdev_read_only(bdev))
>> >> +		return -EPERM;
>> >
>> >You are not checking the zone_desc_ext_bytes limit here. You should.
>> >> +
>> >> +	/* Check alignment (handle eventual smaller last zone) */
>> >> +	if (sector & (zone_sectors - 1))
>> >> +		return -EINVAL;
>> >
>> >The comment is incorrect. There is nothing special for handling the
>> >last zone in this test.
>> >
>> >> +
>> >> +	bio_init(&bio, &bio_vec, 1);
>> >> +	bio.bi_opf = REQ_OP_ZONE_SET_DESC | REQ_SYNC;
>> >> +	bio.bi_iter.bi_sector = sector;
>> >> +	bio_set_dev(&bio, bdev);
>> >> +	bio_add_page(&bio, data, queue_zone_desc_ext_bytes(q), 0);
>> >> +
>> >> +	/* This may take a while, so be nice to others */
>> >> +	cond_resched();
>> >
>> >This is not a loop, so you do not need this.
>> >
>> >> +
>> >> +	return submit_bio_wait(&bio);
>> >> +}
>> >> +EXPORT_SYMBOL_GPL(blkdev_zone_set_desc);
>> >> +
>> >>  struct zone_report_args {
>> >>  	struct blk_zone __user *zones;
>> >>  };
>> >> @@ -370,6 +414,70 @@ int blkdev_zone_mgmt_ioctl(struct block_device
>> *bdev, fmode_t mode,
>> >>  				GFP_KERNEL);
>> >>  }
>> >>
>> >> +/*
>> >> + * BLKSETDESCZONE ioctl processing.
>> >> + * Called from blkdev_ioctl.
>> >> + */
>> >> +int blkdev_zone_set_desc_ioctl(struct block_device *bdev, fmode_t
>> mode,
>> >> +			       unsigned int cmd, unsigned long arg) {
>> >> +	void __user *argp = (void __user *)arg;
>> >> +	struct request_queue *q;
>> >> +	struct blk_zone_set_desc zsd;
>> >> +	void *zsd_data;
>> >> +	int ret;
>> >> +
>> >> +	if (!argp)
>> >> +		return -EINVAL;
>> >> +
>> >> +	q = bdev_get_queue(bdev);
>> >> +	if (!q)
>> >> +		return -ENXIO;
>> >> +
>> >> +	if (!blk_queue_is_zoned(q))
>> >> +		return -ENOTTY;
>> >> +
>> >> +	if (!capable(CAP_SYS_ADMIN))
>> >> +		return -EACCES;
>> >> +
>> >> +	if (!(mode & FMODE_WRITE))
>> >> +		return -EBADF;
>> >> +
>> >> +	if (!queue_zone_desc_ext_bytes(q))
>> >> +		return -EOPNOTSUPP;
>> >> +
>> >> +	if (copy_from_user(&zsd, argp, sizeof(struct blk_zone_set_desc)))
>> >> +		return -EFAULT;
>> >> +
>> >> +	/* no flags is currently supported */
>> >> +	if (zsd.flags)
>> >> +		return -ENOTTY;
>> >> +
>> >> +	if (!zsd.len || zsd.len > queue_zone_desc_ext_bytes(q))
>> >> +		return -ENOTTY;
>> >
>> >This should go into blkdev_zone_set_desc() as well so that in-kernel
>> >users are checked. So there may be no need to check this here.
>> >
>> >> +
>> >> +	/* allocate the size of the zone descriptor extension and fill
>> >> +	 * with the data in the user data buffer. If the data size is less
>> >> +	 * than the zone descriptor extension size, then the rest of the
>> >> +	 * zone description extension data buffer is zero-filled.
>> >> +	 */
>> >> +	zsd_data = (void *) get_zeroed_page(GFP_KERNEL);
>> >> +	if (!zsd_data)
>> >> +		return -ENOMEM;
>> >> +
>> >> +	if (copy_from_user(zsd_data, argp + sizeof(struct blk_zone_set_desc),
>> >> +			   zsd.len)) {
>> >> +		ret = -EFAULT;
>> >> +		goto free;
>> >> +	}
>> >> +
>> >> +	ret = blkdev_zone_set_desc(bdev, zsd.sector, virt_to_page(zsd_data),
>> >> +	      GFP_KERNEL);
>> >> +free:
>> >> +	free_page((unsigned long) zsd_data);
>> >> +	return ret;
>> >> +}
>> >> +
>> >>  static inline unsigned long *blk_alloc_zone_bitmap(int node,
>> >>  						   unsigned int nr_zones)
>> >>  {
>> >> diff --git a/block/ioctl.c b/block/ioctl.c index
>> >> bdb3bbb253d9..b9744705835b 100644
>> >> --- a/block/ioctl.c
>> >> +++ b/block/ioctl.c
>> >> @@ -515,6 +515,8 @@ static int blkdev_common_ioctl(struct block_device
>> *bdev, fmode_t mode,
>> >>  	case BLKCLOSEZONE:
>> >>  	case BLKFINISHZONE:
>> >>  		return blkdev_zone_mgmt_ioctl(bdev, mode, cmd, arg);
>> >> +	case BLKSETDESCZONE:
>> >> +		return blkdev_zone_set_desc_ioctl(bdev, mode, cmd, arg);
>> >>  	case BLKGETZONESZ:
>> >>  		return put_uint(argp, bdev_zone_sectors(bdev));
>> >>  	case BLKGETNRZONES:
>> >> diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
>> >> index e961910da4ac..b8f25b0d00ad 100644
>> >> --- a/drivers/nvme/host/core.c
>> >> +++ b/drivers/nvme/host/core.c
>> >> @@ -776,6 +776,9 @@ blk_status_t nvme_setup_cmd(struct nvme_ns *ns,
>> struct request *req,
>> >>  	case REQ_OP_ZONE_FINISH:
>> >>  		ret = nvme_setup_zone_mgmt_send(ns, req, cmd,
>> NVME_ZONE_FINISH);
>> >>  		break;
>> >> +	case REQ_OP_ZONE_SET_DESC:
>> >> +		ret = nvme_setup_zone_set_desc(ns, req, cmd);
>> >> +		break;
>> >>  	case REQ_OP_WRITE_ZEROES:
>> >>  		ret = nvme_setup_write_zeroes(ns, req, cmd);
>> >>  		break;
>> >> diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h
>> >> index 662f95fbd909..5bd5a437b038 100644
>> >> --- a/drivers/nvme/host/nvme.h
>> >> +++ b/drivers/nvme/host/nvme.h
>> >> @@ -708,6 +708,9 @@ int nvme_report_zones(struct gendisk *disk,
>> >> sector_t sector,  blk_status_t nvme_setup_zone_mgmt_send(struct
>> nvme_ns *ns, struct request *req,
>> >>  				       struct nvme_command *cmnd,
>> >>  				       enum nvme_zone_mgmt_action action);
>> >> +
>> >> +blk_status_t nvme_setup_zone_set_desc(struct nvme_ns *ns, struct
>> request *req,
>> >> +				       struct nvme_command *cmnd);
>> >>  #else
>> >>  #define nvme_report_zones NULL
>> >>
>> >> @@ -718,6 +721,12 @@ static inline blk_status_t
>> nvme_setup_zone_mgmt_send(struct nvme_ns *ns,
>> >>  	return BLK_STS_NOTSUPP;
>> >>  }
>> >>
>> >> +static inline blk_status_t nvme_setup_zone_set_desc(struct nvme_ns *ns,
>> >> +		struct request *req, struct nvme_command *cmnd) {
>> >> +	return BLK_STS_NOTSUPP;
>> >> +}
>> >> +
>> >>  static inline int nvme_update_zone_info(struct gendisk *disk,
>> >>  					struct nvme_ns *ns,
>> >>  					unsigned lbaf)
>> >> diff --git a/drivers/nvme/host/zns.c b/drivers/nvme/host/zns.c index
>> >> 5792d953a8f3..bfa64cc685d3 100644
>> >> --- a/drivers/nvme/host/zns.c
>> >> +++ b/drivers/nvme/host/zns.c
>> >> @@ -239,3 +239,14 @@ blk_status_t
>> nvme_setup_zone_mgmt_send(struct
>> >> nvme_ns *ns, struct request *req,
>> >>
>> >>  	return BLK_STS_OK;
>> >>  }
>> >> +
>> >> +blk_status_t nvme_setup_zone_set_desc(struct nvme_ns *ns, struct
>> request *req,
>> >> +		struct nvme_command *c)
>> >> +{
>> >> +	c->zms.opcode = nvme_cmd_zone_mgmt_send;
>> >> +	c->zms.nsid = cpu_to_le32(ns->head->ns_id);
>> >> +	c->zms.slba = cpu_to_le64(nvme_sect_to_lba(ns, blk_rq_pos(req)));
>> >> +	c->zms.action = NVME_ZONE_SET_DESC_EXT;
>> >> +
>> >> +	return BLK_STS_OK;
>> >> +}
>> >> diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h
>> >> index ccb895f911b1..53b7b05b0004 100644
>> >> --- a/include/linux/blk_types.h
>> >> +++ b/include/linux/blk_types.h
>> >> @@ -316,6 +316,8 @@ enum req_opf {
>> >>  	REQ_OP_ZONE_FINISH	= 12,
>> >>  	/* write data at the current zone write pointer */
>> >>  	REQ_OP_ZONE_APPEND	= 13,
>> >> +	/* associate zone desc extension data to a zone */
>> >> +	REQ_OP_ZONE_SET_DESC	= 14,
>> >>
>> >>  	/* SCSI passthrough using struct scsi_request */
>> >>  	REQ_OP_SCSI_IN		= 32,
>> >> diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index
>> >> 2ed55055f68d..c5f092dd5aa3 100644
>> >> --- a/include/linux/blkdev.h
>> >> +++ b/include/linux/blkdev.h
>> >> @@ -370,7 +370,8 @@ extern int blkdev_report_zones_ioctl(struct
>> block_device *bdev, fmode_t mode,
>> >>  				     unsigned int cmd, unsigned long arg);
>> extern int
>> >> blkdev_zone_mgmt_ioctl(struct block_device *bdev, fmode_t mode,
>> >>  				  unsigned int cmd, unsigned long arg);
>> >> -
>> >> +extern int blkdev_zone_set_desc_ioctl(struct block_device *bdev,
>> fmode_t mode,
>> >> +				      unsigned int cmd, unsigned long arg);
>> >>  #else /* CONFIG_BLK_DEV_ZONED */
>> >>
>> >>  static inline unsigned int blkdev_nr_zones(struct gendisk *disk) @@
>> >> -392,6 +393,12 @@ static inline int blkdev_zone_mgmt_ioctl(struct
>> block_device *bdev,
>> >>  	return -ENOTTY;
>> >>  }
>> >>
>> >> +static inline int blkdev_zone_set_desc_ioctl(struct block_device *bdev,
>> >> +					     fmode_t mode, unsigned int cmd,
>> >> +					     unsigned long arg)
>> >> +{
>> >> +	return -ENOTTY;
>> >> +}
>> >>  #endif /* CONFIG_BLK_DEV_ZONED */
>> >>
>> >>  struct request_queue {
>> >> diff --git a/include/uapi/linux/blkzoned.h
>> >> b/include/uapi/linux/blkzoned.h index 42c3366cc25f..68abda9abf33
>> >> 100644
>> >> --- a/include/uapi/linux/blkzoned.h
>> >> +++ b/include/uapi/linux/blkzoned.h
>> >> @@ -142,6 +142,20 @@ struct blk_zone_range {
>> >>  	__u64		nr_sectors;
>> >>  };
>> >>
>> >> +/**
>> >> + * struct blk_zone_set_desc - BLKSETDESCZONE ioctl requests
>> >> + * @sector: Starting sector of the zone to operate on.
>> >> + * @flags: Feature flags.
>> >> + * @len: size, in bytes, of the data to be associated to the zone.
>> >> + * @data: data to be associated.
>> >> + */
>> >> +struct blk_zone_set_desc {
>> >> +	__u64		sector;
>> >> +	__u32		flags;
>> >> +	__u32		len;
>> >> +	__u8		data[0];
>> >> +};
>>
>> Would it make sense to add nr_sectors if the host wants to associate the same
>> metadata to several zones. The use case would be the grouping of larger zones
>> in software.
>
>I believe we get into atomicity concerns if we do ranges, and action
>only supports a single zone. I like to align with the ZNS API as much
>as possible, and let the user-space application track errors per set
>desc ext action.

The atomicity concerns should be the same as current zone management
using nr_sectors, and these are already being supported for open, close,
etc.

TBH, the comment is most about making sure that the IOCTL is extendable
from conception.

>
>>
>> >> +
>> >>  /**
>> >>   * Zoned block device ioctl's:
>> >>   *
>> >> @@ -158,6 +172,10 @@ struct blk_zone_range {
>> >>   *                The 512 B sector range must be zone aligned.
>> >>   * @BLKFINISHZONE: Mark the zones as full in the specified sector range.
>> >>   *                 The 512 B sector range must be zone aligned.
>> >> + * @BLKSETDESCZONE: Set zone description extension data for the zone
>> >> + *                  in the specified sector. On success, the zone
>> >> + *                  will transition to the closed zone state.
>> >> + *                  The 512B sector must be zone aligned.
>> >>   */
>> >>  #define BLKREPORTZONE	_IOWR(0x12, 130, struct blk_zone_report)
>> >>  #define BLKRESETZONE	_IOW(0x12, 131, struct blk_zone_range)
>> >> @@ -166,5 +184,5 @@ struct blk_zone_range {
>> >>  #define BLKOPENZONE	_IOW(0x12, 134, struct blk_zone_range)
>> >>  #define BLKCLOSEZONE	_IOW(0x12, 135, struct blk_zone_range)
>> >>  #define BLKFINISHZONE	_IOW(0x12, 136, struct blk_zone_range)
>> >> -
>> >> +#define BLKSETDESCZONE	_IOW(0x12, 137, struct blk_zone_set_desc)
>> >>  #endif /* _UAPI_BLKZONED_H */
>> >>
>> >
>> >How to you retreive an extended descriptor that was set ? I do not see
>> >any code doing that. Report zones is not changed, but I would leave
>> >that one as is and implement a BLKGETDESCZONE ioctl & in-kernel API.
>> >
>>
>> In any case, this is needed. I also could not find a way to read the extended
>> descriptor back.
>
>Thanks for the feedback.
>
>Besides the users I have in mind, do you have users for which you need
>the ability for user-space to access zone descriptor extensions data?
>Is this a need to have or nice to have feature from your point of view?

At this moment most of the users we have in mind are user-space
applications that are zone-aware, so I would way this is necessary.

This said, I understand if you prioritize pushing the code that enables
in-kernel users and then re-iterate on this.

Thanks,
Javier



More information about the Linux-nvme mailing list