[PATCH 5/6] mpt3sas: Introduce function to clone mpi request.
Tomas Henzl
thenzl at redhat.com
Mon Jan 22 06:38:15 PST 2018
On 01/19/2018 01:37 PM, Suganath Prabu S wrote:
> 1) Added function _base_clone_mpi_to_sys_mem to clone
> MPI request into system BAR0 mapped region.
>
> 2) Seperate out MPI Endpoint IO submissions to function
> _base_put_smid_mpi_ep_scsi_io.
>
> 3) MPI EP requests are submitted in two 32 bit MMIO writes.
> from _base_mpi_ep_writeq.
>
> Signed-off-by: Suganath Prabu S <suganath-prabu.subramani at broadcom.com>
> ---
> drivers/scsi/mpt3sas/mpt3sas_base.c | 131 +++++++++++++++++++++++++++++++++---
> 1 file changed, 123 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
> index 40a1806..0248058 100644
> --- a/drivers/scsi/mpt3sas/mpt3sas_base.c
> +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
> @@ -126,6 +126,24 @@ module_param_call(mpt3sas_fwfault_debug, _scsih_set_fwfault_debug,
> param_get_int, &mpt3sas_fwfault_debug, 0644);
>
> /**
> + * _base_clone_mpi_to_sys_mem - Writes/copies MPI frames
> + * to system/BAR0 region.
> + *
> + * @dst_iomem: Pointer to the destinaltion location in BAR0 space.
> + * @src: Pointer to the Source data.
> + * @size: Size of data to be copied.
> + */
> +static void
> +_base_clone_mpi_to_sys_mem(void *dst_iomem, void *src, u32 size)
> +{
> + int i;
> + __le32 *src_virt_mem = (__le32 *)src;
> +
> + for (i = 0; i < size/4; i++)
> + writel(cpu_to_le32(src_virt_mem[i]), dst_iomem + (i * 4));
> +}
> +
> +/**
> * _base_clone_to_sys_mem - Writes/copies data to system/BAR0 region
> *
> * @dst_iomem: Pointer to the destinaltion location in BAR0 space.
> @@ -3265,6 +3283,29 @@ mpt3sas_base_free_smid(struct MPT3SAS_ADAPTER *ioc, u16 smid)
> }
>
> /**
> + * _base_mpi_ep_writeq - 32 bit write to MMIO
> + * @b: data payload
> + * @addr: address in MMIO space
> + * @writeq_lock: spin lock
> + *
> + * This special handling for MPI EP to take care of 32 bit
> + * environment where its not quarenteed to send the entire word
> + * in one transfer.
Hi Suganath,
so is a single writeq possible ? There already is a _base_writeq function
which seems to be identical to _base_mpi_ep_writeq.
Also you may want to add a mmiowb() call.
tomash
> + */
> +static inline void
> +_base_mpi_ep_writeq(__u64 b, volatile void __iomem *addr,
> + spinlock_t *writeq_lock)
> +{
> + unsigned long flags;
> + __u64 data_out = cpu_to_le64(b);
> +
> + spin_lock_irqsave(writeq_lock, flags);
> + writel((u32)(data_out), addr);
> + writel((u32)(data_out >> 32), (addr + 4));
> + spin_unlock_irqrestore(writeq_lock, flags);
> +}
> +
> +/**
> * _base_writeq - 64 bit write to MMIO
> * @ioc: per adapter object
> * @b: data payload
> @@ -3296,6 +3337,36 @@ _base_writeq(__u64 b, volatile void __iomem *addr, spinlock_t *writeq_lock)
> #endif
>
> /**
> + * _base_put_smid_mpi_ep_scsi_io - send SCSI_IO request to firmware
> + * @ioc: per adapter object
> + * @smid: system request message index
> + * @handle: device handle
> + *
> + * Return nothing.
> + */
> +static void
> +_base_put_smid_mpi_ep_scsi_io(struct MPT3SAS_ADAPTER *ioc, u16 smid, u16 handle)
> +{
> + Mpi2RequestDescriptorUnion_t descriptor;
> + u64 *request = (u64 *)&descriptor;
> + void *mpi_req_iomem;
> + __le32 *mfp = (__le32 *)mpt3sas_base_get_msg_frame(ioc, smid);
> +
> + _clone_sg_entries(ioc, (void *) mfp, smid);
> + mpi_req_iomem = (void *)ioc->chip +
> + MPI_FRAME_START_OFFSET + (smid * ioc->request_sz);
> + _base_clone_mpi_to_sys_mem(mpi_req_iomem, (void *)mfp,
> + ioc->request_sz);
> + descriptor.SCSIIO.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO;
> + descriptor.SCSIIO.MSIxIndex = _base_get_msix_index(ioc);
> + descriptor.SCSIIO.SMID = cpu_to_le16(smid);
> + descriptor.SCSIIO.DevHandle = cpu_to_le16(handle);
> + descriptor.SCSIIO.LMID = 0;
> + _base_mpi_ep_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
> + &ioc->scsi_lookup_lock);
> +}
> +
> +/**
> * _base_put_smid_scsi_io - send SCSI_IO request to firmware
> * @ioc: per adapter object
> * @smid: system request message index
> @@ -3356,7 +3427,23 @@ _base_put_smid_hi_priority(struct MPT3SAS_ADAPTER *ioc, u16 smid,
> u16 msix_task)
> {
> Mpi2RequestDescriptorUnion_t descriptor;
> - u64 *request = (u64 *)&descriptor;
> + void *mpi_req_iomem;
> + u64 *request;
> +
> + if (ioc->is_mcpu_endpoint) {
> + MPI2RequestHeader_t *request_hdr;
> +
> + __le32 *mfp = (__le32 *)mpt3sas_base_get_msg_frame(ioc, smid);
> +
> + request_hdr = (MPI2RequestHeader_t *)mfp;
> + /* TBD 256 is offset within sys register. */
> + mpi_req_iomem = (void *)ioc->chip + MPI_FRAME_START_OFFSET
> + + (smid * ioc->request_sz);
> + _base_clone_mpi_to_sys_mem(mpi_req_iomem, (void *)mfp,
> + ioc->request_sz);
> + }
> +
> + request = (u64 *)&descriptor;
>
> descriptor.HighPriority.RequestFlags =
> MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY;
> @@ -3364,8 +3451,13 @@ _base_put_smid_hi_priority(struct MPT3SAS_ADAPTER *ioc, u16 smid,
> descriptor.HighPriority.SMID = cpu_to_le16(smid);
> descriptor.HighPriority.LMID = 0;
> descriptor.HighPriority.Reserved1 = 0;
> - _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
> - &ioc->scsi_lookup_lock);
> + if (ioc->is_mcpu_endpoint)
> + _base_mpi_ep_writeq(*request,
> + &ioc->chip->RequestDescriptorPostLow,
> + &ioc->scsi_lookup_lock);
> + else
> + _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
> + &ioc->scsi_lookup_lock);
> }
>
> /**
> @@ -3403,15 +3495,35 @@ static void
> _base_put_smid_default(struct MPT3SAS_ADAPTER *ioc, u16 smid)
> {
> Mpi2RequestDescriptorUnion_t descriptor;
> - u64 *request = (u64 *)&descriptor;
> + void *mpi_req_iomem;
> + u64 *request;
> + MPI2RequestHeader_t *request_hdr;
>
> + if (ioc->is_mcpu_endpoint) {
> + __le32 *mfp = (__le32 *)mpt3sas_base_get_msg_frame(ioc, smid);
> +
> + request_hdr = (MPI2RequestHeader_t *)mfp;
> +
> + _clone_sg_entries(ioc, (void *) mfp, smid);
> + /* TBD 256 is offset within sys register */
> + mpi_req_iomem = (void *)ioc->chip +
> + MPI_FRAME_START_OFFSET + (smid * ioc->request_sz);
> + _base_clone_mpi_to_sys_mem(mpi_req_iomem, (void *)mfp,
> + ioc->request_sz);
> + }
> + request = (u64 *)&descriptor;
> descriptor.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
> descriptor.Default.MSIxIndex = _base_get_msix_index(ioc);
> descriptor.Default.SMID = cpu_to_le16(smid);
> descriptor.Default.LMID = 0;
> descriptor.Default.DescriptorTypeDependent = 0;
> - _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
> - &ioc->scsi_lookup_lock);
> + if (ioc->is_mcpu_endpoint)
> + _base_mpi_ep_writeq(*request,
> + &ioc->chip->RequestDescriptorPostLow,
> + &ioc->scsi_lookup_lock);
> + else
> + _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
> + &ioc->scsi_lookup_lock);
> }
>
> /**
> @@ -3505,7 +3617,7 @@ _base_put_smid_nvme_encap_atomic(struct MPT3SAS_ADAPTER *ioc, u16 smid)
>
> /**
> * _base_put_smid_default - Default, primarily used for config pages
> - * use Atomic Request Descriptor
> + * use Atomic Request Descriptor
> * @ioc: per adapter object
> * @smid: system request message index
> *
> @@ -6330,7 +6442,10 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc)
> ioc->put_smid_nvme_encap = &_base_put_smid_nvme_encap_atomic;
> } else {
> ioc->put_smid_default = &_base_put_smid_default;
> - ioc->put_smid_scsi_io = &_base_put_smid_scsi_io;
> + if (ioc->is_mcpu_endpoint)
> + ioc->put_smid_scsi_io = &_base_put_smid_mpi_ep_scsi_io;
> + else
> + ioc->put_smid_scsi_io = &_base_put_smid_scsi_io;
> ioc->put_smid_fast_path = &_base_put_smid_fast_path;
> ioc->put_smid_hi_priority = &_base_put_smid_hi_priority;
> ioc->put_smid_nvme_encap = &_base_put_smid_nvme_encap;
More information about the Linux-nvme
mailing list