[PATCH 5/6] mpt3sas: Introduce function to clone mpi request.
Suganath Prabu S
suganath-prabu.subramani at broadcom.com
Fri Jan 19 04:37:41 PST 2018
1) Added function _base_clone_mpi_to_sys_mem to clone
MPI request into system BAR0 mapped region.
2) Seperate out MPI Endpoint IO submissions to function
_base_put_smid_mpi_ep_scsi_io.
3) MPI EP requests are submitted in two 32 bit MMIO writes.
from _base_mpi_ep_writeq.
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani at broadcom.com>
---
drivers/scsi/mpt3sas/mpt3sas_base.c | 131 +++++++++++++++++++++++++++++++++---
1 file changed, 123 insertions(+), 8 deletions(-)
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index 40a1806..0248058 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -126,6 +126,24 @@ module_param_call(mpt3sas_fwfault_debug, _scsih_set_fwfault_debug,
param_get_int, &mpt3sas_fwfault_debug, 0644);
/**
+ * _base_clone_mpi_to_sys_mem - Writes/copies MPI frames
+ * to system/BAR0 region.
+ *
+ * @dst_iomem: Pointer to the destinaltion location in BAR0 space.
+ * @src: Pointer to the Source data.
+ * @size: Size of data to be copied.
+ */
+static void
+_base_clone_mpi_to_sys_mem(void *dst_iomem, void *src, u32 size)
+{
+ int i;
+ __le32 *src_virt_mem = (__le32 *)src;
+
+ for (i = 0; i < size/4; i++)
+ writel(cpu_to_le32(src_virt_mem[i]), dst_iomem + (i * 4));
+}
+
+/**
* _base_clone_to_sys_mem - Writes/copies data to system/BAR0 region
*
* @dst_iomem: Pointer to the destinaltion location in BAR0 space.
@@ -3265,6 +3283,29 @@ mpt3sas_base_free_smid(struct MPT3SAS_ADAPTER *ioc, u16 smid)
}
/**
+ * _base_mpi_ep_writeq - 32 bit write to MMIO
+ * @b: data payload
+ * @addr: address in MMIO space
+ * @writeq_lock: spin lock
+ *
+ * This special handling for MPI EP to take care of 32 bit
+ * environment where its not quarenteed to send the entire word
+ * in one transfer.
+ */
+static inline void
+_base_mpi_ep_writeq(__u64 b, volatile void __iomem *addr,
+ spinlock_t *writeq_lock)
+{
+ unsigned long flags;
+ __u64 data_out = cpu_to_le64(b);
+
+ spin_lock_irqsave(writeq_lock, flags);
+ writel((u32)(data_out), addr);
+ writel((u32)(data_out >> 32), (addr + 4));
+ spin_unlock_irqrestore(writeq_lock, flags);
+}
+
+/**
* _base_writeq - 64 bit write to MMIO
* @ioc: per adapter object
* @b: data payload
@@ -3296,6 +3337,36 @@ _base_writeq(__u64 b, volatile void __iomem *addr, spinlock_t *writeq_lock)
#endif
/**
+ * _base_put_smid_mpi_ep_scsi_io - send SCSI_IO request to firmware
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @handle: device handle
+ *
+ * Return nothing.
+ */
+static void
+_base_put_smid_mpi_ep_scsi_io(struct MPT3SAS_ADAPTER *ioc, u16 smid, u16 handle)
+{
+ Mpi2RequestDescriptorUnion_t descriptor;
+ u64 *request = (u64 *)&descriptor;
+ void *mpi_req_iomem;
+ __le32 *mfp = (__le32 *)mpt3sas_base_get_msg_frame(ioc, smid);
+
+ _clone_sg_entries(ioc, (void *) mfp, smid);
+ mpi_req_iomem = (void *)ioc->chip +
+ MPI_FRAME_START_OFFSET + (smid * ioc->request_sz);
+ _base_clone_mpi_to_sys_mem(mpi_req_iomem, (void *)mfp,
+ ioc->request_sz);
+ descriptor.SCSIIO.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO;
+ descriptor.SCSIIO.MSIxIndex = _base_get_msix_index(ioc);
+ descriptor.SCSIIO.SMID = cpu_to_le16(smid);
+ descriptor.SCSIIO.DevHandle = cpu_to_le16(handle);
+ descriptor.SCSIIO.LMID = 0;
+ _base_mpi_ep_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
+ &ioc->scsi_lookup_lock);
+}
+
+/**
* _base_put_smid_scsi_io - send SCSI_IO request to firmware
* @ioc: per adapter object
* @smid: system request message index
@@ -3356,7 +3427,23 @@ _base_put_smid_hi_priority(struct MPT3SAS_ADAPTER *ioc, u16 smid,
u16 msix_task)
{
Mpi2RequestDescriptorUnion_t descriptor;
- u64 *request = (u64 *)&descriptor;
+ void *mpi_req_iomem;
+ u64 *request;
+
+ if (ioc->is_mcpu_endpoint) {
+ MPI2RequestHeader_t *request_hdr;
+
+ __le32 *mfp = (__le32 *)mpt3sas_base_get_msg_frame(ioc, smid);
+
+ request_hdr = (MPI2RequestHeader_t *)mfp;
+ /* TBD 256 is offset within sys register. */
+ mpi_req_iomem = (void *)ioc->chip + MPI_FRAME_START_OFFSET
+ + (smid * ioc->request_sz);
+ _base_clone_mpi_to_sys_mem(mpi_req_iomem, (void *)mfp,
+ ioc->request_sz);
+ }
+
+ request = (u64 *)&descriptor;
descriptor.HighPriority.RequestFlags =
MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY;
@@ -3364,8 +3451,13 @@ _base_put_smid_hi_priority(struct MPT3SAS_ADAPTER *ioc, u16 smid,
descriptor.HighPriority.SMID = cpu_to_le16(smid);
descriptor.HighPriority.LMID = 0;
descriptor.HighPriority.Reserved1 = 0;
- _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
- &ioc->scsi_lookup_lock);
+ if (ioc->is_mcpu_endpoint)
+ _base_mpi_ep_writeq(*request,
+ &ioc->chip->RequestDescriptorPostLow,
+ &ioc->scsi_lookup_lock);
+ else
+ _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
+ &ioc->scsi_lookup_lock);
}
/**
@@ -3403,15 +3495,35 @@ static void
_base_put_smid_default(struct MPT3SAS_ADAPTER *ioc, u16 smid)
{
Mpi2RequestDescriptorUnion_t descriptor;
- u64 *request = (u64 *)&descriptor;
+ void *mpi_req_iomem;
+ u64 *request;
+ MPI2RequestHeader_t *request_hdr;
+ if (ioc->is_mcpu_endpoint) {
+ __le32 *mfp = (__le32 *)mpt3sas_base_get_msg_frame(ioc, smid);
+
+ request_hdr = (MPI2RequestHeader_t *)mfp;
+
+ _clone_sg_entries(ioc, (void *) mfp, smid);
+ /* TBD 256 is offset within sys register */
+ mpi_req_iomem = (void *)ioc->chip +
+ MPI_FRAME_START_OFFSET + (smid * ioc->request_sz);
+ _base_clone_mpi_to_sys_mem(mpi_req_iomem, (void *)mfp,
+ ioc->request_sz);
+ }
+ request = (u64 *)&descriptor;
descriptor.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
descriptor.Default.MSIxIndex = _base_get_msix_index(ioc);
descriptor.Default.SMID = cpu_to_le16(smid);
descriptor.Default.LMID = 0;
descriptor.Default.DescriptorTypeDependent = 0;
- _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
- &ioc->scsi_lookup_lock);
+ if (ioc->is_mcpu_endpoint)
+ _base_mpi_ep_writeq(*request,
+ &ioc->chip->RequestDescriptorPostLow,
+ &ioc->scsi_lookup_lock);
+ else
+ _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
+ &ioc->scsi_lookup_lock);
}
/**
@@ -3505,7 +3617,7 @@ _base_put_smid_nvme_encap_atomic(struct MPT3SAS_ADAPTER *ioc, u16 smid)
/**
* _base_put_smid_default - Default, primarily used for config pages
- * use Atomic Request Descriptor
+ * use Atomic Request Descriptor
* @ioc: per adapter object
* @smid: system request message index
*
@@ -6330,7 +6442,10 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc)
ioc->put_smid_nvme_encap = &_base_put_smid_nvme_encap_atomic;
} else {
ioc->put_smid_default = &_base_put_smid_default;
- ioc->put_smid_scsi_io = &_base_put_smid_scsi_io;
+ if (ioc->is_mcpu_endpoint)
+ ioc->put_smid_scsi_io = &_base_put_smid_mpi_ep_scsi_io;
+ else
+ ioc->put_smid_scsi_io = &_base_put_smid_scsi_io;
ioc->put_smid_fast_path = &_base_put_smid_fast_path;
ioc->put_smid_hi_priority = &_base_put_smid_hi_priority;
ioc->put_smid_nvme_encap = &_base_put_smid_nvme_encap;
--
2.5.5
More information about the Linux-nvme
mailing list