[PATCH 2/5] nvme/multipath: Consult blk_status_t for failover
Keith Busch
keith.busch at intel.com
Thu Jan 4 14:46:20 PST 2018
This removes nvme multipath's specific status decoding to see if failover
is needed, using the generic blk_status_t that was translated earlier. This
abstraction from the raw NVMe status means nvme status decoding exists
in just one place.
Signed-off-by: Keith Busch <keith.busch at intel.com>
---
drivers/nvme/host/core.c | 9 +++++----
drivers/nvme/host/multipath.c | 44 ++++++++-----------------------------------
drivers/nvme/host/nvme.h | 4 ++--
3 files changed, 15 insertions(+), 42 deletions(-)
diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index f1cf1f6c5b28..4afc681f7089 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -196,8 +196,10 @@ static inline bool nvme_req_needs_retry(struct request *req)
void nvme_complete_rq(struct request *req)
{
- if (unlikely(nvme_req(req)->status && nvme_req_needs_retry(req))) {
- if (nvme_req_needs_failover(req)) {
+ blk_status_t status = nvme_error_status(req);
+
+ if (unlikely(status != BLK_STS_OK && nvme_req_needs_retry(req))) {
+ if (nvme_req_needs_failover(req, status)) {
nvme_failover_req(req);
return;
}
@@ -208,8 +210,7 @@ void nvme_complete_rq(struct request *req)
return;
}
}
-
- blk_mq_end_request(req, nvme_error_status(req));
+ blk_mq_end_request(req, status);
}
EXPORT_SYMBOL_GPL(nvme_complete_rq);
diff --git a/drivers/nvme/host/multipath.c b/drivers/nvme/host/multipath.c
index 1218a9fca846..ae9abb600c0f 100644
--- a/drivers/nvme/host/multipath.c
+++ b/drivers/nvme/host/multipath.c
@@ -33,46 +33,18 @@ void nvme_failover_req(struct request *req)
kblockd_schedule_work(&ns->head->requeue_work);
}
-bool nvme_req_needs_failover(struct request *req)
+bool nvme_req_needs_failover(struct request *req, blk_status_t error)
{
if (!(req->cmd_flags & REQ_NVME_MPATH))
return false;
- switch (nvme_req(req)->status & 0x7ff) {
- /*
- * Generic command status:
- */
- case NVME_SC_INVALID_OPCODE:
- case NVME_SC_INVALID_FIELD:
- case NVME_SC_INVALID_NS:
- case NVME_SC_LBA_RANGE:
- case NVME_SC_CAP_EXCEEDED:
- case NVME_SC_RESERVATION_CONFLICT:
- return false;
-
- /*
- * I/O command set specific error. Unfortunately these values are
- * reused for fabrics commands, but those should never get here.
- */
- case NVME_SC_BAD_ATTRIBUTES:
- case NVME_SC_INVALID_PI:
- case NVME_SC_READ_ONLY:
- case NVME_SC_ONCS_NOT_SUPPORTED:
- WARN_ON_ONCE(nvme_req(req)->cmd->common.opcode ==
- nvme_fabrics_command);
- return false;
-
- /*
- * Media and Data Integrity Errors:
- */
- case NVME_SC_WRITE_FAULT:
- case NVME_SC_READ_ERROR:
- case NVME_SC_GUARD_CHECK:
- case NVME_SC_APPTAG_CHECK:
- case NVME_SC_REFTAG_CHECK:
- case NVME_SC_COMPARE_FAILED:
- case NVME_SC_ACCESS_DENIED:
- case NVME_SC_UNWRITTEN_BLOCK:
+ switch (error) {
+ case BLK_STS_NOTSUPP:
+ case BLK_STS_NOSPC:
+ case BLK_STS_TARGET:
+ case BLK_STS_NEXUS:
+ case BLK_STS_MEDIUM:
+ case BLK_STS_PROTECTION:
return false;
}
diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h
index ea1aa5283e8e..cf8548c1d7ec 100644
--- a/drivers/nvme/host/nvme.h
+++ b/drivers/nvme/host/nvme.h
@@ -401,7 +401,7 @@ extern const struct block_device_operations nvme_ns_head_ops;
#ifdef CONFIG_NVME_MULTIPATH
void nvme_failover_req(struct request *req);
-bool nvme_req_needs_failover(struct request *req);
+bool nvme_req_needs_failover(struct request *req, blk_status_t error);
void nvme_kick_requeue_lists(struct nvme_ctrl *ctrl);
int nvme_mpath_alloc_disk(struct nvme_ctrl *ctrl,struct nvme_ns_head *head);
void nvme_mpath_add_disk(struct nvme_ns_head *head);
@@ -421,7 +421,7 @@ struct nvme_ns *nvme_find_path(struct nvme_ns_head *head);
static inline void nvme_failover_req(struct request *req)
{
}
-static inline bool nvme_req_needs_failover(struct request *req)
+static inline bool nvme_req_needs_failover(struct request *req, blk_status_t error)
{
return false;
}
--
2.13.6
More information about the Linux-nvme
mailing list