[PATCH 1/3] nvme-pci: add nvme_pci_pre_init
Jianchao Wang
jianchao.w.wang at oracle.com
Tue Jan 2 15:56:08 PST 2018
No fucntional change. Add nvme_pci_pre_init to package the nvme
specified initialization work before configuring admin queue.
Then nvme_pci_enable and nvme_pci_configure_admin_queue could be
clearer.
Signed-off-by: Jianchao Wang <jianchao.w.wang at oracle.com>
---
drivers/nvme/host/pci.c | 145 +++++++++++++++++++++++++-----------------------
1 file changed, 77 insertions(+), 68 deletions(-)
diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index 6e58de1..365dd05 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -1581,21 +1581,7 @@ static int nvme_pci_configure_admin_queue(struct nvme_dev *dev)
int result;
u32 aqa;
struct nvme_queue *nvmeq;
-
- result = nvme_remap_bar(dev, db_bar_size(dev, 0));
- if (result < 0)
- return result;
-
- dev->subsystem = readl(dev->bar + NVME_REG_VS) >= NVME_VS(1, 1, 0) ?
- NVME_CAP_NSSRC(dev->ctrl.cap) : 0;
-
- if (dev->subsystem &&
- (readl(dev->bar + NVME_REG_CSTS) & NVME_CSTS_NSSRO))
- writel(NVME_CSTS_NSSRO, dev->bar + NVME_REG_CSTS);
-
- result = nvme_disable_ctrl(&dev->ctrl, dev->ctrl.cap);
- if (result < 0)
- return result;
+ struct pci_dev *pdev = to_pci_dev(dev->dev);
nvmeq = dev->queues[0];
if (!nvmeq) {
@@ -1616,13 +1602,20 @@ static int nvme_pci_configure_admin_queue(struct nvme_dev *dev)
if (result)
return result;
+ /*
+ * Some devices and/or platforms don't advertise or work with INTx
+ * interrupts. Pre-enable a single MSIX or MSI vec for setup. We'll
+ * adjust this later.
+ */
+ result = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES);
+ if (result < 0)
+ return result;
+
nvmeq->cq_vector = 0;
nvme_init_queue(nvmeq, 0);
result = queue_request_irq(nvmeq);
- if (result) {
+ if (result)
nvmeq->cq_vector = -1;
- return result;
- }
return result;
}
@@ -2096,56 +2089,6 @@ static int nvme_pci_enable(struct nvme_dev *dev)
goto disable;
}
- /*
- * Some devices and/or platforms don't advertise or work with INTx
- * interrupts. Pre-enable a single MSIX or MSI vec for setup. We'll
- * adjust this later.
- */
- result = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES);
- if (result < 0)
- return result;
-
- dev->ctrl.cap = lo_hi_readq(dev->bar + NVME_REG_CAP);
-
- dev->q_depth = min_t(int, NVME_CAP_MQES(dev->ctrl.cap) + 1,
- io_queue_depth);
- dev->db_stride = 1 << NVME_CAP_STRIDE(dev->ctrl.cap);
- dev->dbs = dev->bar + 4096;
-
- /*
- * Temporary fix for the Apple controller found in the MacBook8,1 and
- * some MacBook7,1 to avoid controller resets and data loss.
- */
- if (pdev->vendor == PCI_VENDOR_ID_APPLE && pdev->device == 0x2001) {
- dev->q_depth = 2;
- dev_warn(dev->ctrl.device, "detected Apple NVMe controller, "
- "set queue depth=%u to work around controller resets\n",
- dev->q_depth);
- } else if (pdev->vendor == PCI_VENDOR_ID_SAMSUNG &&
- (pdev->device == 0xa821 || pdev->device == 0xa822) &&
- NVME_CAP_MQES(dev->ctrl.cap) == 0) {
- dev->q_depth = 64;
- dev_err(dev->ctrl.device, "detected PM1725 NVMe controller, "
- "set queue depth=%u\n", dev->q_depth);
- }
-
- /*
- * CMBs can currently only exist on >=1.2 PCIe devices. We only
- * populate sysfs if a CMB is implemented. Since nvme_dev_attrs_group
- * has no name we can pass NULL as final argument to
- * sysfs_add_file_to_group.
- */
-
- if (readl(dev->bar + NVME_REG_VS) >= NVME_VS(1, 2, 0)) {
- dev->cmb = nvme_map_cmb(dev);
- if (dev->cmb) {
- if (sysfs_add_file_to_group(&dev->ctrl.device->kobj,
- &dev_attr_cmb.attr, NULL))
- dev_warn(dev->ctrl.device,
- "failed to add sysfs attribute for CMB\n");
- }
- }
-
pci_enable_pcie_error_reporting(pdev);
pci_save_state(pdev);
return 0;
@@ -2290,6 +2233,68 @@ static void nvme_remove_dead_ctrl(struct nvme_dev *dev, int status)
nvme_put_ctrl(&dev->ctrl);
}
+/* Include the initialization work before setup admin queue
+ */
+static int nvme_pci_pre_init(struct nvme_dev *dev)
+{
+ int ret;
+ struct pci_dev *pdev = to_pci_dev(dev->dev);
+
+ dev->ctrl.cap = lo_hi_readq(dev->bar + NVME_REG_CAP);
+
+ dev->q_depth = min_t(int, NVME_CAP_MQES(dev->ctrl.cap) + 1,
+ io_queue_depth);
+ dev->db_stride = 1 << NVME_CAP_STRIDE(dev->ctrl.cap);
+ dev->dbs = dev->bar + 4096;
+
+ ret = nvme_remap_bar(dev, db_bar_size(dev, 0));
+ if (ret < 0)
+ return ret;
+
+ /*
+ * Temporary fix for the Apple controller found in the MacBook8,1 and
+ * some MacBook7,1 to avoid controller resets and data loss.
+ */
+ if (pdev->vendor == PCI_VENDOR_ID_APPLE && pdev->device == 0x2001) {
+ dev->q_depth = 2;
+ dev_warn(dev->ctrl.device, "detected Apple NVMe controller, "
+ "set queue depth=%u to work around controller resets\n",
+ dev->q_depth);
+ } else if (pdev->vendor == PCI_VENDOR_ID_SAMSUNG &&
+ (pdev->device == 0xa821 || pdev->device == 0xa822) &&
+ NVME_CAP_MQES(dev->ctrl.cap) == 0) {
+ dev->q_depth = 64;
+ dev_err(dev->ctrl.device, "detected PM1725 NVMe controller, "
+ "set queue depth=%u\n", dev->q_depth);
+ }
+
+ /*
+ * CMBs can currently only exist on >=1.2 PCIe devices. We only
+ * populate sysfs if a CMB is implemented. Since nvme_dev_attrs_group
+ * has no name we can pass NULL as final argument to
+ * sysfs_add_file_to_group.
+ */
+
+ if (readl(dev->bar + NVME_REG_VS) >= NVME_VS(1, 2, 0)) {
+ dev->cmb = nvme_map_cmb(dev);
+ if (dev->cmb) {
+ if (sysfs_add_file_to_group(&dev->ctrl.device->kobj,
+ &dev_attr_cmb.attr, NULL))
+ dev_warn(dev->ctrl.device,
+ "failed to add sysfs attribute for CMB\n");
+ }
+ }
+
+ dev->subsystem = readl(dev->bar + NVME_REG_VS) >= NVME_VS(1, 1, 0) ?
+ NVME_CAP_NSSRC(dev->ctrl.cap) : 0;
+
+ if (dev->subsystem &&
+ (readl(dev->bar + NVME_REG_CSTS) & NVME_CSTS_NSSRO))
+ writel(NVME_CSTS_NSSRO, dev->bar + NVME_REG_CSTS);
+
+ return nvme_disable_ctrl(&dev->ctrl, dev->ctrl.cap);
+}
+
static void nvme_reset_work(struct work_struct *work)
{
struct nvme_dev *dev =
@@ -2312,6 +2317,10 @@ static void nvme_reset_work(struct work_struct *work)
if (result)
goto out;
+ result = nvme_pci_pre_init(dev);
+ if (result)
+ goto out;
+
result = nvme_pci_configure_admin_queue(dev);
if (result)
goto out;
--
2.7.4
More information about the Linux-nvme
mailing list