[V1 4/6] mpt3sas: Introduce Base function for cloning.
Suganath Prabu S
suganath-prabu.subramani at broadcom.com
Wed Feb 7 02:51:48 PST 2018
All scsi IO's and config requests data buffer and
sgl are cloned to system memory in _clone_sg_entries
before submitting it to Firmware.
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani at broadcom.com>
---
drivers/scsi/mpt3sas/mpt3sas_base.c | 215 +++++++++++++++++++++++++++++++++-
drivers/scsi/mpt3sas/mpt3sas_base.h | 3 +
drivers/scsi/mpt3sas/mpt3sas_config.c | 1 +
3 files changed, 218 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index 36f1242..c41c65b 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -126,6 +126,24 @@ module_param_call(mpt3sas_fwfault_debug, _scsih_set_fwfault_debug,
param_get_int, &mpt3sas_fwfault_debug, 0644);
/**
+ * _base_clone_to_sys_mem - Writes/copies data to system/BAR0 region
+ *
+ * @dst_iomem: Pointer to the destinaltion location in BAR0 space.
+ * @src: Pointer to the Source data.
+ * @size: Size of data to be copied.
+ */
+static void
+_base_clone_to_sys_mem(void __iomem *dst_iomem, void *src, u32 size)
+{
+ int i;
+ u32 *src_virt_mem = (u32 *)(src);
+
+ for (i = 0; i < size/4; i++)
+ writel((u32)src_virt_mem[i],
+ (void __iomem *)dst_iomem + (i * 4));
+}
+
+/**
* _base_get_chain - Calculates and Returns virtual chain address
* for the provided smid in BAR0 space.
*
@@ -219,6 +237,201 @@ _base_get_buffer_phys_bar0(struct MPT3SAS_ADAPTER *ioc, u16 smid)
}
/**
+ * _base_get_chain_buffer_dma_to_chain_buffer - Iterates chain
+ * lookup list and Provides chain_buffer
+ * address for the matching dma address.
+ * (Each smid can have 64K starts from 17024)
+ *
+ * @ioc: per adapter object
+ * @chain_buffer_dma: Chain buffer dma address.
+ *
+ * @Returns - Pointer to chain buffer. Or Null on Failure.
+ */
+static void *
+_base_get_chain_buffer_dma_to_chain_buffer(struct MPT3SAS_ADAPTER *ioc,
+ dma_addr_t chain_buffer_dma)
+{
+ u16 index;
+
+ for (index = 0; index < ioc->chain_depth; index++) {
+ if (ioc->chain_lookup[index].chain_buffer_dma ==
+ chain_buffer_dma)
+ return ioc->chain_lookup[index].chain_buffer;
+ }
+ pr_info(MPT3SAS_FMT
+ "Provided chain_buffer_dma address is not in the lookup list\n",
+ ioc->name);
+ return NULL;
+}
+
+/**
+ * _clone_sg_entries - MPI EP's scsiio and config requests
+ * are handled here. Base function for
+ * double buffering, before submitting
+ * the requests.
+ *
+ * @ioc: per adapter object.
+ * @mpi_request: mf request pointer.
+ * @smid: system request message index.
+ *
+ * @Returns: Nothing.
+ */
+static void _clone_sg_entries(struct MPT3SAS_ADAPTER *ioc,
+ void *mpi_request, u16 smid)
+{
+ Mpi2SGESimple32_t *sgel, *sgel_next;
+ u32 sgl_flags, sge_chain_count = 0;
+ bool is_write = 0;
+ u16 i = 0;
+ void __iomem *buffer_iomem;
+ void *buffer_iomem_phys;
+ void __iomem *buff_ptr;
+ void *buff_ptr_phys;
+ void __iomem *dst_chain_addr[MCPU_MAX_CHAINS_PER_IO];
+ void *src_chain_addr[MCPU_MAX_CHAINS_PER_IO], *dst_addr_phys;
+ MPI2RequestHeader_t *request_hdr;
+ struct scsi_cmnd *scmd;
+ struct scatterlist *sg_scmd = NULL;
+ int is_scsiio_req = 0;
+
+ request_hdr = (MPI2RequestHeader_t *) mpi_request;
+
+ if (request_hdr->Function == MPI2_FUNCTION_SCSI_IO_REQUEST) {
+ Mpi25SCSIIORequest_t *scsiio_request =
+ (Mpi25SCSIIORequest_t *)mpi_request;
+ sgel = (Mpi2SGESimple32_t *) &scsiio_request->SGL;
+ is_scsiio_req = 1;
+ } else if (request_hdr->Function == MPI2_FUNCTION_CONFIG) {
+ Mpi2ConfigRequest_t *config_req =
+ (Mpi2ConfigRequest_t *)mpi_request;
+ sgel = (Mpi2SGESimple32_t *) &config_req->PageBufferSGE;
+ } else
+ return;
+
+ /* From smid we can get scsi_cmd, once we have sg_scmd,
+ * we just need to get sg_virt and sg_next to get virual
+ * address associated with sgel->Address.
+ */
+
+ if (is_scsiio_req) {
+ /* Get scsi_cmd using smid */
+ scmd = mpt3sas_scsih_scsi_lookup_get(ioc, smid);
+ if (scmd == NULL) {
+ pr_err(MPT3SAS_FMT "scmd is NULL\n", ioc->name);
+ return;
+ }
+
+ /* Get sg_scmd from scmd provided */
+ sg_scmd = scsi_sglist(scmd);
+ }
+
+ /*
+ * 0 - 255 System register
+ * 256 - 4352 MPI Frame. (This is based on maxCredit 32)
+ * 4352 - 4864 Reply_free pool (512 byte is reserved
+ * considering maxCredit 32. Reply need extra
+ * room, for mCPU case kept four times of
+ * maxCredit).
+ * 4864 - 17152 SGE chain element. (32cmd * 3 chain of
+ * 128 byte size = 12288)
+ * 17152 - x Host buffer mapped with smid.
+ * (Each smid can have 64K Max IO.)
+ * BAR0+Last 1K MSIX Addr and Data
+ * Total size in use 2113664 bytes of 4MB BAR0
+ */
+
+ buffer_iomem = _base_get_buffer_bar0(ioc, smid);
+ buffer_iomem_phys = _base_get_buffer_phys_bar0(ioc, smid);
+
+ buff_ptr = buffer_iomem;
+ buff_ptr_phys = buffer_iomem_phys;
+
+ if (sgel->FlagsLength &
+ (MPI2_SGE_FLAGS_HOST_TO_IOC << MPI2_SGE_FLAGS_SHIFT))
+ is_write = 1;
+
+ for (i = 0; i < MPT_MIN_PHYS_SEGMENTS + ioc->facts.MaxChainDepth; i++) {
+
+ sgl_flags = (sgel->FlagsLength >> MPI2_SGE_FLAGS_SHIFT);
+
+ switch (sgl_flags & MPI2_SGE_FLAGS_ELEMENT_MASK) {
+ case MPI2_SGE_FLAGS_CHAIN_ELEMENT:
+ /*
+ * Helper function which on passing
+ * chain_buffer_dma returns chain_buffer. Get
+ * the virtual address for sgel->Address
+ */
+ sgel_next =
+ _base_get_chain_buffer_dma_to_chain_buffer(ioc,
+ sgel->Address);
+ if (sgel_next == NULL)
+ return;
+ /*
+ * This is coping 128 byte chain
+ * frame (not a host buffer)
+ */
+ dst_chain_addr[sge_chain_count] =
+ _base_get_chain(ioc,
+ smid, sge_chain_count);
+ src_chain_addr[sge_chain_count] =
+ (void *) sgel_next;
+ dst_addr_phys =
+ _base_get_chain_phys(ioc,
+ smid, sge_chain_count);
+ sgel->Address = (dma_addr_t)dst_addr_phys;
+ sgel = sgel_next;
+ sge_chain_count++;
+ break;
+ case MPI2_SGE_FLAGS_SIMPLE_ELEMENT:
+ if (is_write) {
+ if (is_scsiio_req) {
+ _base_clone_to_sys_mem(buff_ptr,
+ sg_virt(sg_scmd),
+ (sgel->FlagsLength & 0x00ffffff));
+ sgel->Address =
+ (dma_addr_t)buff_ptr_phys;
+ } else {
+ _base_clone_to_sys_mem(buff_ptr,
+ ioc->config_vaddr,
+ (sgel->FlagsLength & 0x00ffffff));
+ sgel->Address =
+ (dma_addr_t)buff_ptr_phys;
+ }
+ }
+ buff_ptr += (sgel->FlagsLength & 0x00ffffff);
+ buff_ptr_phys += (sgel->FlagsLength & 0x00ffffff);
+ if ((sgel->FlagsLength &
+ (MPI2_SGE_FLAGS_END_OF_BUFFER
+ << MPI2_SGE_FLAGS_SHIFT)))
+ goto eob_clone_chain;
+ else {
+ /*
+ * Every single element in MPT will have
+ * associated sg_next. Better to sanity that
+ * sg_next is not NULL, but it will be a bug
+ * if it is null.
+ */
+ if (is_scsiio_req) {
+ sg_scmd = sg_next(sg_scmd);
+ if (sg_scmd)
+ sgel++;
+ else
+ goto eob_clone_chain;
+ }
+ }
+ break;
+ }
+ }
+
+eob_clone_chain:
+ for (i = 0; i < sge_chain_count; i++) {
+ if (is_scsiio_req)
+ _base_clone_to_sys_mem(dst_chain_addr[i],
+ src_chain_addr[i], ioc->request_sz);
+ }
+}
+
+/**
* mpt3sas_remove_dead_ioc_func - kthread context to remove dead ioc
* @arg: input argument, used to derive ioc
*
@@ -3295,7 +3508,7 @@ _base_put_smid_nvme_encap_atomic(struct MPT3SAS_ADAPTER *ioc, u16 smid)
/**
* _base_put_smid_default - Default, primarily used for config pages
- * use Atomic Request Descriptor
+ * use Atomic Request Descriptor
* @ioc: per adapter object
* @smid: system request message index
*
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h
index 2529d25..4fd582b 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.h
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.h
@@ -95,6 +95,8 @@
#define MPT_MIN_PHYS_SEGMENTS 16
#define MPT_KDUMP_MIN_PHYS_SEGMENTS 32
+#define MCPU_MAX_CHAINS_PER_IO 3
+
#ifdef CONFIG_SCSI_MPT3SAS_MAX_SGE
#define MPT3SAS_SG_DEPTH CONFIG_SCSI_MPT3SAS_MAX_SGE
#else
@@ -1238,6 +1240,7 @@ struct MPT3SAS_ADAPTER {
u16 config_page_sz;
void *config_page;
dma_addr_t config_page_dma;
+ void *config_vaddr;
/* scsiio request */
u16 hba_queue_depth;
diff --git a/drivers/scsi/mpt3sas/mpt3sas_config.c b/drivers/scsi/mpt3sas/mpt3sas_config.c
index 1c747cf..0dba3c4 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_config.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_config.c
@@ -219,6 +219,7 @@ _config_alloc_config_dma_memory(struct MPT3SAS_ADAPTER *ioc,
mem->page = ioc->config_page;
mem->page_dma = ioc->config_page_dma;
}
+ ioc->config_vaddr = mem->page;
return r;
}
--
2.5.5
More information about the Linux-nvme
mailing list