Host reconnecting need more than 60s to start after nvmetcli clear on target
Yi Zhang
yizhan at redhat.com
Fri Sep 8 04:44:37 PDT 2017
Hi
I found this issue on latest 4.13, is it for designed? I cannot reproduce it on 4.12.
Here is the log from host:
4.13
[ 637.246798] nvme nvme0: new ctrl: NQN "nqn.2014-08.org.nvmexpress.discovery", addr 172.31.0.90:4420
[ 637.436315] nvme nvme0: creating 40 I/O queues.
[ 637.939988] nvme nvme0: new ctrl: NQN "testnqn", addr 172.31.0.90:4420
[ 645.319803] nvme nvme0: rescanning
-->need more than 60 seconds to start reconnect
[ 706.073551] nvme nvme0: Reconnecting in 10 seconds...
[ 717.740550] nvme nvme0: Connect rejected: status 8 (invalid service ID).
[ 717.748061] nvme nvme0: rdma_resolve_addr wait failed (-104).
[ 717.754495] nvme nvme0: Failed reconnect attempt 1
[ 717.759853] nvme nvme0: Reconnecting in 10 seconds...
[ 728.530246] nvme nvme0: Connect rejected: status 8 (invalid service ID).
[ 728.537757] nvme nvme0: rdma_resolve_addr wait failed (-104).
4.12
[ 106.264737] nvme nvme0: new ctrl: NQN "nqn.2014-08.org.nvmexpress.discovery", addr 172.31.0.90:4420
[ 106.390110] nvme nvme0: creating 40 I/O queues.
[ 106.903876] nvme nvme0: new ctrl: NQN "testnqn", addr 172.31.0.90:4420
[ 116.865211] nvme nvme0: rescanning
[ 116.912470] nvme nvme0: Reconnecting in 10 seconds...
[ 127.129986] nvme nvme0: Connect rejected: status 8 (invalid service ID).
[ 127.137492] nvme nvme0: rdma_resolve_addr wait failed (-104).
[ 127.144116] nvme nvme0: Failed reconnect attempt 1
[ 127.149474] nvme nvme0: Reconnecting in 10 seconds...
[ 137.343403] nvme nvme0: Connect rejected: status 8 (invalid service ID).
[ 137.350904] nvme nvme0: rdma_resolve_addr wait failed (-104).
Best Regards,
Yi Zhang
More information about the Linux-nvme
mailing list