[PATCH 1/3] nvme: Enable autonomous power state transitions
Andy Lutomirski
luto at kernel.org
Tue Jan 17 17:54:18 PST 2017
NVMe devices can advertise multiple power states. These states can
be either "operational" (the device is fully functional but possibly
slow) or "non-operational" (the device is asleep until woken up).
Some devices can automatically enter a non-operational state when
idle for a specified amount of time and then automatically wake back
up when needed.
The hardware configuration is a table. For each state, an entry in
the table indicates the next deeper non-operational state, if any,
to autonomously transition to and the idle time required before
transitioning.
This patch teaches the driver to program APST so that each successive
non-operational state will be entered after an idle time equal to 100%
of the total latency (entry plus exit) associated with that state.
The maximum acceptable latency is controlled using dev_pm_qos
(e.g. power/pm_qos_latency_tolerance_us in sysfs); non-operational
states with total latency greater than this value will not be used.
As a special case, setting the latency tolerance to 0 will disable
APST entirely. On hardware without APST support, the sysfs file will
not be exposed.
The latency tolerance for newly-probed devices is set by the module
parameter nvme_core.default_ps_max_latency_us.
In theory, the device can expose "default" APST table, but this
doesn't seem to function correctly on my device (Samsung 950), nor
does it seem particularly useful. There is also an optional
mechanism by which a configuration can be "saved" so it will be
automatically loaded on reset. This can be configured from
userspace, but it doesn't seem useful to support in the driver.
On my laptop, enabling APST seems to save nearly 1W.
The hardware tables can be decoded in userspace with nvme-cli.
'nvme id-ctrl /dev/nvmeN' will show the power state table and
'nvme get-feature -f 0x0c -H /dev/nvme0' will show the current APST
configuration.
Signed-off-by: Andy Lutomirski <luto at kernel.org>
---
drivers/nvme/host/core.c | 140 +++++++++++++++++++++++++++++++++++++++++++++++
drivers/nvme/host/nvme.h | 7 +++
drivers/nvme/host/pci.c | 2 +
drivers/nvme/host/rdma.c | 2 +
include/linux/nvme.h | 6 ++
5 files changed, 157 insertions(+)
diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 8a3c3e32a704..f4e177f042ed 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -26,6 +26,7 @@
#include <linux/ptrace.h>
#include <linux/nvme_ioctl.h>
#include <linux/t10-pi.h>
+#include <linux/pm_qos.h>
#include <scsi/sg.h>
#include <asm/unaligned.h>
@@ -56,6 +57,11 @@ EXPORT_SYMBOL_GPL(nvme_max_retries);
static int nvme_char_major;
module_param(nvme_char_major, int, 0);
+static unsigned long default_ps_max_latency_us = 25000;
+module_param(default_ps_max_latency_us, ulong, 0644);
+MODULE_PARM_DESC(default_ps_max_latency_us,
+ "max power saving latency for new devices; use PM QOS to change per device");
+
static LIST_HEAD(nvme_ctrl_list);
static DEFINE_SPINLOCK(dev_list_lock);
@@ -1196,6 +1202,120 @@ static void nvme_set_queue_limits(struct nvme_ctrl *ctrl,
blk_queue_write_cache(q, vwc, vwc);
}
+void nvme_configure_apst(struct nvme_ctrl *ctrl)
+{
+ /*
+ * APST (Autonomous Power State Transition) lets us program a
+ * table of power state transitions that the controller will
+ * perform automatically. We configure it with a simple
+ * heuristic: we are willing to spend at most 2% of the time
+ * transitioning between power states. Therefore, when running
+ * in any given state, we will enter the next lower-power
+ * non-operational state after waiting 100 * (enlat + exlat)
+ * microseconds, as long as that state's total latency is under
+ * the requested maximum latency.
+ *
+ * We will not autonomously enter any non-operational state for
+ * which the total latency exceeds ps_max_latency_us. Users
+ * can set ps_max_latency_us to zero to turn off APST.
+ */
+
+ unsigned apste;
+ struct nvme_feat_auto_pst *table;
+ int ret;
+
+ /*
+ * If APST isn't supported or if we haven't been initialized yet,
+ * then don't do anything.
+ */
+ if (!ctrl->apsta)
+ return;
+
+ if (ctrl->npss > 31) {
+ dev_warn(ctrl->device, "NPSS is invalid; not using APST\n");
+ return;
+ }
+
+ table = kzalloc(sizeof(*table), GFP_KERNEL);
+ if (!table)
+ return;
+
+ if (ctrl->ps_max_latency_us == 0) {
+ /* Turn off APST. */
+ apste = 0;
+ } else {
+ __le64 target = cpu_to_le64(0);
+ int state;
+
+ /*
+ * Walk through all states from lowest- to highest-power.
+ * According to the spec, lower-numbered states use more
+ * power. NPSS, despite the name, is the index of the
+ * lowest-power state, not the number of states.
+ */
+ for (state = (int)ctrl->npss; state >= 0; state--) {
+ u64 total_latency_us, transition_ms;
+
+ if (target)
+ table->entries[state] = target;
+
+ /*
+ * Is this state a useful non-operational state for
+ * higher-power states to autonomously transition to?
+ */
+ if (!(ctrl->psd[state].flags &
+ NVME_PS_FLAGS_NON_OP_STATE))
+ continue;
+
+ total_latency_us =
+ (u64)le32_to_cpu(ctrl->psd[state].entry_lat) +
+ + le32_to_cpu(ctrl->psd[state].exit_lat);
+ if (total_latency_us > ctrl->ps_max_latency_us)
+ continue;
+
+ /*
+ * This state is good. Use it as the APST idle
+ * target for higher power states.
+ */
+ transition_ms = total_latency_us + 19;
+ do_div(transition_ms, 20);
+ if (transition_ms > (1 << 24) - 1)
+ transition_ms = (1 << 24) - 1;
+
+ target = cpu_to_le64((state << 3) |
+ (transition_ms << 8));
+ }
+
+ apste = 1;
+ }
+
+ ret = nvme_set_features(ctrl, NVME_FEAT_AUTO_PST, apste,
+ table, sizeof(*table), NULL);
+ if (ret)
+ dev_err(ctrl->device, "failed to set APST feature (%d)\n", ret);
+
+ kfree(table);
+}
+EXPORT_SYMBOL_GPL(nvme_configure_apst);
+
+static void nvme_set_latency_tolerance(struct device *dev, s32 val)
+{
+ struct nvme_ctrl *ctrl = dev_get_drvdata(dev);
+
+ u64 latency;
+
+ if (val == PM_QOS_LATENCY_TOLERANCE_NO_CONSTRAINT ||
+ val == PM_QOS_LATENCY_ANY)
+ latency = U64_MAX;
+ else
+ latency = val;
+
+ if (ctrl->ps_max_latency_us != val) {
+ ctrl->ps_max_latency_us = val;
+ nvme_configure_apst(ctrl);
+ }
+}
+
/*
* Initialize the cached copies of the Identify data and various controller
* register in our nvme_ctrl structure. This should be called as soon as
@@ -1207,6 +1327,7 @@ int nvme_init_identify(struct nvme_ctrl *ctrl)
u64 cap;
int ret, page_shift;
u32 max_hw_sectors;
+ u8 prev_apsta;
ret = ctrl->ops->reg_read32(ctrl, NVME_REG_VS, &ctrl->vs);
if (ret) {
@@ -1249,6 +1370,11 @@ int nvme_init_identify(struct nvme_ctrl *ctrl)
ctrl->sgls = le32_to_cpu(id->sgls);
ctrl->kas = le16_to_cpu(id->kas);
+ ctrl->npss = id->npss;
+ prev_apsta = ctrl->apsta;
+ ctrl->apsta = id->apsta;
+ memcpy(ctrl->psd, id->psd, sizeof(ctrl->psd));
+
if (ctrl->ops->is_fabrics) {
ctrl->icdoff = le16_to_cpu(id->icdoff);
ctrl->ioccsz = le32_to_cpu(id->ioccsz);
@@ -1272,6 +1398,12 @@ int nvme_init_identify(struct nvme_ctrl *ctrl)
}
kfree(id);
+
+ if (ctrl->apsta && !prev_apsta)
+ dev_pm_qos_expose_latency_tolerance(ctrl->device);
+ else if (!ctrl->apsta && prev_apsta)
+ dev_pm_qos_hide_latency_tolerance(ctrl->device);
+
return ret;
}
EXPORT_SYMBOL_GPL(nvme_init_identify);
@@ -2009,6 +2141,14 @@ int nvme_init_ctrl(struct nvme_ctrl *ctrl, struct device *dev,
list_add_tail(&ctrl->node, &nvme_ctrl_list);
spin_unlock(&dev_list_lock);
+ /*
+ * Initialize latency tolerance controls. The sysfs files won't
+ * be visible to userspace unless the device actually supports APST.
+ */
+ ctrl->device->power.set_latency_tolerance = nvme_set_latency_tolerance;
+ dev_pm_qos_update_user_latency_tolerance(ctrl->device,
+ min(default_ps_max_latency_us, (unsigned long)S32_MAX));
+
return 0;
out_release_instance:
nvme_release_instance(ctrl);
diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h
index aead6d08ed2c..38df1745ccc8 100644
--- a/drivers/nvme/host/nvme.h
+++ b/drivers/nvme/host/nvme.h
@@ -143,13 +143,19 @@ struct nvme_ctrl {
u32 vs;
u32 sgls;
u16 kas;
+ u8 npss;
+ u8 apsta;
unsigned int kato;
bool subsystem;
unsigned long quirks;
+ struct nvme_id_power_state psd[32];
struct work_struct scan_work;
struct work_struct async_event_work;
struct delayed_work ka_work;
+ /* Power saving configuration */
+ u64 ps_max_latency_us;
+
/* Fabrics only */
u16 sqsize;
u32 ioccsz;
@@ -263,6 +269,7 @@ int nvme_init_ctrl(struct nvme_ctrl *ctrl, struct device *dev,
void nvme_uninit_ctrl(struct nvme_ctrl *ctrl);
void nvme_put_ctrl(struct nvme_ctrl *ctrl);
int nvme_init_identify(struct nvme_ctrl *ctrl);
+void nvme_configure_apst(struct nvme_ctrl *ctrl);
void nvme_queue_scan(struct nvme_ctrl *ctrl);
void nvme_remove_namespaces(struct nvme_ctrl *ctrl);
diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index 7103bce4ba4f..1c3e170da6de 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -1791,6 +1791,8 @@ static void nvme_reset_work(struct work_struct *work)
if (result)
goto out;
+ nvme_configure_apst(&dev->ctrl);
+
/*
* A controller that can not execute IO typically requires user
* intervention to correct. For such degraded controllers, the driver
diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c
index 557f29b1f1bb..a64b5db96fd8 100644
--- a/drivers/nvme/host/rdma.c
+++ b/drivers/nvme/host/rdma.c
@@ -1629,6 +1629,8 @@ static int nvme_rdma_configure_admin_queue(struct nvme_rdma_ctrl *ctrl)
nvme_start_keep_alive(&ctrl->ctrl);
+ nvme_configure_apst(&ctrl->ctrl);
+
return 0;
out_cleanup_queue:
diff --git a/include/linux/nvme.h b/include/linux/nvme.h
index 3d1c6f1b15c9..f929e8cf0a16 100644
--- a/include/linux/nvme.h
+++ b/include/linux/nvme.h
@@ -576,6 +576,12 @@ struct nvme_write_zeroes_cmd {
__le16 appmask;
};
+/* Features */
+
+struct nvme_feat_auto_pst {
+ __le64 entries[32];
+};
+
/* Admin commands */
enum nvme_admin_opcode {
--
2.9.3
More information about the Linux-nvme
mailing list