[PATCH 03/17] lpfc: NVME Initiator: Base modifications Part B
James Smart
jsmart2021 at gmail.com
Tue Jan 17 17:20:46 PST 2017
NVME Initiator: Base modifications
This is part B of parts A..F.
Part B is limited to lpfc_attr.c: lpfc attribute modifications
*********
Refer to Part A for a description of base modifications
Signed-off-by: Dick Kennedy <dick.kennedy at broadcom.com>
Signed-off-by: James Smart <james.smart at broadcom.com>
---
drivers/scsi/lpfc/lpfc_attr.c | 448 ++++++++++++++++++++++++++++++++++++++----
1 file changed, 405 insertions(+), 43 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 50cf402..72949f5 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -35,14 +35,17 @@
#include <scsi/scsi_transport_fc.h>
#include <scsi/fc/fc_fs.h>
+#include <linux/nvme-fc-driver.h>
+
#include "lpfc_hw4.h"
#include "lpfc_hw.h"
#include "lpfc_sli.h"
#include "lpfc_sli4.h"
#include "lpfc_nl.h"
#include "lpfc_disc.h"
-#include "lpfc_scsi.h"
#include "lpfc.h"
+#include "lpfc_scsi.h"
+#include "lpfc_nvme.h"
#include "lpfc_logmsg.h"
#include "lpfc_version.h"
#include "lpfc_compat.h"
@@ -50,9 +53,9 @@
#include "lpfc_vport.h"
#include "lpfc_attr.h"
-#define LPFC_DEF_DEVLOSS_TMO 30
-#define LPFC_MIN_DEVLOSS_TMO 1
-#define LPFC_MAX_DEVLOSS_TMO 255
+#define LPFC_DEF_DEVLOSS_TMO 30
+#define LPFC_MIN_DEVLOSS_TMO 1
+#define LPFC_MAX_DEVLOSS_TMO 255
/*
* Write key size should be multiple of 4. If write key is changed
@@ -130,6 +133,124 @@ lpfc_enable_fip_show(struct device *dev, struct device_attribute *attr,
}
static ssize_t
+lpfc_nvme_info_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata;
+ struct lpfc_hba *phba = vport->phba;
+ struct nvme_fc_local_port *localport;
+ struct lpfc_nvme_lport *lport;
+ struct lpfc_nvme_rport *rport;
+ struct nvme_fc_remote_port *nrport;
+ char *statep;
+ int len = 0;
+
+ if (!(phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME)) {
+ len += snprintf(buf, PAGE_SIZE, "NVME Disabled\n");
+ return len;
+ }
+
+ localport = vport->localport;
+ if (!localport) {
+ len = snprintf(buf, PAGE_SIZE,
+ "NVME Initiator x%llx is not allocated\n",
+ wwn_to_u64(vport->fc_portname.u.wwn));
+ return len;
+ }
+ len = snprintf(buf, PAGE_SIZE, "NVME Initiator Enabled\n");
+
+ spin_lock_irq(shost->host_lock);
+ lport = (struct lpfc_nvme_lport *)localport->private;
+
+ /* Port state is only one of two values for now. */
+ if (localport->port_id)
+ statep = "ONLINE";
+ else
+ statep = "UNKNOWN ";
+
+ len += snprintf(buf + len, PAGE_SIZE - len,
+ "%s%d WWPN x%llx WWNN x%llx DID x%06x %s\n",
+ "NVME LPORT lpfc",
+ phba->brd_no,
+ wwn_to_u64(vport->fc_portname.u.wwn),
+ wwn_to_u64(vport->fc_nodename.u.wwn),
+ localport->port_id, statep);
+
+ list_for_each_entry(rport, &lport->rport_list, list) {
+ /* local short-hand pointer. */
+ nrport = rport->remoteport;
+
+ /* Port state is only one of two values for now. */
+ switch (nrport->port_state) {
+ case FC_OBJSTATE_ONLINE:
+ statep = "ONLINE";
+ break;
+ case FC_OBJSTATE_UNKNOWN:
+ statep = "UNKNOWN ";
+ break;
+ default:
+ statep = "UNSUPPORTED";
+ break;
+ }
+
+ /* Tab in to show lport ownership. */
+ len += snprintf(buf + len, PAGE_SIZE - len,
+ "NVME RPORT ");
+ if (phba->brd_no >= 10)
+ len += snprintf(buf + len, PAGE_SIZE - len, " ");
+
+ len += snprintf(buf + len, PAGE_SIZE - len, "WWPN x%llx ",
+ nrport->port_name);
+ len += snprintf(buf + len, PAGE_SIZE - len, "WWNN x%llx ",
+ nrport->node_name);
+ len += snprintf(buf + len, PAGE_SIZE - len, "DID x%06x ",
+ nrport->port_id);
+
+ switch (nrport->port_role) {
+ case FC_PORT_ROLE_NVME_INITIATOR:
+ len += snprintf(buf + len, PAGE_SIZE - len,
+ "INITIATOR ");
+ break;
+ case FC_PORT_ROLE_NVME_TARGET:
+ len += snprintf(buf + len, PAGE_SIZE - len,
+ "TARGET ");
+ break;
+ case FC_PORT_ROLE_NVME_DISCOVERY:
+ len += snprintf(buf + len, PAGE_SIZE - len,
+ "DISCOVERY ");
+ break;
+ default:
+ len += snprintf(buf + len, PAGE_SIZE - len,
+ "UNKNOWN_ROLE x%x",
+ nrport->port_role);
+ break;
+ }
+ len += snprintf(buf + len, PAGE_SIZE - len, "%s ", statep);
+ /* Terminate the string. */
+ len += snprintf(buf + len, PAGE_SIZE - len, "\n");
+ }
+ spin_unlock_irq(shost->host_lock);
+
+ len += snprintf(buf + len, PAGE_SIZE, "\nNVME Statistics\n");
+ len += snprintf(buf+len, PAGE_SIZE-len,
+ "LS: Xmt %016llx Cmpl %016llx\n",
+ phba->fc4NvmeLsRequests,
+ phba->fc4NvmeLsCmpls);
+
+ len += snprintf(buf+len, PAGE_SIZE-len,
+ "FCP: Rd %016llx Wr %016llx IO %016llx\n",
+ phba->fc4NvmeInputRequests,
+ phba->fc4NvmeOutputRequests,
+ phba->fc4NvmeControlRequests);
+
+ len += snprintf(buf+len, PAGE_SIZE-len,
+ " Cmpl %016llx\n", phba->fc4NvmeIoCmpls);
+
+ return len;
+}
+
+static ssize_t
lpfc_bg_info_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
@@ -675,6 +796,28 @@ lpfc_issue_lip(struct Scsi_Host *shost)
return 0;
}
+int
+lpfc_emptyq_wait(struct lpfc_hba *phba, struct list_head *q, spinlock_t *lock)
+{
+ int cnt = 0;
+
+ spin_lock_irq(lock);
+ while (!list_empty(q)) {
+ spin_unlock_irq(lock);
+ msleep(20);
+ if (cnt++ > 250) { /* 5 secs */
+ lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+ "0466 %s %s\n",
+ "Outstanding IO when ",
+ "bringing Adapter offline\n");
+ return 0;
+ }
+ spin_lock_irq(lock);
+ }
+ spin_unlock_irq(lock);
+ return 1;
+}
+
/**
* lpfc_do_offline - Issues a mailbox command to bring the link down
* @phba: lpfc_hba pointer.
@@ -694,10 +837,10 @@ static int
lpfc_do_offline(struct lpfc_hba *phba, uint32_t type)
{
struct completion online_compl;
+ struct lpfc_queue *qp = NULL;
struct lpfc_sli_ring *pring;
struct lpfc_sli *psli;
int status = 0;
- int cnt = 0;
int i;
int rc;
@@ -717,20 +860,24 @@ lpfc_do_offline(struct lpfc_hba *phba, uint32_t type)
/* Wait a little for things to settle down, but not
* long enough for dev loss timeout to expire.
*/
- for (i = 0; i < psli->num_rings; i++) {
- pring = &psli->ring[i];
- while (!list_empty(&pring->txcmplq)) {
- msleep(10);
- if (cnt++ > 500) { /* 5 secs */
- lpfc_printf_log(phba,
- KERN_WARNING, LOG_INIT,
- "0466 Outstanding IO when "
- "bringing Adapter offline\n");
- break;
- }
+ if (phba->sli_rev != LPFC_SLI_REV4) {
+ for (i = 0; i < psli->num_rings; i++) {
+ pring = &psli->sli3_ring[i];
+ if (!lpfc_emptyq_wait(phba, &pring->txcmplq,
+ &phba->hbalock))
+ goto out;
+ }
+ } else {
+ list_for_each_entry(qp, &phba->sli4_hba.lpfc_wq_list, wq_list) {
+ pring = qp->pring;
+ if (!pring)
+ continue;
+ if (!lpfc_emptyq_wait(phba, &pring->txcmplq,
+ &pring->ring_lock))
+ goto out;
}
}
-
+out:
init_completion(&online_compl);
rc = lpfc_workq_post_event(phba, &status, &online_compl, type);
if (rc == 0)
@@ -1741,7 +1888,7 @@ lpfc_##attr##_set(struct lpfc_hba *phba, uint val) \
if (lpfc_rangecheck(val, minval, maxval)) {\
lpfc_printf_log(phba, KERN_ERR, LOG_INIT, \
"3052 lpfc_" #attr " changed from %d to %d\n", \
- phba->cfg_##attr, val); \
+ phba->cfg_##attr, val); \
phba->cfg_##attr = val;\
return 0;\
}\
@@ -1945,6 +2092,7 @@ lpfc_##attr##_store(struct device *dev, struct device_attribute *attr, \
}
+static DEVICE_ATTR(nvme_info, 0444, lpfc_nvme_info_show, NULL);
static DEVICE_ATTR(bg_info, S_IRUGO, lpfc_bg_info_show, NULL);
static DEVICE_ATTR(bg_guard_err, S_IRUGO, lpfc_bg_guard_err_show, NULL);
static DEVICE_ATTR(bg_apptag_err, S_IRUGO, lpfc_bg_apptag_err_show, NULL);
@@ -2817,8 +2965,11 @@ lpfc_txq_hw_show(struct device *dev, struct device_attribute *attr, char *buf)
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_hba *phba = ((struct lpfc_vport *) shost->hostdata)->phba;
+ if (phba->sli_rev != LPFC_SLI_REV4)
+ return snprintf(buf, PAGE_SIZE, "%d\n",
+ phba->sli.sli3_ring[LPFC_ELS_RING].txq_max);
return snprintf(buf, PAGE_SIZE, "%d\n",
- phba->sli.ring[LPFC_ELS_RING].txq_max);
+ phba->sli4_hba.els_wq->pring->txq_max);
}
static DEVICE_ATTR(txq_hw, S_IRUGO,
@@ -2830,8 +2981,11 @@ lpfc_txcmplq_hw_show(struct device *dev, struct device_attribute *attr,
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_hba *phba = ((struct lpfc_vport *) shost->hostdata)->phba;
+ if (phba->sli_rev != LPFC_SLI_REV4)
+ return snprintf(buf, PAGE_SIZE, "%d\n",
+ phba->sli.sli3_ring[LPFC_ELS_RING].txcmplq_max);
return snprintf(buf, PAGE_SIZE, "%d\n",
- phba->sli.ring[LPFC_ELS_RING].txcmplq_max);
+ phba->sli4_hba.els_wq->pring->txcmplq_max);
}
static DEVICE_ATTR(txcmplq_hw, S_IRUGO,
@@ -3030,6 +3184,41 @@ static DEVICE_ATTR(lpfc_devloss_tmo, S_IRUGO | S_IWUSR,
lpfc_devloss_tmo_show, lpfc_devloss_tmo_store);
/*
+ * lpfc_suppress_rsp: Enable suppress rsp feature is firmware supports it
+ * lpfc_suppress_rsp = 0 Disable
+ * lpfc_suppress_rsp = 1 Enable (default)
+ *
+ */
+LPFC_ATTR_R(suppress_rsp, 1, 0, 1,
+ "Enable suppress rsp feature is firmware supports it");
+
+/*
+ * lpfc_enable_fc4_type: Defines what FC4 types are supported.
+ * Supported Values: 1 - register just FCP
+ * 2 - register just NVME
+ * 3 - register both FCP and NVME
+ * is [1,3]. Default value is 1
+ */
+LPFC_ATTR_R(enable_fc4_type, LPFC_ENABLE_FCP,
+ LPFC_ENABLE_FCP, LPFC_ENABLE_BOTH,
+ "Define fc4 type to register with fabric.");
+
+/*
+ * lpfc_xri_split: Defines the division of XRI resources between SCSI and NVME
+ * This parameter is only used if:
+ * lpfc_enable_fc4_type is 3 - register both FCP and NVME
+ *
+ * ELS/CT always get 10% of XRIs, up to a maximum of 250
+ * The remaining XRIs get split up based on lpfc_xri_split per port:
+ *
+ * Supported Values are in percentages
+ * the xri_split value is the percentage the SCSI port will get. The remaining
+ * percentage will go to NVME.
+ */
+LPFC_ATTR_R(xri_split, 50, 10, 90,
+ "Division of XRI resources between SCSI and NVME");
+
+/*
# lpfc_log_verbose: Only turn this flag on if you are willing to risk being
# deluged with LOTS of information.
# You can set a bit mask to record specific types of verbose messages:
@@ -3685,7 +3874,7 @@ lpfc_link_speed_store(struct device *dev, struct device_attribute *attr,
uint32_t prev_val, if_type;
if_type = bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf);
- if (if_type == LPFC_SLI_INTF_IF_TYPE_2 &&
+ if ((if_type == LPFC_SLI_INTF_IF_TYPE_2) &&
phba->hba_flag & HBA_FORCED_LINK_SPEED)
return -EPERM;
@@ -4143,13 +4332,14 @@ lpfc_fcp_imax_store(struct device *dev, struct device_attribute *attr,
/*
* Value range for the HBA is [5000,5000000]
* The value for each EQ depends on how many EQs are configured.
+ * Allow value == 0
*/
- if (val < LPFC_MIN_IMAX || val > LPFC_MAX_IMAX)
+ if (val && (val < LPFC_MIN_IMAX || val > LPFC_MAX_IMAX))
return -EINVAL;
phba->cfg_fcp_imax = (uint32_t)val;
- for (i = 0; i < phba->cfg_fcp_io_channel; i += LPFC_MAX_EQ_DELAY)
- lpfc_modify_fcp_eq_delay(phba, i);
+ for (i = 0; i < phba->io_channel; i += LPFC_MAX_EQ_DELAY)
+ lpfc_modify_hba_eq_delay(phba, i);
return strlen(buf);
}
@@ -4187,7 +4377,8 @@ lpfc_fcp_imax_init(struct lpfc_hba *phba, int val)
return 0;
}
- if (val >= LPFC_MIN_IMAX && val <= LPFC_MAX_IMAX) {
+ if ((val >= LPFC_MIN_IMAX && val <= LPFC_MAX_IMAX) ||
+ (val == 0)) {
phba->cfg_fcp_imax = val;
return 0;
}
@@ -4377,6 +4568,17 @@ LPFC_VPORT_ATTR_RW(first_burst_size, 0, 0, 65536,
"First burst size for Targets that support first burst");
/*
+* lpfc_nvme_enable_fb: Enable NVME first burst on I and T functions.
+* For the Initiator (I), enabling this parameter means that an NVME
+* PRLI response with FBA enabled and an FB_SIZE set to a nonzero value
+* will be processed by the initiator for subsequent NVME FCP IO.
+* Parameter supported on physical port only - no NPIV support.
+* Value range is [0,1]. Default value is 0 (disabled).
+*/
+LPFC_ATTR_RW(nvme_enable_fb, 0, 0, 1,
+ "Enable First Burst feature on I and T functions.");
+
+/*
# lpfc_max_scsicmpl_time: Use scsi command completion time to control I/O queue
# depth. Default value is 0. When the value of this parameter is zero the
# SCSI command completion time is not used for controlling I/O queue depth. When
@@ -4423,17 +4625,25 @@ static DEVICE_ATTR(lpfc_max_scsicmpl_time, S_IRUGO | S_IWUSR,
LPFC_ATTR_R(ack0, 0, 0, 1, "Enable ACK0 support");
/*
-# lpfc_fcp_io_sched: Determine scheduling algrithmn for issuing FCP cmds
-# range is [0,1]. Default value is 0.
-# For [0], FCP commands are issued to Work Queues ina round robin fashion.
-# For [1], FCP commands are issued to a Work Queue associated with the
-# current CPU.
-# It would be set to 1 by the driver if it's able to set up cpu affinity
-# for FCP I/Os through Work Queue associated with the current CPU. Otherwise,
-# roundrobin scheduling of FCP I/Os through WQs will be used.
-*/
-LPFC_ATTR_RW(fcp_io_sched, 0, 0, 1, "Determine scheduling algorithm for "
- "issuing commands [0] - Round Robin, [1] - Current CPU");
+ * lpfc_io_sched: Determine scheduling algrithmn for issuing FCP cmds
+ * range is [0,1]. Default value is 0.
+ * For [0], FCP commands are issued to Work Queues ina round robin fashion.
+ * For [1], FCP commands are issued to a Work Queue associated with the
+ * current CPU.
+ *
+ * LPFC_FCP_SCHED_ROUND_ROBIN == 0
+ * LPFC_FCP_SCHED_BY_CPU == 1
+ *
+ * The driver dynamically sets this to 1 (BY_CPU) if it's able to set up cpu
+ * affinity for FCP/NVME I/Os through Work Queues associated with the current
+ * CPU. Otherwise, the default 0 (Round Robin) scheduling of FCP/NVME I/Os
+ * through WQs will be used.
+ */
+LPFC_ATTR_RW(fcp_io_sched, LPFC_FCP_SCHED_ROUND_ROBIN,
+ LPFC_FCP_SCHED_ROUND_ROBIN,
+ LPFC_FCP_SCHED_BY_CPU,
+ "Determine scheduling algorithm for "
+ "issuing commands [0] - Round Robin, [1] - Current CPU");
/*
# lpfc_fcp2_no_tgt_reset: Determine bus reset behavior
@@ -4560,15 +4770,83 @@ LPFC_ATTR_R(use_msi, 2, 0, 2, "Use Message Signaled Interrupts (1) or "
"MSI-X (2), if possible");
/*
-# lpfc_fcp_io_channel: Set the number of FCP EQ/CQ/WQ IO channels
-#
-# Value range is [1,7]. Default value is 4.
-*/
-LPFC_ATTR_R(fcp_io_channel, LPFC_FCP_IO_CHAN_DEF, LPFC_FCP_IO_CHAN_MIN,
- LPFC_FCP_IO_CHAN_MAX,
+ * lpfc_nvme_oas: Use the oas bit when sending NVME IOs
+ *
+ * 0 = NVME OAS disabled
+ * 1 = NVME OAS enabled
+ *
+ * Value range is [0,1]. Default value is 0.
+ */
+LPFC_ATTR_RW(nvme_oas, 0, 0, 1,
+ "Use OAS bit on NVME IOs");
+
+/*
+ * lpfc_fcp_io_channel: Set the number of FCP EQ/CQ IO channels
+ *
+ * 0 = Configure the number of io channels to the number of active CPUs.
+ * 1,32 = Manually specify how many io channels to use.
+ *
+ * Value range is [0,32]. Default value is 4.
+ */
+LPFC_ATTR_R(fcp_io_channel,
+ LPFC_FCP_IO_CHAN_DEF,
+ LPFC_HBA_IO_CHAN_MIN, LPFC_HBA_IO_CHAN_MAX,
"Set the number of FCP I/O channels");
/*
+ * lpfc_fcp_max_hw_queue: Set the number of IO hardware queues the driver
+ * will advertise it supports to the SCSI layer. This also will map to
+ * the number of WQs the driver will create.
+ *
+ * 0 = Configure the number of active CPUs.
+ * 1,32 = Manually specify how many WQ IO queues to configure
+ *
+ * Value range is [0,32]. Default value is 4
+ */
+LPFC_ATTR_R(fcp_max_hw_queue, LPFC_FCP_IO_CHAN_DEF,
+ LPFC_HBA_IO_CHAN_MIN, LPFC_HBA_IO_CHAN_MAX,
+ "Set the number of FCP I/O hardware queues");
+
+/*
+ * lpfc_nvme_io_channel: Set the number of NVME EQ/CQ IO channels
+ * This module parameter is valid when lpfc_enable_fc4_type is set
+ * to support NVME.
+ *
+ * 0 = Configure the number of io channels to the number of active CPUs.
+ * 1,32 = Manually specify how many io channels to use.
+ *
+ * Value range is [0,32]. Default value is 0.
+ */
+LPFC_ATTR_R(nvme_io_channel,
+ LPFC_NVME_IO_CHAN_DEF,
+ LPFC_HBA_IO_CHAN_MIN, LPFC_HBA_IO_CHAN_MAX,
+ "Set the number of NVME I/O channels");
+
+/*
+ * lpfc_nvme_max_hw_queue: Set the number of IO hardware queues the driver
+ * will advertise it supports to the NVME layer. This also will map to
+ * the number of WQs the driver will create.
+ * The NVME Layer will try to create this many, plus 1 administrative
+ * hardware queue. The administrative queue will always map to WQ 0
+ * A hardware IO queue maps (qidx) to a specific driver WQ.
+ *
+ * 0 = Configure the number of active CPUs.
+ * 1,32 = Manually specify how many hardware IO queues to configure
+ *
+ * Value range is [0,32]. Default value is 0
+ */
+LPFC_ATTR_R(nvme_max_hw_queue, LPFC_NVME_IO_CHAN_DEF,
+ LPFC_HBA_IO_CHAN_MIN, LPFC_HBA_IO_CHAN_MAX,
+ "Set the number of NVME I/O hardware queues");
+
+/*
+ * lpfc_nvme_posted_buf - Initial number of NVME CMND IU buffers to
+ * post for the driver to use.
+ */
+LPFC_ATTR_R(nvme_posted_buf, LPFC_NVME_DEFAULT_POSTBUF, LPFC_NVME_MIN_POSTBUF,
+ LPFC_NVME_MAX_POSTBUF, "Initial NVME CMND IU buffers to allocate");
+
+/*
# lpfc_enable_hba_reset: Allow or prevent HBA resets to the hardware.
# 0 = HBA resets disabled
# 1 = HBA resets enabled (default)
@@ -4692,6 +4970,7 @@ LPFC_ATTR_R(sg_seg_cnt, LPFC_DEFAULT_SG_SEG_CNT, LPFC_DEFAULT_SG_SEG_CNT,
LPFC_ATTR_R(enable_mds_diags, 0, 0, 1, "Enable MDS Diagnostics");
struct device_attribute *lpfc_hba_attrs[] = {
+ &dev_attr_nvme_info,
&dev_attr_bg_info,
&dev_attr_bg_guard_err,
&dev_attr_bg_apptag_err,
@@ -4718,6 +4997,8 @@ struct device_attribute *lpfc_hba_attrs[] = {
&dev_attr_lpfc_peer_port_login,
&dev_attr_lpfc_nodev_tmo,
&dev_attr_lpfc_devloss_tmo,
+ &dev_attr_lpfc_enable_fc4_type,
+ &dev_attr_lpfc_xri_split,
&dev_attr_lpfc_fcp_class,
&dev_attr_lpfc_use_adisc,
&dev_attr_lpfc_first_burst_size,
@@ -4752,9 +5033,16 @@ struct device_attribute *lpfc_hba_attrs[] = {
&dev_attr_lpfc_poll_tmo,
&dev_attr_lpfc_task_mgmt_tmo,
&dev_attr_lpfc_use_msi,
+ &dev_attr_lpfc_nvme_oas,
&dev_attr_lpfc_fcp_imax,
&dev_attr_lpfc_fcp_cpu_map,
&dev_attr_lpfc_fcp_io_channel,
+ &dev_attr_lpfc_fcp_max_hw_queue,
+ &dev_attr_lpfc_suppress_rsp,
+ &dev_attr_lpfc_nvme_io_channel,
+ &dev_attr_lpfc_nvme_max_hw_queue,
+ &dev_attr_lpfc_nvme_posted_buf,
+ &dev_attr_lpfc_nvme_enable_fb,
&dev_attr_lpfc_enable_bg,
&dev_attr_lpfc_soft_wwnn,
&dev_attr_lpfc_soft_wwpn,
@@ -5764,15 +6052,17 @@ lpfc_get_cfgparam(struct lpfc_hba *phba)
lpfc_fdmi_on_init(phba, lpfc_fdmi_on);
lpfc_enable_SmartSAN_init(phba, lpfc_enable_SmartSAN);
lpfc_use_msi_init(phba, lpfc_use_msi);
+ lpfc_nvme_oas_init(phba, lpfc_nvme_oas);
lpfc_fcp_imax_init(phba, lpfc_fcp_imax);
lpfc_fcp_cpu_map_init(phba, lpfc_fcp_cpu_map);
- lpfc_fcp_io_channel_init(phba, lpfc_fcp_io_channel);
lpfc_enable_hba_reset_init(phba, lpfc_enable_hba_reset);
lpfc_enable_hba_heartbeat_init(phba, lpfc_enable_hba_heartbeat);
+
lpfc_EnableXLane_init(phba, lpfc_EnableXLane);
if (phba->sli_rev != LPFC_SLI_REV4)
phba->cfg_EnableXLane = 0;
lpfc_XLanePriority_init(phba, lpfc_XLanePriority);
+
memset(phba->cfg_oas_tgt_wwpn, 0, (8 * sizeof(uint8_t)));
memset(phba->cfg_oas_vpt_wwpn, 0, (8 * sizeof(uint8_t)));
phba->cfg_oas_lun_state = 0;
@@ -5786,9 +6076,48 @@ lpfc_get_cfgparam(struct lpfc_hba *phba)
phba->cfg_poll = 0;
else
phba->cfg_poll = lpfc_poll;
+ lpfc_suppress_rsp_init(phba, lpfc_suppress_rsp);
+
+ lpfc_enable_fc4_type_init(phba, lpfc_enable_fc4_type);
+
+ /* Initialize first burst. Target vs Initiator are different. */
+ lpfc_nvme_enable_fb_init(phba, lpfc_nvme_enable_fb);
+ lpfc_fcp_io_channel_init(phba, lpfc_fcp_io_channel);
+ lpfc_fcp_max_hw_queue_init(phba, lpfc_fcp_max_hw_queue);
+ lpfc_nvme_io_channel_init(phba, lpfc_nvme_io_channel);
+ lpfc_nvme_max_hw_queue_init(phba, lpfc_nvme_max_hw_queue);
+ lpfc_nvme_posted_buf_init(phba, lpfc_nvme_posted_buf);
+
+ /* NVME only supported on SLI4 */
+ if (phba->sli_rev != LPFC_SLI_REV4) {
+ phba->nvmet_support = 0;
+ phba->cfg_enable_fc4_type &= ~LPFC_ENABLE_NVME;
+ }
+
+ /* A value of 0 means use the number of CPUs found in the system */
+ if (phba->cfg_nvme_io_channel == 0)
+ phba->cfg_nvme_io_channel = phba->sli4_hba.num_present_cpu;
+ if (phba->cfg_fcp_io_channel == 0)
+ phba->cfg_fcp_io_channel = phba->sli4_hba.num_present_cpu;
+ if (phba->cfg_fcp_max_hw_queue == 0)
+ phba->cfg_fcp_max_hw_queue = phba->sli4_hba.num_present_cpu;
+ if (phba->cfg_nvme_max_hw_queue == 0)
+ phba->cfg_nvme_max_hw_queue = phba->sli4_hba.num_present_cpu;
+
+ if (phba->cfg_enable_fc4_type == LPFC_ENABLE_FCP)
+ phba->cfg_nvme_io_channel = 0;
+
+ if (phba->cfg_enable_fc4_type == LPFC_ENABLE_NVME)
+ phba->cfg_fcp_io_channel = 0;
+
+ if (phba->cfg_fcp_io_channel > phba->cfg_nvme_io_channel)
+ phba->io_channel = phba->cfg_fcp_io_channel;
+ else
+ phba->io_channel = phba->cfg_nvme_io_channel;
phba->cfg_soft_wwnn = 0L;
phba->cfg_soft_wwpn = 0L;
+ lpfc_xri_split_init(phba, lpfc_xri_split);
lpfc_sg_seg_cnt_init(phba, lpfc_sg_seg_cnt);
lpfc_hba_queue_depth_init(phba, lpfc_hba_queue_depth);
lpfc_hba_log_verbose_init(phba, lpfc_log_verbose);
@@ -5805,6 +6134,39 @@ lpfc_get_cfgparam(struct lpfc_hba *phba)
}
/**
+ * lpfc_nvme_mod_param_dep - Adjust module parameter value based on
+ * dependencies between protocols and roles.
+ * @phba: lpfc_hba pointer.
+ **/
+void
+lpfc_nvme_mod_param_dep(struct lpfc_hba *phba)
+{
+ phba->nvmet_support = 0;
+ if (phba->cfg_nvme_max_hw_queue > phba->sli4_hba.num_present_cpu)
+ phba->cfg_nvme_max_hw_queue = phba->sli4_hba.num_present_cpu;
+ if (phba->cfg_fcp_max_hw_queue > phba->sli4_hba.num_present_cpu)
+ phba->cfg_fcp_max_hw_queue = phba->sli4_hba.num_present_cpu;
+
+ /* Its a waste to have more IO channels then hdw queues */
+ if ((phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) &&
+ !phba->nvmet_support) {
+ if (phba->cfg_nvme_max_hw_queue < phba->cfg_nvme_io_channel)
+ phba->cfg_nvme_io_channel = phba->cfg_nvme_max_hw_queue;
+ }
+
+ if ((phba->cfg_enable_fc4_type & LPFC_ENABLE_FCP) &&
+ !phba->nvmet_support) {
+ if (phba->cfg_fcp_max_hw_queue < phba->cfg_fcp_io_channel)
+ phba->cfg_fcp_io_channel = phba->cfg_fcp_max_hw_queue;
+ }
+
+ if (phba->cfg_fcp_io_channel > phba->cfg_nvme_io_channel)
+ phba->io_channel = phba->cfg_fcp_io_channel;
+ else
+ phba->io_channel = phba->cfg_nvme_io_channel;
+}
+
+/**
* lpfc_get_vport_cfgparam - Used during port create, init the vport structure
* @vport: lpfc_vport pointer.
**/
--
2.5.0
More information about the Linux-nvme
mailing list