[PATCH v2 01/13] mpt3sas: Update MPI Header

Hannes Reinecke hare at suse.de
Wed Aug 2 23:24:59 PDT 2017


On 07/14/2017 03:22 PM, Suganath Prabu S wrote:
> Update MPI Files for NVMe support
> 
> Signed-off-by: Chaitra P B <chaitra.basappa at broadcom.com>
> Signed-off-by: Suganath Prabu S <suganath-prabu.subramani at broadcom.com>
> ---
>  drivers/scsi/mpt3sas/mpi/mpi2.h      |   43 +++-
>  drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h |  647 +++++++++++++++++++++++++++++++++-
>  drivers/scsi/mpt3sas/mpi/mpi2_init.h |   11 +-
>  drivers/scsi/mpt3sas/mpi/mpi2_ioc.h  |  331 +++++++++++++++++-
>  drivers/scsi/mpt3sas/mpi/mpi2_pci.h  |  142 ++++++++
>  drivers/scsi/mpt3sas/mpi/mpi2_tool.h |   14 +-
>  6 files changed, 1177 insertions(+), 11 deletions(-)
>  create mode 100644 drivers/scsi/mpt3sas/mpi/mpi2_pci.h
> 
> diff --git a/drivers/scsi/mpt3sas/mpi/mpi2.h b/drivers/scsi/mpt3sas/mpi/mpi2.h
> index a9a659f..bc59058 100644
> --- a/drivers/scsi/mpt3sas/mpi/mpi2.h
> +++ b/drivers/scsi/mpt3sas/mpi/mpi2.h
> @@ -8,7 +8,7 @@
>   *                 scatter/gather formats.
>   * Creation Date:  June 21, 2006
>   *
> - * mpi2.h Version:  02.00.42
> + * mpi2.h Version:  02.00.48
>   *
>   * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
>   *       prefix are for use only on MPI v2.5 products, and must not be used
> @@ -103,6 +103,16 @@
>   * 08-25-15  02.00.40  Bumped MPI2_HEADER_VERSION_UNIT.
>   * 12-15-15  02.00.41  Bumped MPI_HEADER_VERSION_UNIT
>   * 01-01-16  02.00.42  Bumped MPI_HEADER_VERSION_UNIT
> + * 04-05-16  02.00.43  Modified  MPI26_DIAG_BOOT_DEVICE_SELECT defines
> + *                     to be unique within first 32 characters.
> + *                     Removed AHCI support.
> + *                     Removed SOP support.
> + *                     Bumped MPI2_HEADER_VERSION_UNIT.
> + * 04-10-16  02.00.44  Bumped MPI2_HEADER_VERSION_UNIT.
> + * 07-06-16  02.00.45  Bumped MPI2_HEADER_VERSION_UNIT.
> + * 09-02-16  02.00.46  Bumped MPI2_HEADER_VERSION_UNIT.
> + * 11-23-16  02.00.47  Bumped MPI2_HEADER_VERSION_UNIT.
> + * 02-03-17  02.00.48  Bumped MPI2_HEADER_VERSION_UNIT.
>   * --------------------------------------------------------------------------
>   */
>  
> @@ -142,7 +152,7 @@
>  #define MPI2_VERSION_02_06		    (0x0206)
>  
>  /*Unit and Dev versioning for this MPI header set */
> -#define MPI2_HEADER_VERSION_UNIT            (0x2A)
> +#define MPI2_HEADER_VERSION_UNIT            (0x30)
>  #define MPI2_HEADER_VERSION_DEV             (0x00)
>  #define MPI2_HEADER_VERSION_UNIT_MASK       (0xFF00)
>  #define MPI2_HEADER_VERSION_UNIT_SHIFT      (8)
> @@ -249,6 +259,12 @@ typedef volatile struct _MPI2_SYSTEM_INTERFACE_REGS {
>  #define MPI2_DIAG_BOOT_DEVICE_SELECT_DEFAULT    (0x00000000)
>  #define MPI2_DIAG_BOOT_DEVICE_SELECT_HCDW       (0x00000800)
>  
> +/* Defines for V7A/V7R HostDiagnostic Register */
> +#define MPI26_DIAG_BOOT_DEVICE_SEL_64FLASH      (0x00000000)
> +#define MPI26_DIAG_BOOT_DEVICE_SEL_64HCDW       (0x00000800)
> +#define MPI26_DIAG_BOOT_DEVICE_SEL_32FLASH      (0x00001000)
> +#define MPI26_DIAG_BOOT_DEVICE_SEL_32HCDW       (0x00001800)
> +
>  #define MPI2_DIAG_CLEAR_FLASH_BAD_SIG           (0x00000400)
>  #define MPI2_DIAG_FORCE_HCB_ON_RESET            (0x00000200)
>  #define MPI2_DIAG_HCB_MODE                      (0x00000100)
> @@ -367,6 +383,7 @@ typedef struct _MPI2_DEFAULT_REQUEST_DESCRIPTOR {
>  #define MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE            (0x08)
>  #define MPI2_REQ_DESCRIPT_FLAGS_RAID_ACCELERATOR        (0x0A)
>  #define MPI25_REQ_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO      (0x0C)
> +#define MPI26_REQ_DESCRIPT_FLAGS_PCIE_ENCAPSULATED      (0x10)
>  
>  #define MPI2_REQ_DESCRIPT_FLAGS_IOC_FIFO_MARKER         (0x01)
>  
> @@ -425,6 +442,13 @@ typedef MPI2_SCSI_IO_REQUEST_DESCRIPTOR
>  	Mpi25FastPathSCSIIORequestDescriptor_t,
>  	*pMpi25FastPathSCSIIORequestDescriptor_t;
>  
> +/*PCIe Encapsulated Request Descriptor */
> +typedef MPI2_SCSI_IO_REQUEST_DESCRIPTOR
> +	MPI26_PCIE_ENCAPSULATED_REQUEST_DESCRIPTOR,
> +	*PTR_MPI26_PCIE_ENCAPSULATED_REQUEST_DESCRIPTOR,
> +	Mpi26PCIeEncapsulatedRequestDescriptor_t,
> +	*pMpi26PCIeEncapsulatedRequestDescriptor_t;
> +
>  /*union of Request Descriptors */
>  typedef union _MPI2_REQUEST_DESCRIPTOR_UNION {
>  	MPI2_DEFAULT_REQUEST_DESCRIPTOR Default;
> @@ -433,6 +457,7 @@ typedef union _MPI2_REQUEST_DESCRIPTOR_UNION {
>  	MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR SCSITarget;
>  	MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR RAIDAccelerator;
>  	MPI25_FP_SCSI_IO_REQUEST_DESCRIPTOR FastPathSCSIIO;
> +	MPI26_PCIE_ENCAPSULATED_REQUEST_DESCRIPTOR PCIeEncapsulated;
>  	U64 Words;
>  } MPI2_REQUEST_DESCRIPTOR_UNION,
>  	*PTR_MPI2_REQUEST_DESCRIPTOR_UNION,
> @@ -450,6 +475,7 @@ typedef union _MPI2_REQUEST_DESCRIPTOR_UNION {
>   *      Atomic SCSI Target Request Descriptor
>   *      Atomic RAID Accelerator Request Descriptor
>   *      Atomic Fast Path SCSI IO Request Descriptor
> + *      Atomic PCIe Encapsulated Request Descriptor
>   */
>  
>  /*Atomic Request Descriptor */
> @@ -487,6 +513,7 @@ typedef struct _MPI2_DEFAULT_REPLY_DESCRIPTOR {
>  #define MPI2_RPY_DESCRIPT_FLAGS_TARGET_COMMAND_BUFFER       (0x03)
>  #define MPI2_RPY_DESCRIPT_FLAGS_RAID_ACCELERATOR_SUCCESS    (0x05)
>  #define MPI25_RPY_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO_SUCCESS  (0x06)
> +#define MPI26_RPY_DESCRIPT_FLAGS_PCIE_ENCAPSULATED_SUCCESS  (0x08)
>  #define MPI2_RPY_DESCRIPT_FLAGS_UNUSED                      (0x0F)
>  
>  /*values for marking a reply descriptor as unused */
> @@ -565,6 +592,13 @@ typedef MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR
>  	Mpi25FastPathSCSIIOSuccessReplyDescriptor_t,
>  	*pMpi25FastPathSCSIIOSuccessReplyDescriptor_t;
>  
> +/*PCIe Encapsulated Success Reply Descriptor */
> +typedef MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR
> +	MPI26_PCIE_ENCAPSULATED_SUCCESS_REPLY_DESCRIPTOR,
> +	*PTR_MPI26_PCIE_ENCAPSULATED_SUCCESS_REPLY_DESCRIPTOR,
> +	Mpi26PCIeEncapsulatedSuccessReplyDescriptor_t,
> +	*pMpi26PCIeEncapsulatedSuccessReplyDescriptor_t;
> +
>  /*union of Reply Descriptors */
>  typedef union _MPI2_REPLY_DESCRIPTORS_UNION {
>  	MPI2_DEFAULT_REPLY_DESCRIPTOR Default;
> @@ -574,6 +608,8 @@ typedef union _MPI2_REPLY_DESCRIPTORS_UNION {
>  	MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR TargetCommandBuffer;
>  	MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR RAIDAcceleratorSuccess;
>  	MPI25_FP_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR FastPathSCSIIOSuccess;
> +	MPI26_PCIE_ENCAPSULATED_SUCCESS_REPLY_DESCRIPTOR
> +						PCIeEncapsulatedSuccess;
>  	U64 Words;
>  } MPI2_REPLY_DESCRIPTORS_UNION,
>  	*PTR_MPI2_REPLY_DESCRIPTORS_UNION,
> @@ -616,6 +652,7 @@ typedef union _MPI2_REPLY_DESCRIPTORS_UNION {
>  #define MPI2_FUNCTION_HOST_BASED_DISCOVERY_ACTION   (0x2F)
>  #define MPI2_FUNCTION_PWR_MGMT_CONTROL              (0x30)
>  #define MPI2_FUNCTION_SEND_HOST_MESSAGE             (0x31)
> +#define MPI2_FUNCTION_NVME_ENCAPSULATED             (0x33)
>  #define MPI2_FUNCTION_MIN_PRODUCT_SPECIFIC          (0xF0)
>  #define MPI2_FUNCTION_MAX_PRODUCT_SPECIFIC          (0xFF)
>  
> @@ -1162,6 +1199,8 @@ typedef union _MPI25_SGE_IO_UNION {
>  
>  #define MPI26_IEEE_SGE_FLAGS_NSF_MASK           (0x1C)
>  #define MPI26_IEEE_SGE_FLAGS_NSF_MPI_IEEE       (0x00)
> +#define MPI26_IEEE_SGE_FLAGS_NSF_NVME_PRP       (0x08)
> +#define MPI26_IEEE_SGE_FLAGS_NSF_NVME_SGL       (0x10)
>  
>  /*Data Location Address Space */
>  
> diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
> index fa61baf..3bb6833 100644
> --- a/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
> +++ b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
> @@ -6,7 +6,7 @@
>   *         Title:  MPI Configuration messages and pages
>   * Creation Date:  November 10, 2006
>   *
> - *   mpi2_cnfg.h Version:  02.00.35
> + *   mpi2_cnfg.h Version:  02.00.40
>   *
>   * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
>   *       prefix are for use only on MPI v2.5 products, and must not be used
> @@ -189,6 +189,35 @@
>   *                     MPI2_CONFIG_PAGE_BIOS_1.
>   * 08-25-15  02.00.34  Bumped Header Version.
>   * 12-18-15  02.00.35  Added SATADeviceWaitTime to SAS IO Unit Page 4.
> + * 01-21-16  02.00.36  Added/modified MPI2_MFGPAGE_DEVID_SAS defines.
> + *                     Added Link field to PCIe Link Pages
> + *                     Added EnclosureLevel and ConnectorName to PCIe
> + *                     Device Page 0.
> + *                     Added define for PCIE IoUnit page 1 max rate shift.
> + *                     Added comment for reserved ExtPageTypes.
> + *                     Added SAS 4 22.5 gbs speed support.
> + *                     Added PCIe 4 16.0 GT/sec speec support.
> + *                     Removed AHCI support.
> + *                     Removed SOP support.
> + *                     Added NegotiatedLinkRate and NegotiatedPortWidth to
> + *                     PCIe device page 0.
> + * 04-10-16  02.00.37  Fixed MPI2_MFGPAGE_DEVID_SAS3616/3708 defines
> + * 07-01-16  02.00.38  Added Manufacturing page 7 Connector types.
> + *                     Changed declaration of ConnectorName in PCIe DevicePage0
> + *                     to match SAS DevicePage 0.
> + *                     Added SATADeviceWaitTime to IO Unit Page 11.
> + *                     Added MPI26_MFGPAGE_DEVID_SAS4008
> + *                     Added x16 PCIe width to IO Unit Page 7
> + *                     Added LINKFLAGS to control SRIS in PCIe IO Unit page 1
> + *                     phy data.
> + *                     Added InitStatus to PCIe IO Unit Page 1 header.
> + * 09-01-16  02.00.39  Added MPI26_CONFIG_PAGE_ENCLOSURE_0 and related defines.
> + *                     Added MPI26_ENCLOS_PGAD_FORM_GET_NEXT_HANDLE and
> + *                     MPI26_ENCLOS_PGAD_FORM_HANDLE page address formats.
> + * 02-02-17  02.00.40  Added MPI2_MANPAGE7_SLOT_UNKNOWN.
> + *                     Added ChassisSlot field to SAS Enclosure Page 0.
> + *                     Added ChassisSlot Valid bit (bit 5) to the Flags field
> + *                     in SAS Enclosure Page 0.
>   * --------------------------------------------------------------------------
>   */
>  
> @@ -272,6 +301,10 @@ typedef union _MPI2_CONFIG_EXT_PAGE_HEADER_UNION {
>  #define MPI2_CONFIG_EXTPAGETYPE_SAS_PORT            (0x18)
>  #define MPI2_CONFIG_EXTPAGETYPE_ETHERNET            (0x19)
>  #define MPI2_CONFIG_EXTPAGETYPE_EXT_MANUFACTURING   (0x1A)
> +#define MPI2_CONFIG_EXTPAGETYPE_PCIE_IO_UNIT        (0x1B)
> +#define MPI2_CONFIG_EXTPAGETYPE_PCIE_SWITCH         (0x1C)
> +#define MPI2_CONFIG_EXTPAGETYPE_PCIE_DEVICE         (0x1D)
> +#define MPI2_CONFIG_EXTPAGETYPE_PCIE_LINK           (0x1E)
>  
>  
>  /*****************************************************************************
> @@ -339,6 +372,12 @@ typedef union _MPI2_CONFIG_EXT_PAGE_HEADER_UNION {
>  
>  #define MPI2_SAS_ENCLOS_PGAD_HANDLE_MASK            (0x0000FFFF)
>  
> +/*Enclosure PageAddress format */
> +#define MPI26_ENCLOS_PGAD_FORM_MASK                 (0xF0000000)
> +#define MPI26_ENCLOS_PGAD_FORM_GET_NEXT_HANDLE      (0x00000000)
> +#define MPI26_ENCLOS_PGAD_FORM_HANDLE               (0x10000000)
> +
> +#define MPI26_ENCLOS_PGAD_HANDLE_MASK               (0x0000FFFF)
>  
>  /*RAID Configuration PageAddress format */
>  #define MPI2_RAID_PGAD_FORM_MASK                    (0xF0000000)
> @@ -365,6 +404,33 @@ typedef union _MPI2_CONFIG_EXT_PAGE_HEADER_UNION {
>  #define MPI2_ETHERNET_PGAD_IF_NUMBER_MASK           (0x000000FF)
>  
>  
> +/*PCIe Switch PageAddress format */
> +#define MPI26_PCIE_SWITCH_PGAD_FORM_MASK            (0xF0000000)
> +#define MPI26_PCIE_SWITCH_PGAD_FORM_GET_NEXT_HNDL   (0x00000000)
> +#define MPI26_PCIE_SWITCH_PGAD_FORM_HNDL_PORTNUM    (0x10000000)
> +#define MPI26_PCIE_SWITCH_EXPAND_PGAD_FORM_HNDL     (0x20000000)
> +
> +#define MPI26_PCIE_SWITCH_PGAD_HANDLE_MASK          (0x0000FFFF)
> +#define MPI26_PCIE_SWITCH_PGAD_PORTNUM_MASK         (0x00FF0000)
> +#define MPI26_PCIE_SWITCH_PGAD_PORTNUM_SHIFT        (16)
> +
> +
> +/*PCIe Device PageAddress format */
> +#define MPI26_PCIE_DEVICE_PGAD_FORM_MASK            (0xF0000000)
> +#define MPI26_PCIE_DEVICE_PGAD_FORM_GET_NEXT_HANDLE (0x00000000)
> +#define MPI26_PCIE_DEVICE_PGAD_FORM_HANDLE          (0x20000000)
> +
> +#define MPI26_PCIE_DEVICE_PGAD_HANDLE_MASK          (0x0000FFFF)
> +
> +/*PCIe Link PageAddress format */
> +#define MPI26_PCIE_LINK_PGAD_FORM_MASK            (0xF0000000)
> +#define MPI26_PCIE_LINK_PGAD_FORM_GET_NEXT_LINK   (0x00000000)
> +#define MPI26_PCIE_LINK_PGAD_FORM_LINK_NUM        (0x10000000)
> +
> +#define MPI26_PCIE_DEVICE_PGAD_LINKNUM_MASK       (0x000000FF)
> +
> +
> +
>  /****************************************************************************
>  *  Configuration messages
>  ****************************************************************************/
> @@ -484,6 +550,12 @@ typedef struct _MPI2_CONFIG_REPLY {
>  #define MPI26_MFGPAGE_DEVID_SAS3508                 (0x00AD)
>  #define MPI26_MFGPAGE_DEVID_SAS3508_1               (0x00AE)
>  #define MPI26_MFGPAGE_DEVID_SAS3408                 (0x00AF)
> +#define MPI26_MFGPAGE_DEVID_SAS3716                 (0x00D0)
> +#define MPI26_MFGPAGE_DEVID_SAS3616                 (0x00D1)
> +#define MPI26_MFGPAGE_DEVID_SAS3708                 (0x00D2)
> +
> +#define MPI26_MFGPAGE_DEVID_SAS4008                 (0x00A1)
> +
>  
>  /*Manufacturing Page 0 */
>  
> @@ -726,6 +798,12 @@ typedef struct _MPI2_MANPAGE7_CONNECTOR_INFO {
>  #define MPI2_MANPAGE7_PINOUT_SFF_8644_8X                (0x0B)
>  #define MPI2_MANPAGE7_PINOUT_SFF_8644_16X               (0x0C)
>  #define MPI2_MANPAGE7_PINOUT_SFF_8436                   (0x0D)
> +#define MPI2_MANPAGE7_PINOUT_SFF_8088_A                 (0x0E)
> +#define MPI2_MANPAGE7_PINOUT_SFF_8643_16i               (0x0F)
> +#define MPI2_MANPAGE7_PINOUT_SFF_8654_4i                (0x10)
> +#define MPI2_MANPAGE7_PINOUT_SFF_8654_8i                (0x11)
> +#define MPI2_MANPAGE7_PINOUT_SFF_8611_4i                (0x12)
> +#define MPI2_MANPAGE7_PINOUT_SFF_8611_8i                (0x13)
>  
>  /*defines for the Location field */
>  #define MPI2_MANPAGE7_LOCATION_UNKNOWN                  (0x01)
> @@ -736,6 +814,9 @@ typedef struct _MPI2_MANPAGE7_CONNECTOR_INFO {
>  #define MPI2_MANPAGE7_LOCATION_NOT_PRESENT              (0x20)
>  #define MPI2_MANPAGE7_LOCATION_NOT_CONNECTED            (0x80)
>  
> +/*defines for the Slot field */
> +#define MPI2_MANPAGE7_SLOT_UNKNOWN                      (0xFFFF)
> +
>  /*
>   *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
>   *one and check the value returned for NumPhys at runtime.
> @@ -999,11 +1080,13 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_7 {
>  #define MPI2_IOUNITPAGE7_PCIE_WIDTH_X2              (0x02)
>  #define MPI2_IOUNITPAGE7_PCIE_WIDTH_X4              (0x04)
>  #define MPI2_IOUNITPAGE7_PCIE_WIDTH_X8              (0x08)
> +#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X16             (0x10)
>  
>  /*defines for IO Unit Page 7 PCIeSpeed field */
>  #define MPI2_IOUNITPAGE7_PCIE_SPEED_2_5_GBPS        (0x00)
>  #define MPI2_IOUNITPAGE7_PCIE_SPEED_5_0_GBPS        (0x01)
>  #define MPI2_IOUNITPAGE7_PCIE_SPEED_8_0_GBPS        (0x02)
> +#define MPI2_IOUNITPAGE7_PCIE_SPEED_16_0_GBPS       (0x03)
>  
>  /*defines for IO Unit Page 7 ProcessorState field */
>  #define MPI2_IOUNITPAGE7_PSTATE_MASK_SECOND         (0x0000000F)
> @@ -1970,6 +2053,7 @@ typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_1 {
>  #define MPI2_SAS_NEG_LINK_RATE_3_0                      (0x09)
>  #define MPI2_SAS_NEG_LINK_RATE_6_0                      (0x0A)
>  #define MPI25_SAS_NEG_LINK_RATE_12_0                    (0x0B)
> +#define MPI26_SAS_NEG_LINK_RATE_22_5                    (0x0C)
>  
>  
>  /*values for AttachedPhyInfo fields */
> @@ -2037,12 +2121,14 @@ typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_1 {
>  #define MPI2_SAS_PRATE_MAX_RATE_3_0                     (0x90)
>  #define MPI2_SAS_PRATE_MAX_RATE_6_0                     (0xA0)
>  #define MPI25_SAS_PRATE_MAX_RATE_12_0                   (0xB0)
> +#define MPI26_SAS_PRATE_MAX_RATE_22_5                   (0xC0)
>  #define MPI2_SAS_PRATE_MIN_RATE_MASK                    (0x0F)
>  #define MPI2_SAS_PRATE_MIN_RATE_NOT_PROGRAMMABLE        (0x00)
>  #define MPI2_SAS_PRATE_MIN_RATE_1_5                     (0x08)
>  #define MPI2_SAS_PRATE_MIN_RATE_3_0                     (0x09)
>  #define MPI2_SAS_PRATE_MIN_RATE_6_0                     (0x0A)
>  #define MPI25_SAS_PRATE_MIN_RATE_12_0                   (0x0B)
> +#define MPI26_SAS_PRATE_MIN_RATE_22_5                   (0x0C)
>  
>  
>  /*values for SAS HwLinkRate fields */
> @@ -2051,11 +2137,13 @@ typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_1 {
>  #define MPI2_SAS_HWRATE_MAX_RATE_3_0                    (0x90)
>  #define MPI2_SAS_HWRATE_MAX_RATE_6_0                    (0xA0)
>  #define MPI25_SAS_HWRATE_MAX_RATE_12_0                  (0xB0)
> +#define MPI26_SAS_HWRATE_MAX_RATE_22_5                  (0xC0)
>  #define MPI2_SAS_HWRATE_MIN_RATE_MASK                   (0x0F)
>  #define MPI2_SAS_HWRATE_MIN_RATE_1_5                    (0x08)
>  #define MPI2_SAS_HWRATE_MIN_RATE_3_0                    (0x09)
>  #define MPI2_SAS_HWRATE_MIN_RATE_6_0                    (0x0A)
>  #define MPI25_SAS_HWRATE_MIN_RATE_12_0                  (0x0B)
> +#define MPI26_SAS_HWRATE_MIN_RATE_22_5                  (0x0C)
>  
>  
>  
> @@ -2240,11 +2328,13 @@ typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_1 {
>  #define MPI2_SASIOUNIT1_MAX_RATE_3_0                                (0x90)
>  #define MPI2_SASIOUNIT1_MAX_RATE_6_0                                (0xA0)
>  #define MPI25_SASIOUNIT1_MAX_RATE_12_0                              (0xB0)
> +#define MPI26_SASIOUNIT1_MAX_RATE_22_5                              (0xC0)
>  #define MPI2_SASIOUNIT1_MIN_RATE_MASK                               (0x0F)
>  #define MPI2_SASIOUNIT1_MIN_RATE_1_5                                (0x08)
>  #define MPI2_SASIOUNIT1_MIN_RATE_3_0                                (0x09)
>  #define MPI2_SASIOUNIT1_MIN_RATE_6_0                                (0x0A)
>  #define MPI25_SASIOUNIT1_MIN_RATE_12_0                              (0x0B)
> +#define MPI26_SASIOUNIT1_MIN_RATE_22_5                              (0x0C)
>  
>  /*see mpi2_sas.h for values for
>   *SAS IO Unit Page 1 ControllerPhyDeviceInfo values */
> @@ -3173,7 +3263,7 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0 {
>  	U16
>  		StartSlot;                  /*0x1A */
>  	U8
> -		Reserved2;                  /*0x1C */
> +		ChassisSlot;                /*0x1C */
>  	U8
>  		EnclosureLevel;		    /*0x1D */
>  	U16
> @@ -3184,11 +3274,15 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0 {
>  		Reserved4;                  /*0x24 */
>  } MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0,
>  	*PTR_MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0,
> -	Mpi2SasEnclosurePage0_t, *pMpi2SasEnclosurePage0_t;
> +	Mpi2SasEnclosurePage0_t, *pMpi2SasEnclosurePage0_t,
> +	MPI26_CONFIG_PAGE_ENCLOSURE_0,
> +	*PTR_MPI26_CONFIG_PAGE_ENCLOSURE_0,
> +	Mpi26EnclosurePage0_t, *pMpi26EnclosurePage0_t;
>  
>  #define MPI2_SASENCLOSURE0_PAGEVERSION      (0x04)
>  
>  /*values for SAS Enclosure Page 0 Flags field */
> +#define MPI2_SAS_ENCLS0_FLAGS_CHASSIS_SLOT_VALID    (0x0020)
>  #define MPI2_SAS_ENCLS0_FLAGS_ENCL_LEVEL_VALID      (0x0010)
>  #define MPI2_SAS_ENCLS0_FLAGS_MNG_MASK              (0x000F)
>  #define MPI2_SAS_ENCLS0_FLAGS_MNG_UNKNOWN           (0x0000)
> @@ -3198,6 +3292,18 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0 {
>  #define MPI2_SAS_ENCLS0_FLAGS_MNG_SES_ENCLOSURE     (0x0004)
>  #define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_GPIO          (0x0005)
>  
> +#define MPI26_ENCLOSURE0_PAGEVERSION        (0x04)
> +
> +/*Values for Enclosure Page 0 Flags field */
> +#define MPI26_ENCLS0_FLAGS_CHASSIS_SLOT_VALID       (0x0020)
> +#define MPI26_ENCLS0_FLAGS_ENCL_LEVEL_VALID         (0x0010)
> +#define MPI26_ENCLS0_FLAGS_MNG_MASK                 (0x000F)
> +#define MPI26_ENCLS0_FLAGS_MNG_UNKNOWN              (0x0000)
> +#define MPI26_ENCLS0_FLAGS_MNG_IOC_SES              (0x0001)
> +#define MPI26_ENCLS0_FLAGS_MNG_IOC_SGPIO            (0x0002)
> +#define MPI26_ENCLS0_FLAGS_MNG_EXP_SGPIO            (0x0003)
> +#define MPI26_ENCLS0_FLAGS_MNG_SES_ENCLOSURE        (0x0004)
> +#define MPI26_ENCLS0_FLAGS_MNG_IOC_GPIO             (0x0005)
>  
>  /****************************************************************************
>  *  Log Config Page
> @@ -3497,4 +3603,539 @@ typedef struct _MPI2_CONFIG_PAGE_EXT_MAN_PS {
>  
>  /*PageVersion should be provided by product-specific code */
>  
> +
> +
> +/****************************************************************************
> +*  values for fields used by several types of PCIe Config Pages
> +****************************************************************************/
> +
> +/*values for NegotiatedLinkRates fields */
> +#define MPI26_PCIE_NEG_LINK_RATE_MASK_PHYSICAL          (0x0F)
> +/*link rates used for Negotiated Physical Link Rate */
> +#define MPI26_PCIE_NEG_LINK_RATE_UNKNOWN                (0x00)
> +#define MPI26_PCIE_NEG_LINK_RATE_PHY_DISABLED           (0x01)
> +#define MPI26_PCIE_NEG_LINK_RATE_2_5                    (0x02)
> +#define MPI26_PCIE_NEG_LINK_RATE_5_0                    (0x03)
> +#define MPI26_PCIE_NEG_LINK_RATE_8_0                    (0x04)
> +#define MPI26_PCIE_NEG_LINK_RATE_16_0                   (0x05)
> +
> +
> +/****************************************************************************
> +*  PCIe IO Unit Config Pages (MPI v2.6 and later)
> +****************************************************************************/
> +
> +/*PCIe IO Unit Page 0 */
> +
> +typedef struct _MPI26_PCIE_IO_UNIT0_PHY_DATA {
> +	U8
> +		Link;                   /*0x00 */
> +	U8
> +		LinkFlags;              /*0x01 */
> +	U8
> +		PhyFlags;               /*0x02 */
> +	U8
> +		NegotiatedLinkRate;     /*0x03 */
> +	U32
> +		ControllerPhyDeviceInfo;/*0x04 */
> +	U16
> +		AttachedDevHandle;      /*0x08 */
> +	U16
> +		ControllerDevHandle;    /*0x0A */
> +	U32
> +		EnumerationStatus;      /*0x0C */
> +	U32
> +		Reserved1;              /*0x10 */
> +} MPI26_PCIE_IO_UNIT0_PHY_DATA,
> +	*PTR_MPI26_PCIE_IO_UNIT0_PHY_DATA,
> +	Mpi26PCIeIOUnit0PhyData_t, *pMpi26PCIeIOUnit0PhyData_t;
> +
> +/*
> + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
> + *one and check the value returned for NumPhys at runtime.
> + */
> +#ifndef MPI26_PCIE_IOUNIT0_PHY_MAX
> +#define MPI26_PCIE_IOUNIT0_PHY_MAX      (1)
> +#endif
> +
> +typedef struct _MPI26_CONFIG_PAGE_PIOUNIT_0 {
> +	MPI2_CONFIG_EXTENDED_PAGE_HEADER
> +		Header;                                 /*0x00 */
> +	U32
> +		Reserved1;                              /*0x08 */
> +	U8
> +		NumPhys;                                /*0x0C */
> +	U8
> +		InitStatus;                             /*0x0D */
> +	U16
> +		Reserved3;                              /*0x0E */
> +	MPI26_PCIE_IO_UNIT0_PHY_DATA
> +		PhyData[MPI26_PCIE_IOUNIT0_PHY_MAX];    /*0x10 */
> +} MPI26_CONFIG_PAGE_PIOUNIT_0,
> +	*PTR_MPI26_CONFIG_PAGE_PIOUNIT_0,
> +	Mpi26PCIeIOUnitPage0_t, *pMpi26PCIeIOUnitPage0_t;
> +
> +#define MPI26_PCIEIOUNITPAGE0_PAGEVERSION                   (0x00)
> +
> +/*values for PCIe IO Unit Page 0 LinkFlags */
> +#define MPI26_PCIEIOUNIT0_LINKFLAGS_ENUMERATION_IN_PROGRESS (0x08)
> +
> +/*values for PCIe IO Unit Page 0 PhyFlags */
> +#define MPI26_PCIEIOUNIT0_PHYFLAGS_PHY_DISABLED             (0x08)
> +
> +/*use MPI26_PCIE_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */
> +
> +/*see mpi2_pci.h for values for PCIe IO Unit Page 0 ControllerPhyDeviceInfo
> + *values
> + */
> +
> +/*values for PCIe IO Unit Page 0 EnumerationStatus */
> +#define MPI26_PCIEIOUNIT0_ES_MAX_SWITCHES_EXCEEDED          (0x40000000)
> +#define MPI26_PCIEIOUNIT0_ES_MAX_DEVICES_EXCEEDED           (0x20000000)
> +
> +
> +/*PCIe IO Unit Page 1 */
> +
> +typedef struct _MPI26_PCIE_IO_UNIT1_PHY_DATA {
> +	U8
> +		Link;                       /*0x00 */
> +	U8
> +		LinkFlags;                  /*0x01 */
> +	U8
> +		PhyFlags;                   /*0x02 */
> +	U8
> +		MaxMinLinkRate;             /*0x03 */
> +	U32
> +		ControllerPhyDeviceInfo;    /*0x04 */
> +	U32
> +		Reserved1;                  /*0x08 */
> +} MPI26_PCIE_IO_UNIT1_PHY_DATA,
> +	*PTR_MPI26_PCIE_IO_UNIT1_PHY_DATA,
> +	Mpi26PCIeIOUnit1PhyData_t, *pMpi26PCIeIOUnit1PhyData_t;
> +
> +/*values for LinkFlags */
> +#define MPI26_PCIEIOUNIT1_LINKFLAGS_DIS_SRIS    (0x00)
> +#define MPI26_PCIEIOUNIT1_LINKFLAGS_EN_SRIS     (0x01)
> +
> +/*
> + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
> + *one and check the value returned for NumPhys at runtime.
> + */
> +#ifndef MPI26_PCIE_IOUNIT1_PHY_MAX
> +#define MPI26_PCIE_IOUNIT1_PHY_MAX      (1)
> +#endif
> +
> +typedef struct _MPI26_CONFIG_PAGE_PIOUNIT_1 {
> +	MPI2_CONFIG_EXTENDED_PAGE_HEADER
> +		Header;                             /*0x00 */
> +	U16
> +		ControlFlags;                       /*0x08 */
> +	U16
> +		Reserved;                           /*0x0A */
> +	U16
> +		AdditionalControlFlags;             /*0x0C */
> +	U16
> +		NVMeMaxQueueDepth;                  /*0x0E */
> +	U8
> +		NumPhys;                            /*0x10 */
> +	U8
> +		Reserved1;                          /*0x11 */
> +	U16
> +		Reserved2;                          /*0x12 */
> +	MPI26_PCIE_IO_UNIT1_PHY_DATA
> +		PhyData[MPI26_PCIE_IOUNIT1_PHY_MAX];/*0x14 */
> +} MPI26_CONFIG_PAGE_PIOUNIT_1,
> +	*PTR_MPI26_CONFIG_PAGE_PIOUNIT_1,
> +	Mpi26PCIeIOUnitPage1_t, *pMpi26PCIeIOUnitPage1_t;
> +
> +#define MPI26_PCIEIOUNITPAGE1_PAGEVERSION   (0x00)
> +
> +/*values for PCIe IO Unit Page 1 PhyFlags */
> +#define MPI26_PCIEIOUNIT1_PHYFLAGS_PHY_DISABLE                      (0x08)
> +#define MPI26_PCIEIOUNIT1_PHYFLAGS_ENDPOINT_ONLY                    (0x01)
> +
> +/*values for PCIe IO Unit Page 1 MaxMinLinkRate */
> +#define MPI26_PCIEIOUNIT1_MAX_RATE_MASK                             (0xF0)
> +#define MPI26_PCIEIOUNIT1_MAX_RATE_SHIFT                            (4)
> +#define MPI26_PCIEIOUNIT1_MAX_RATE_2_5                              (0x20)
> +#define MPI26_PCIEIOUNIT1_MAX_RATE_5_0                              (0x30)
> +#define MPI26_PCIEIOUNIT1_MAX_RATE_8_0                              (0x40)
> +#define MPI26_PCIEIOUNIT1_MAX_RATE_16_0                             (0x50)
> +
> +/*see mpi2_pci.h for values for PCIe IO Unit Page 0 ControllerPhyDeviceInfo
> + *values
> + */
> +
> +
> +/****************************************************************************
> +*  PCIe Switch Config Pages (MPI v2.6 and later)
> +****************************************************************************/
> +
> +/*PCIe Switch Page 0 */
> +
> +typedef struct _MPI26_CONFIG_PAGE_PSWITCH_0 {
> +	MPI2_CONFIG_EXTENDED_PAGE_HEADER
> +		Header;                     /*0x00 */
> +	U8
> +		PhysicalPort;               /*0x08 */
> +	U8
> +		Reserved1;                  /*0x09 */
> +	U16
> +		Reserved2;                  /*0x0A */
> +	U16
> +		DevHandle;                  /*0x0C */
> +	U16
> +		ParentDevHandle;            /*0x0E */
> +	U8
> +		NumPorts;                   /*0x10 */
> +	U8
> +		PCIeLevel;                  /*0x11 */
> +	U16
> +		Reserved3;                  /*0x12 */
> +	U32
> +		Reserved4;                  /*0x14 */
> +	U32
> +		Reserved5;                  /*0x18 */
> +	U32
> +		Reserved6;                  /*0x1C */
> +} MPI26_CONFIG_PAGE_PSWITCH_0, *PTR_MPI26_CONFIG_PAGE_PSWITCH_0,
> +	Mpi26PCIeSwitchPage0_t, *pMpi26PCIeSwitchPage0_t;
> +
> +#define MPI26_PCIESWITCH0_PAGEVERSION       (0x00)
> +
> +
> +/*PCIe Switch Page 1 */
> +
> +typedef struct _MPI26_CONFIG_PAGE_PSWITCH_1 {
> +	MPI2_CONFIG_EXTENDED_PAGE_HEADER
> +		Header;                     /*0x00 */
> +	U8
> +		PhysicalPort;               /*0x08 */
> +	U8
> +		Reserved1;                  /*0x09 */
> +	U16
> +		Reserved2;                  /*0x0A */
> +	U8
> +		NumPorts;                   /*0x0C */
> +	U8
> +		PortNum;                    /*0x0D */
> +	U16
> +		AttachedDevHandle;          /*0x0E */
> +	U16
> +		SwitchDevHandle;            /*0x10 */
> +	U8
> +		NegotiatedPortWidth;        /*0x12 */
> +	U8
> +		NegotiatedLinkRate;         /*0x13 */
> +	U32
> +		Reserved4;                  /*0x14 */
> +	U32
> +		Reserved5;                  /*0x18 */
> +} MPI26_CONFIG_PAGE_PSWITCH_1, *PTR_MPI26_CONFIG_PAGE_PSWITCH_1,
> +	Mpi26PCIeSwitchPage1_t, *pMpi26PCIeSwitchPage1_t;
> +
> +#define MPI26_PCIESWITCH1_PAGEVERSION       (0x00)
> +
> +/*use MPI26_PCIE_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */
> +
> +
> +/****************************************************************************
> +*  PCIe Device Config Pages (MPI v2.6 and later)
> +****************************************************************************/
> +
> +/*PCIe Device Page 0 */
> +
> +typedef struct _MPI26_CONFIG_PAGE_PCIEDEV_0 {
> +	MPI2_CONFIG_EXTENDED_PAGE_HEADER
> +		Header;                 /*0x00 */
> +	U16
> +		Slot;                   /*0x08 */
> +	U16
> +		EnclosureHandle;        /*0x0A */
> +	U64
> +		WWID;                   /*0x0C */
> +	U16
> +		ParentDevHandle;        /*0x14 */
> +	U8
> +		PortNum;                /*0x16 */
> +	U8
> +		AccessStatus;           /*0x17 */
> +	U16
> +		DevHandle;              /*0x18 */
> +	U8
> +		PhysicalPort;           /*0x1A */
> +	U8
> +		Reserved1;              /*0x1B */
> +	U32
> +		DeviceInfo;             /*0x1C */
> +	U32
> +		Flags;                  /*0x20 */
> +	U8
> +		SupportedLinkRates;     /*0x24 */
> +	U8
> +		MaxPortWidth;           /*0x25 */
> +	U8
> +		NegotiatedPortWidth;    /*0x26 */
> +	U8
> +		NegotiatedLinkRate;     /*0x27 */
> +	U8
> +		EnclosureLevel;         /*0x28 */
> +	U8
> +		Reserved2;              /*0x29 */
> +	U16
> +		Reserved3;              /*0x2A */
> +	U8
> +		ConnectorName[4];       /*0x2C */
> +	U32
> +		Reserved4;              /*0x30 */
> +	U32
> +		Reserved5;              /*0x34 */
> +} MPI26_CONFIG_PAGE_PCIEDEV_0, *PTR_MPI26_CONFIG_PAGE_PCIEDEV_0,
> +	Mpi26PCIeDevicePage0_t, *pMpi26PCIeDevicePage0_t;
> +
> +#define MPI26_PCIEDEVICE0_PAGEVERSION       (0x01)
> +
> +/*values for PCIe Device Page 0 AccessStatus field */
> +#define MPI26_PCIEDEV0_ASTATUS_NO_ERRORS                    (0x00)
> +#define MPI26_PCIEDEV0_ASTATUS_NEEDS_INITIALIZATION         (0x04)
> +#define MPI26_PCIEDEV0_ASTATUS_CAPABILITY_FAILED            (0x02)
> +#define MPI26_PCIEDEV0_ASTATUS_DEVICE_BLOCKED               (0x07)
> +#define MPI26_PCIEDEV0_ASTATUS_MEMORY_SPACE_ACCESS_FAILED   (0x08)
> +#define MPI26_PCIEDEV0_ASTATUS_UNSUPPORTED_DEVICE           (0x09)
> +#define MPI26_PCIEDEV0_ASTATUS_MSIX_REQUIRED                (0x0A)
> +#define MPI26_PCIEDEV0_ASTATUS_UNKNOWN                      (0x10)
> +
> +#define MPI26_PCIEDEV0_ASTATUS_NVME_READY_TIMEOUT           (0x30)
> +#define MPI26_PCIEDEV0_ASTATUS_NVME_DEVCFG_UNSUPPORTED      (0x31)
> +#define MPI26_PCIEDEV0_ASTATUS_NVME_IDENTIFY_FAILED         (0x32)
> +#define MPI26_PCIEDEV0_ASTATUS_NVME_QCONFIG_FAILED          (0x33)
> +#define MPI26_PCIEDEV0_ASTATUS_NVME_QCREATION_FAILED        (0x34)
> +#define MPI26_PCIEDEV0_ASTATUS_NVME_EVENTCFG_FAILED         (0x35)
> +#define MPI26_PCIEDEV0_ASTATUS_NVME_GET_FEATURE_STAT_FAILED (0x36)
> +#define MPI26_PCIEDEV0_ASTATUS_NVME_IDLE_TIMEOUT            (0x37)
> +#define MPI26_PCIEDEV0_ASTATUS_NVME_FAILURE_STATUS          (0x38)
> +
> +#define MPI26_PCIEDEV0_ASTATUS_INIT_FAIL_MAX                (0x3F)
> +
> +/*see mpi2_pci.h for the MPI26_PCIE_DEVINFO_ defines used for the DeviceInfo
> + *field
> + */
> +
> +/*values for PCIe Device Page 0 Flags field */
> +#define MPI26_PCIEDEV0_FLAGS_UNAUTHORIZED_DEVICE            (0x8000)
> +#define MPI26_PCIEDEV0_FLAGS_ENABLED_FAST_PATH              (0x4000)
> +#define MPI26_PCIEDEV0_FLAGS_FAST_PATH_CAPABLE              (0x2000)
> +#define MPI26_PCIEDEV0_FLAGS_ASYNCHRONOUS_NOTIFICATION      (0x0400)
> +#define MPI26_PCIEDEV0_FLAGS_ATA_SW_PRESERVATION            (0x0200)
> +#define MPI26_PCIEDEV0_FLAGS_UNSUPPORTED_DEVICE             (0x0100)
> +#define MPI26_PCIEDEV0_FLAGS_ATA_48BIT_LBA_SUPPORTED        (0x0080)
> +#define MPI26_PCIEDEV0_FLAGS_ATA_SMART_SUPPORTED            (0x0040)
> +#define MPI26_PCIEDEV0_FLAGS_ATA_NCQ_SUPPORTED              (0x0020)
> +#define MPI26_PCIEDEV0_FLAGS_ATA_FUA_SUPPORTED              (0x0010)
> +#define MPI26_PCIEDEV0_FLAGS_ENCL_LEVEL_VALID               (0x0002)
> +#define MPI26_PCIEDEV0_FLAGS_DEVICE_PRESENT                 (0x0001)
> +
> +/* values for PCIe Device Page 0 SupportedLinkRates field */
> +#define MPI26_PCIEDEV0_LINK_RATE_16_0_SUPPORTED             (0x08)
> +#define MPI26_PCIEDEV0_LINK_RATE_8_0_SUPPORTED              (0x04)
> +#define MPI26_PCIEDEV0_LINK_RATE_5_0_SUPPORTED              (0x02)
> +#define MPI26_PCIEDEV0_LINK_RATE_2_5_SUPPORTED              (0x01)
> +
> +/*use MPI26_PCIE_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */
> +
> +
> +/*PCIe Device Page 2 */
> +
> +typedef struct _MPI26_CONFIG_PAGE_PCIEDEV_2 {
> +	MPI2_CONFIG_EXTENDED_PAGE_HEADER
> +		Header;                 /*0x00 */
> +	U16
> +		DevHandle;              /*0x08 */
> +	U16
> +		Reserved1;              /*0x0A */
> +	U32
> +		MaximumDataTransferSize;/*0x0C */
> +	U32
> +		Capabilities;           /*0x10 */
> +	U32
> +		Reserved2;              /*0x14 */
> +} MPI26_CONFIG_PAGE_PCIEDEV_2, *PTR_MPI26_CONFIG_PAGE_PCIEDEV_2,
> +	Mpi26PCIeDevicePage2_t, *pMpi26PCIeDevicePage2_t;
> +
> +#define MPI26_PCIEDEVICE2_PAGEVERSION       (0x00)
> +
> +/*defines for PCIe Device Page 2 Capabilities field */
> +#define MPI26_PCIEDEV2_CAP_SGL_FORMAT                  (0x00000004)
> +#define MPI26_PCIEDEV2_CAP_BIT_BUCKET_SUPPORT          (0x00000002)
> +#define MPI26_PCIEDEV2_CAP_SGL_SUPPORT                 (0x00000001)
> +
> +
> +/****************************************************************************
> +*  PCIe Link Config Pages (MPI v2.6 and later)
> +****************************************************************************/
> +
> +/*PCIe Link Page 1 */
> +
> +typedef struct _MPI26_CONFIG_PAGE_PCIELINK_1 {
> +	MPI2_CONFIG_EXTENDED_PAGE_HEADER
> +		Header;                     /*0x00 */
> +	U8
> +		Link;                       /*0x08 */
> +	U8
> +		Reserved1;                  /*0x09 */
> +	U16
> +		Reserved2;                  /*0x0A */
> +	U32
> +		CorrectableErrorCount;      /*0x0C */
> +	U16
> +		NonFatalErrorCount;         /*0x10 */
> +	U16
> +		Reserved3;                  /*0x12 */
> +	U16
> +		FatalErrorCount;            /*0x14 */
> +	U16
> +		Reserved4;                  /*0x16 */
> +} MPI26_CONFIG_PAGE_PCIELINK_1, *PTR_MPI26_CONFIG_PAGE_PCIELINK_1,
> +	Mpi26PcieLinkPage1_t, *pMpi26PcieLinkPage1_t;
> +
> +#define MPI26_PCIELINK1_PAGEVERSION            (0x00)
> +
> +/*PCIe Link Page 2 */
> +
> +typedef struct _MPI26_PCIELINK2_LINK_EVENT {
> +	U8
> +		LinkEventCode;      /*0x00 */
> +	U8
> +		Reserved1;          /*0x01 */
> +	U16
> +		Reserved2;          /*0x02 */
> +	U32
> +		LinkEventInfo;      /*0x04 */
> +} MPI26_PCIELINK2_LINK_EVENT, *PTR_MPI26_PCIELINK2_LINK_EVENT,
> +	Mpi26PcieLink2LinkEvent_t, *pMpi26PcieLink2LinkEvent_t;
> +
> +/*use MPI26_PCIELINK3_EVTCODE_ for the LinkEventCode field */
> +
> +
> +/*
> + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
> + *one and check the value returned for NumLinkEvents at runtime.
> + */
> +#ifndef MPI26_PCIELINK2_LINK_EVENT_MAX
> +#define MPI26_PCIELINK2_LINK_EVENT_MAX      (1)
> +#endif
> +
> +typedef struct _MPI26_CONFIG_PAGE_PCIELINK_2 {
> +	MPI2_CONFIG_EXTENDED_PAGE_HEADER
> +		Header;                     /*0x00 */
> +	U8
> +		Link;                       /*0x08 */
> +	U8
> +		Reserved1;                  /*0x09 */
> +	U16
> +		Reserved2;                  /*0x0A */
> +	U8
> +		NumLinkEvents;              /*0x0C */
> +	U8
> +		Reserved3;                  /*0x0D */
> +	U16
> +		Reserved4;                  /*0x0E */
> +	MPI26_PCIELINK2_LINK_EVENT
> +		LinkEvent[MPI26_PCIELINK2_LINK_EVENT_MAX]; /*0x10 */
> +} MPI26_CONFIG_PAGE_PCIELINK_2, *PTR_MPI26_CONFIG_PAGE_PCIELINK_2,
> +	Mpi26PcieLinkPage2_t, *pMpi26PcieLinkPage2_t;
> +
> +#define MPI26_PCIELINK2_PAGEVERSION            (0x00)
> +
> +/*PCIe Link Page 3 */
> +
> +typedef struct _MPI26_PCIELINK3_LINK_EVENT_CONFIG {
> +	U8
> +		LinkEventCode;      /*0x00 */
> +	U8
> +		Reserved1;          /*0x01 */
> +	U16
> +		Reserved2;          /*0x02 */
> +	U8
> +		CounterType;        /*0x04 */
> +	U8
> +		ThresholdWindow;    /*0x05 */
> +	U8
> +		TimeUnits;          /*0x06 */
> +	U8
> +		Reserved3;          /*0x07 */
> +	U32
> +		EventThreshold;     /*0x08 */
> +	U16
> +		ThresholdFlags;     /*0x0C */
> +	U16
> +		Reserved4;          /*0x0E */
> +} MPI26_PCIELINK3_LINK_EVENT_CONFIG, *PTR_MPI26_PCIELINK3_LINK_EVENT_CONFIG,
> +	Mpi26PcieLink3LinkEventConfig_t, *pMpi26PcieLink3LinkEventConfig_t;
> +
> +/*values for LinkEventCode field */
> +#define MPI26_PCIELINK3_EVTCODE_NO_EVENT                              (0x00)
> +#define MPI26_PCIELINK3_EVTCODE_CORRECTABLE_ERROR_RECEIVED            (0x01)
> +#define MPI26_PCIELINK3_EVTCODE_NON_FATAL_ERROR_RECEIVED              (0x02)
> +#define MPI26_PCIELINK3_EVTCODE_FATAL_ERROR_RECEIVED                  (0x03)
> +#define MPI26_PCIELINK3_EVTCODE_DATA_LINK_ERROR_DETECTED              (0x04)
> +#define MPI26_PCIELINK3_EVTCODE_TRANSACTION_LAYER_ERROR_DETECTED      (0x05)
> +#define MPI26_PCIELINK3_EVTCODE_TLP_ECRC_ERROR_DETECTED               (0x06)
> +#define MPI26_PCIELINK3_EVTCODE_POISONED_TLP                          (0x07)
> +#define MPI26_PCIELINK3_EVTCODE_RECEIVED_NAK_DLLP                     (0x08)
> +#define MPI26_PCIELINK3_EVTCODE_SENT_NAK_DLLP                         (0x09)
> +#define MPI26_PCIELINK3_EVTCODE_LTSSM_RECOVERY_STATE                  (0x0A)
> +#define MPI26_PCIELINK3_EVTCODE_LTSSM_RXL0S_STATE                     (0x0B)
> +#define MPI26_PCIELINK3_EVTCODE_LTSSM_TXL0S_STATE                     (0x0C)
> +#define MPI26_PCIELINK3_EVTCODE_LTSSM_L1_STATE                        (0x0D)
> +#define MPI26_PCIELINK3_EVTCODE_LTSSM_DISABLED_STATE                  (0x0E)
> +#define MPI26_PCIELINK3_EVTCODE_LTSSM_HOT_RESET_STATE                 (0x0F)
> +#define MPI26_PCIELINK3_EVTCODE_SYSTEM_ERROR                          (0x10)
> +#define MPI26_PCIELINK3_EVTCODE_DECODE_ERROR                          (0x11)
> +#define MPI26_PCIELINK3_EVTCODE_DISPARITY_ERROR                       (0x12)
> +
> +/*values for the CounterType field */
> +#define MPI26_PCIELINK3_COUNTER_TYPE_WRAPPING               (0x00)
> +#define MPI26_PCIELINK3_COUNTER_TYPE_SATURATING             (0x01)
> +#define MPI26_PCIELINK3_COUNTER_TYPE_PEAK_VALUE             (0x02)
> +
> +/*values for the TimeUnits field */
> +#define MPI26_PCIELINK3_TM_UNITS_10_MICROSECONDS            (0x00)
> +#define MPI26_PCIELINK3_TM_UNITS_100_MICROSECONDS           (0x01)
> +#define MPI26_PCIELINK3_TM_UNITS_1_MILLISECOND              (0x02)
> +#define MPI26_PCIELINK3_TM_UNITS_10_MILLISECONDS            (0x03)
> +
> +/*values for the ThresholdFlags field */
> +#define MPI26_PCIELINK3_TFLAGS_EVENT_NOTIFY                 (0x0001)
> +
> +/*
> + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
> + *one and check the value returned for NumLinkEvents at runtime.
> + */
> +#ifndef MPI26_PCIELINK3_LINK_EVENT_MAX
> +#define MPI26_PCIELINK3_LINK_EVENT_MAX      (1)
> +#endif
> +
> +typedef struct _MPI26_CONFIG_PAGE_PCIELINK_3 {
> +	MPI2_CONFIG_EXTENDED_PAGE_HEADER
> +		Header;                     /*0x00 */
> +	U8
> +		Link;                       /*0x08 */
> +	U8
> +		Reserved1;                  /*0x09 */
> +	U16
> +		Reserved2;                  /*0x0A */
> +	U8
> +		NumLinkEvents;              /*0x0C */
> +	U8
> +		Reserved3;                  /*0x0D */
> +	U16
> +		Reserved4;                  /*0x0E */
> +	MPI26_PCIELINK3_LINK_EVENT_CONFIG
> +		LinkEventConfig[MPI26_PCIELINK3_LINK_EVENT_MAX]; /*0x10 */
> +} MPI26_CONFIG_PAGE_PCIELINK_3, *PTR_MPI26_CONFIG_PAGE_PCIELINK_3,
> +	Mpi26PcieLinkPage3_t, *pMpi26PcieLinkPage3_t;
> +
> +#define MPI26_PCIELINK3_PAGEVERSION            (0x00)
> +
> +
>  #endif
> diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_init.h b/drivers/scsi/mpt3sas/mpi/mpi2_init.h
> index bba56b6..7597c24 100644
> --- a/drivers/scsi/mpt3sas/mpi/mpi2_init.h
> +++ b/drivers/scsi/mpt3sas/mpi/mpi2_init.h
> @@ -6,7 +6,7 @@
>   *         Title:  MPI SCSI initiator mode messages and structures
>   * Creation Date:  June 23, 2006
>   *
> - * mpi2_init.h Version:  02.00.20
> + * mpi2_init.h Version:  02.00.21
>   *
>   * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
>   *       prefix are for use only on MPI v2.5 products, and must not be used
> @@ -54,6 +54,8 @@
>   * 08-26-15  02.00.18  Added SCSITASKMGMT_MSGFLAGS for Target Reset.
>   * 12-18-15  02.00.19  Added EEDPObservedValue added to SCSI IO Reply message.
>   * 01-04-16  02.00.20  Modified EEDP reported values in SCSI IO Reply message.
> + * 01-21-16  02.00.21  Modified MPI26_SCSITASKMGMT_MSGFLAGS_PCIE* defines to
> + *                     be unique within first 32 characters.
>   * --------------------------------------------------------------------------
>   */
>  
> @@ -373,6 +375,11 @@ typedef struct _MPI2_SCSI_IO_REPLY {
>  } MPI2_SCSI_IO_REPLY, *PTR_MPI2_SCSI_IO_REPLY,
>  	Mpi2SCSIIOReply_t, *pMpi2SCSIIOReply_t;
>  
> +/*SCSI IO Reply MsgFlags bits */
> +#define MPI26_SCSIIO_REPLY_MSGFLAGS_REFTAG_OBSERVED_VALID     (0x01)
> +#define MPI26_SCSIIO_REPLY_MSGFLAGS_GUARD_OBSERVED_VALID      (0x02)
> +#define MPI26_SCSIIO_REPLY_MSGFLAGS_APPTAG_OBSERVED_VALID     (0x04)
> +
>  /*SCSI IO Reply SCSIStatus values (SAM-4 status codes) */
>  
>  #define MPI2_SCSI_STATUS_GOOD                   (0x00)
> @@ -446,11 +453,13 @@ typedef struct _MPI2_SCSI_TASK_MANAGE_REQUEST {
>  /*MsgFlags bits */
>  
>  #define MPI2_SCSITASKMGMT_MSGFLAGS_MASK_TARGET_RESET    (0x18)
> +#define MPI26_SCSITASKMGMT_MSGFLAGS_HOT_RESET_PCIE        (0x00)
>  #define MPI2_SCSITASKMGMT_MSGFLAGS_LINK_RESET           (0x00)
>  #define MPI2_SCSITASKMGMT_MSGFLAGS_NEXUS_RESET_SRST     (0x08)
>  #define MPI2_SCSITASKMGMT_MSGFLAGS_SAS_HARD_LINK_RESET  (0x10)
>  
>  #define MPI2_SCSITASKMGMT_MSGFLAGS_DO_NOT_SEND_TASK_IU  (0x01)
> +#define MPI26_SCSITASKMGMT_MSGFLAGS_PROTOCOL_LVL_RST_PCIE (0x18)
>  
>  /*SCSI Task Management Reply Message */
>  typedef struct _MPI2_SCSI_TASK_MANAGE_REPLY {
> diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h b/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h
> index af4be40..816ade3 100644
> --- a/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h
> +++ b/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h
> @@ -6,7 +6,7 @@
>   *         Title:  MPI IOC, Port, Event, FW Download, and FW Upload messages
>   * Creation Date:  October 11, 2006
>   *
> - * mpi2_ioc.h Version:  02.00.27
> + * mpi2_ioc.h Version:  02.00.32
>   *
>   * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
>   *       prefix are for use only on MPI v2.5 products, and must not be used
> @@ -140,7 +140,32 @@
>   *                     Added MPI26_FW_HEADER_PID_FAMILY_3324_SAS and
>   *                     MPI26_FW_HEADER_PID_FAMILY_3516_SAS.
>   *                     Added MPI26_CTRL_OP_SHUTDOWN.
> - * 08-25-15  02.00.27  Added IC ARCH Class based signature defines
> + * 08-25-15  02.00.27  Added IC ARCH Class based signature defines.
> + *                     Added MPI26_EVENT_PCIE_ENUM_ES_RESOURCES_EXHAUSTED event.
> + *                     Added ConigurationFlags field to IOCInit message to
> + *                     support NVMe SGL format control.
> + *                     Added PCIe SRIOV support.
> + * 02-17-16   02.00.28 Added SAS 4 22.5 gbs speed support.
> + *                     Added PCIe 4 16.0 GT/sec speec support.
> + *                     Removed AHCI support.
> + *                     Removed SOP support.
> + * 07-01-16   02.00.29 Added Archclass for 4008 product.
> + *                     Added IOCException MPI2_IOCFACTS_EXCEPT_PCIE_DISABLED
> + * 08-23-16   02.00.30 Added new defines for the ImageType field of FWDownload
> + *                     Request Message.
> + *                     Added new defines for the ImageType field of FWUpload
> + *                     Request Message.
> + *                     Added new values for the RegionType field in the Layout
> + *                     Data sections of the FLASH Layout Extended Image Data.
> + *                     Added new defines for the ReasonCode field of
> + *                     Active Cable Exception Event.
> + *                     Added MPI2_EVENT_ENCL_DEVICE_STATUS_CHANGE and
> + *                     MPI26_EVENT_DATA_ENCL_DEV_STATUS_CHANGE.
> + * 11-23-16   02.00.31 Added MPI2_EVENT_SAS_DEVICE_DISCOVERY_ERROR and
> + *                     MPI25_EVENT_DATA_SAS_DEVICE_DISCOVERY_ERROR.
> + * 02-02-17   02.00.32 Added MPI2_FW_DOWNLOAD_ITYPE_CBB_BACKUP.
> + *                     Added MPI25_EVENT_DATA_ACTIVE_CABLE_EXCEPT and related
> + *                     defines for the ReasonCode field.
>   * --------------------------------------------------------------------------
>   */
>  
> @@ -212,6 +237,9 @@ typedef struct _MPI2_IOC_INIT_REQUEST {
>  #define MPI2_IOCINIT_HDRVERSION_DEV_MASK        (0x00FF)
>  #define MPI2_IOCINIT_HDRVERSION_DEV_SHIFT       (0)
>  
> +/*ConfigurationFlags */
> +#define MPI26_IOCINIT_CFGFLAGS_NVME_SGL_FORMAT  (0x0001)
> +
>  /*minimum depth for a Reply Descriptor Post Queue */
>  #define MPI2_RDPQ_DEPTH_MIN                     (16)
>  
> @@ -299,6 +327,10 @@ typedef struct _MPI2_IOC_FACTS_REPLY {
>  	U16 MinDevHandle;	/*0x3C */
>  	U8 CurrentHostPageSize;	/* 0x3E */
>  	U8 Reserved4;		/* 0x3F */
> +	U8 SGEModifierMask;	/*0x40 */
> +	U8 SGEModifierValue;	/*0x41 */
> +	U8 SGEModifierShift;	/*0x42 */
> +	U8 Reserved5;		/*0x43 */
>  } MPI2_IOC_FACTS_REPLY, *PTR_MPI2_IOC_FACTS_REPLY,
>  	Mpi2IOCFactsReply_t, *pMpi2IOCFactsReply_t;
>  
> @@ -315,6 +347,7 @@ typedef struct _MPI2_IOC_FACTS_REPLY {
>  #define MPI2_IOCFACTS_HDRVERSION_DEV_SHIFT              (0)
>  
>  /*IOCExceptions */
> +#define MPI2_IOCFACTS_EXCEPT_PCIE_DISABLED              (0x0400)
>  #define MPI2_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE     (0x0200)
>  #define MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX      (0x0100)
>  
> @@ -335,6 +368,7 @@ typedef struct _MPI2_IOC_FACTS_REPLY {
>  /*ProductID field uses MPI2_FW_HEADER_PID_ */
>  
>  /*IOCCapabilities */
> +#define MPI26_IOCFACTS_CAPABILITY_PCIE_SRIOV            (0x00100000)
>  #define MPI26_IOCFACTS_CAPABILITY_ATOMIC_REQ            (0x00080000)
>  #define MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE     (0x00040000)
>  #define MPI25_IOCFACTS_CAPABILITY_FAST_PATH_CAPABLE     (0x00020000)
> @@ -353,6 +387,7 @@ typedef struct _MPI2_IOC_FACTS_REPLY {
>  #define MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING (0x00000004)
>  
>  /*ProtocolFlags */
> +#define MPI2_IOCFACTS_PROTOCOL_NVME_DEVICES             (0x0008)
>  #define MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR           (0x0002)
>  #define MPI2_IOCFACTS_PROTOCOL_SCSI_TARGET              (0x0001)
>  
> @@ -402,6 +437,8 @@ typedef struct _MPI2_PORT_FACTS_REPLY {
>  #define MPI2_PORTFACTS_PORTTYPE_ISCSI               (0x20)
>  #define MPI2_PORTFACTS_PORTTYPE_SAS_PHYSICAL        (0x30)
>  #define MPI2_PORTFACTS_PORTTYPE_SAS_VIRTUAL         (0x31)
> +#define MPI2_PORTFACTS_PORTTYPE_TRI_MODE            (0x40)
> +
>  
>  /****************************************************************************
>  * PortEnable message
> @@ -508,6 +545,7 @@ typedef struct _MPI2_EVENT_NOTIFICATION_REPLY {
>  #define MPI2_EVENT_SAS_INIT_TABLE_OVERFLOW          (0x0019)
>  #define MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST         (0x001C)
>  #define MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE    (0x001D)
> +#define MPI2_EVENT_ENCL_DEVICE_STATUS_CHANGE        (0x001D)
>  #define MPI2_EVENT_IR_VOLUME                        (0x001E)
>  #define MPI2_EVENT_IR_PHYSICAL_DISK                 (0x001F)
>  #define MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST     (0x0020)
> @@ -520,7 +558,12 @@ typedef struct _MPI2_EVENT_NOTIFICATION_REPLY {
>  #define MPI2_EVENT_TEMP_THRESHOLD                   (0x0027)
>  #define MPI2_EVENT_HOST_MESSAGE                     (0x0028)
>  #define MPI2_EVENT_POWER_PERFORMANCE_CHANGE         (0x0029)
> +#define MPI2_EVENT_PCIE_DEVICE_STATUS_CHANGE        (0x0030)
> +#define MPI2_EVENT_PCIE_ENUMERATION                 (0x0031)
> +#define MPI2_EVENT_PCIE_TOPOLOGY_CHANGE_LIST        (0x0032)
> +#define MPI2_EVENT_PCIE_LINK_COUNTER                (0x0033)
>  #define MPI2_EVENT_ACTIVE_CABLE_EXCEPTION           (0x0034)
> +#define MPI2_EVENT_SAS_DEVICE_DISCOVERY_ERROR       (0x0035)
>  #define MPI2_EVENT_MIN_PRODUCT_SPECIFIC             (0x006E)
>  #define MPI2_EVENT_MAX_PRODUCT_SPECIFIC             (0x007F)
>  
> @@ -617,11 +660,20 @@ typedef struct _MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT {
>  	U8          ReasonCode;                         /* 0x04 */
>  	U8          ReceptacleID;                       /* 0x05 */
>  	U16         Reserved1;                          /* 0x06 */
> -} MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT,
> +} MPI25_EVENT_DATA_ACTIVE_CABLE_EXCEPT,
> +	*PTR_MPI25_EVENT_DATA_ACTIVE_CABLE_EXCEPT,
> +	Mpi25EventDataActiveCableExcept_t,
> +	*pMpi25EventDataActiveCableExcept_t,
> +	MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT,
>  	*PTR_MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT,
>  	Mpi26EventDataActiveCableExcept_t,
>  	*pMpi26EventDataActiveCableExcept_t;
>  
> +/*MPI2.5 defines for the ReasonCode field */
> +#define MPI25_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER     (0x00)
> +#define MPI25_EVENT_ACTIVE_CABLE_PRESENT                (0x01)
> +#define MPI25_EVENT_ACTIVE_CABLE_DEGRADED               (0x02)
> +
>  /* defines for ReasonCode field */
>  #define MPI26_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER     (0x00)
>  #define MPI26_EVENT_ACTIVE_CABLE_PRESENT                (0x01)
> @@ -957,6 +1009,7 @@ typedef struct _MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST {
>  #define MPI2_EVENT_SAS_TOPO_LR_RATE_3_0                     (0x09)
>  #define MPI2_EVENT_SAS_TOPO_LR_RATE_6_0                     (0x0A)
>  #define MPI25_EVENT_SAS_TOPO_LR_RATE_12_0                   (0x0B)
> +#define MPI26_EVENT_SAS_TOPO_LR_RATE_22_5                   (0x0C)
>  
>  /*values for the PhyStatus field */
>  #define MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT                (0x80)
> @@ -982,12 +1035,43 @@ typedef struct _MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE {
>  } MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE,
>  	*PTR_MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE,
>  	Mpi2EventDataSasEnclDevStatusChange_t,
> -	*pMpi2EventDataSasEnclDevStatusChange_t;
> +	*pMpi2EventDataSasEnclDevStatusChange_t,
> +	MPI26_EVENT_DATA_ENCL_DEV_STATUS_CHANGE,
> +	*PTR_MPI26_EVENT_DATA_ENCL_DEV_STATUS_CHANGE,
> +	Mpi26EventDataEnclDevStatusChange_t,
> +	*pMpi26EventDataEnclDevStatusChange_t;
>  
>  /*SAS Enclosure Device Status Change event ReasonCode values */
>  #define MPI2_EVENT_SAS_ENCL_RC_ADDED                (0x01)
>  #define MPI2_EVENT_SAS_ENCL_RC_NOT_RESPONDING       (0x02)
>  
> +/*Enclosure Device Status Change event ReasonCode values */
> +#define MPI26_EVENT_ENCL_RC_ADDED                   (0x01)
> +#define MPI26_EVENT_ENCL_RC_NOT_RESPONDING          (0x02)
> +
> +
> +typedef struct _MPI25_EVENT_DATA_SAS_DEVICE_DISCOVERY_ERROR {
> +	U16
> +		DevHandle;                  /*0x00 */
> +	U8
> +		ReasonCode;                 /*0x02 */
> +	U8
> +		PhysicalPort;               /*0x03 */
> +	U32
> +		Reserved1[2];               /*0x04 */
> +	U64
> +		SASAddress;                 /*0x0C */
> +	U32
> +		Reserved2[2];               /*0x14 */
> +} MPI25_EVENT_DATA_SAS_DEVICE_DISCOVERY_ERROR,
> +	*PTR_MPI25_EVENT_DATA_SAS_DEVICE_DISCOVERY_ERROR,
> +	Mpi25EventDataSasDeviceDiscoveryError_t,
> +	*pMpi25EventDataSasDeviceDiscoveryError_t;
> +
> +/*SAS Device Discovery Error Event data ReasonCode values */
> +#define MPI25_EVENT_SAS_DISC_ERR_SMP_FAILED         (0x01)
> +#define MPI25_EVENT_SAS_DISC_ERR_SMP_TIMEOUT        (0x02)
> +
>  /*SAS PHY Counter Event data */
>  
>  typedef struct _MPI2_EVENT_DATA_SAS_PHY_COUNTER {
> @@ -1073,6 +1157,217 @@ typedef struct _MPI2_EVENT_DATA_HBD_PHY {
>  /*values for the DescriptorType field */
>  #define MPI2_EVENT_HBD_DT_SAS               (0x01)
>  
> +
> +/*PCIe Device Status Change Event data (MPI v2.6 and later) */
> +
> +typedef struct _MPI26_EVENT_DATA_PCIE_DEVICE_STATUS_CHANGE {
> +	U16
> +		TaskTag;                        /*0x00 */
> +	U8
> +		ReasonCode;                     /*0x02 */
> +	U8
> +		PhysicalPort;                   /*0x03 */
> +	U8
> +		ASC;                            /*0x04 */
> +	U8
> +		ASCQ;                           /*0x05 */
> +	U16
> +		DevHandle;                      /*0x06 */
> +	U32
> +		Reserved2;                      /*0x08 */
> +	U64
> +		WWID;                           /*0x0C */
> +	U8
> +		LUN[8];                         /*0x14 */
> +} MPI26_EVENT_DATA_PCIE_DEVICE_STATUS_CHANGE,
> +	*PTR_MPI26_EVENT_DATA_PCIE_DEVICE_STATUS_CHANGE,
> +	Mpi26EventDataPCIeDeviceStatusChange_t,
> +	*pMpi26EventDataPCIeDeviceStatusChange_t;
> +
> +/*PCIe Device Status Change Event data ReasonCode values */
> +#define MPI26_EVENT_PCIDEV_STAT_RC_SMART_DATA                           (0x05)
> +#define MPI26_EVENT_PCIDEV_STAT_RC_UNSUPPORTED                          (0x07)
> +#define MPI26_EVENT_PCIDEV_STAT_RC_INTERNAL_DEVICE_RESET                (0x08)
> +#define MPI26_EVENT_PCIDEV_STAT_RC_TASK_ABORT_INTERNAL                  (0x09)
> +#define MPI26_EVENT_PCIDEV_STAT_RC_ABORT_TASK_SET_INTERNAL              (0x0A)
> +#define MPI26_EVENT_PCIDEV_STAT_RC_CLEAR_TASK_SET_INTERNAL              (0x0B)
> +#define MPI26_EVENT_PCIDEV_STAT_RC_QUERY_TASK_INTERNAL                  (0x0C)
> +#define MPI26_EVENT_PCIDEV_STAT_RC_ASYNC_NOTIFICATION                   (0x0D)
> +#define MPI26_EVENT_PCIDEV_STAT_RC_CMP_INTERNAL_DEV_RESET               (0x0E)
> +#define MPI26_EVENT_PCIDEV_STAT_RC_CMP_TASK_ABORT_INTERNAL              (0x0F)
> +#define MPI26_EVENT_PCIDEV_STAT_RC_DEV_INIT_FAILURE                     (0x10)
> +
> +
> +/*PCIe Enumeration Event data (MPI v2.6 and later) */
> +
> +typedef struct _MPI26_EVENT_DATA_PCIE_ENUMERATION {
> +	U8
> +		Flags;                      /*0x00 */
> +	U8
> +		ReasonCode;                 /*0x01 */
> +	U8
> +		PhysicalPort;               /*0x02 */
> +	U8
> +		Reserved1;                  /*0x03 */
> +	U32
> +		EnumerationStatus;          /*0x04 */
> +} MPI26_EVENT_DATA_PCIE_ENUMERATION,
> +	*PTR_MPI26_EVENT_DATA_PCIE_ENUMERATION,
> +	Mpi26EventDataPCIeEnumeration_t,
> +	*pMpi26EventDataPCIeEnumeration_t;
> +
> +/*PCIe Enumeration Event data Flags values */
> +#define MPI26_EVENT_PCIE_ENUM_DEVICE_CHANGE                 (0x02)
> +#define MPI26_EVENT_PCIE_ENUM_IN_PROGRESS                   (0x01)
> +
> +/*PCIe Enumeration Event data ReasonCode values */
> +#define MPI26_EVENT_PCIE_ENUM_RC_STARTED                    (0x01)
> +#define MPI26_EVENT_PCIE_ENUM_RC_COMPLETED                  (0x02)
> +
> +/*PCIe Enumeration Event data EnumerationStatus values */
> +#define MPI26_EVENT_PCIE_ENUM_ES_MAX_SWITCHES_EXCEED            (0x40000000)
> +#define MPI26_EVENT_PCIE_ENUM_ES_MAX_DEVICES_EXCEED             (0x20000000)
> +#define MPI26_EVENT_PCIE_ENUM_ES_RESOURCES_EXHAUSTED            (0x10000000)
> +
> +
> +/*PCIe Topology Change List Event data (MPI v2.6 and later) */
> +
> +/*
> + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
> + *one and check NumEntries at runtime.
> + */
> +#ifndef MPI26_EVENT_PCIE_TOPO_PORT_COUNT
> +#define MPI26_EVENT_PCIE_TOPO_PORT_COUNT        (1)
> +#endif
> +
> +typedef struct _MPI26_EVENT_PCIE_TOPO_PORT_ENTRY {
> +	U16
> +		AttachedDevHandle;      /*0x00 */
> +	U8
> +		PortStatus;             /*0x02 */
> +	U8
> +		Reserved1;              /*0x03 */
> +	U8
> +		CurrentPortInfo;        /*0x04 */
> +	U8
> +		Reserved2;              /*0x05 */
> +	U8
> +		PreviousPortInfo;       /*0x06 */
> +	U8
> +		Reserved3;              /*0x07 */
> +} MPI26_EVENT_PCIE_TOPO_PORT_ENTRY,
> +	*PTR_MPI26_EVENT_PCIE_TOPO_PORT_ENTRY,
> +	Mpi26EventPCIeTopoPortEntry_t,
> +	*pMpi26EventPCIeTopoPortEntry_t;
> +
> +/*PCIe Topology Change List Event data PortStatus values */
> +#define MPI26_EVENT_PCIE_TOPO_PS_DEV_ADDED                  (0x01)
> +#define MPI26_EVENT_PCIE_TOPO_PS_NOT_RESPONDING             (0x02)
> +#define MPI26_EVENT_PCIE_TOPO_PS_PORT_CHANGED               (0x03)
> +#define MPI26_EVENT_PCIE_TOPO_PS_NO_CHANGE                  (0x04)
> +#define MPI26_EVENT_PCIE_TOPO_PS_DELAY_NOT_RESPONDING       (0x05)
> +
> +/*PCIe Topology Change List Event data defines for CurrentPortInfo and
> + *PreviousPortInfo
> + */
> +#define MPI26_EVENT_PCIE_TOPO_PI_LANE_MASK                  (0xF0)
> +#define MPI26_EVENT_PCIE_TOPO_PI_LANES_UNKNOWN              (0x00)
> +#define MPI26_EVENT_PCIE_TOPO_PI_1_LANE                     (0x10)
> +#define MPI26_EVENT_PCIE_TOPO_PI_2_LANES                    (0x20)
> +#define MPI26_EVENT_PCIE_TOPO_PI_4_LANES                    (0x30)
> +#define MPI26_EVENT_PCIE_TOPO_PI_8_LANES                    (0x40)
> +
> +#define MPI26_EVENT_PCIE_TOPO_PI_RATE_MASK                  (0x0F)
> +#define MPI26_EVENT_PCIE_TOPO_PI_RATE_UNKNOWN               (0x00)
> +#define MPI26_EVENT_PCIE_TOPO_PI_RATE_DISABLED              (0x01)
> +#define MPI26_EVENT_PCIE_TOPO_PI_RATE_2_5                   (0x02)
> +#define MPI26_EVENT_PCIE_TOPO_PI_RATE_5_0                   (0x03)
> +#define MPI26_EVENT_PCIE_TOPO_PI_RATE_8_0                   (0x04)
> +#define MPI26_EVENT_PCIE_TOPO_PI_RATE_16_0                  (0x05)
> +
> +typedef struct _MPI26_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST {
> +	U16
> +		EnclosureHandle;        /*0x00 */
> +	U16
> +		SwitchDevHandle;        /*0x02 */
> +	U8
> +		NumPorts;               /*0x04 */
> +	U8
> +		Reserved1;              /*0x05 */
> +	U16
> +		Reserved2;              /*0x06 */
> +	U8
> +		NumEntries;             /*0x08 */
> +	U8
> +		StartPortNum;           /*0x09 */
> +	U8
> +		SwitchStatus;           /*0x0A */
> +	U8
> +		PhysicalPort;           /*0x0B */
> +	MPI26_EVENT_PCIE_TOPO_PORT_ENTRY
> +		PortEntry[MPI26_EVENT_PCIE_TOPO_PORT_COUNT]; /*0x0C */
> +} MPI26_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST,
> +	*PTR_MPI26_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST,
> +	Mpi26EventDataPCIeTopologyChangeList_t,
> +	*pMpi26EventDataPCIeTopologyChangeList_t;
> +
> +/*PCIe Topology Change List Event data SwitchStatus values */
> +#define MPI26_EVENT_PCIE_TOPO_SS_NO_PCIE_SWITCH             (0x00)
> +#define MPI26_EVENT_PCIE_TOPO_SS_ADDED                      (0x01)
> +#define MPI26_EVENT_PCIE_TOPO_SS_NOT_RESPONDING             (0x02)
> +#define MPI26_EVENT_PCIE_TOPO_SS_RESPONDING                 (0x03)
> +#define MPI26_EVENT_PCIE_TOPO_SS_DELAY_NOT_RESPONDING       (0x04)
> +
> +/*PCIe Link Counter Event data (MPI v2.6 and later) */
> +
> +typedef struct _MPI26_EVENT_DATA_PCIE_LINK_COUNTER {
> +	U64
> +		TimeStamp;          /*0x00 */
> +	U32
> +		Reserved1;          /*0x08 */
> +	U8
> +		LinkEventCode;      /*0x0C */
> +	U8
> +		LinkNum;            /*0x0D */
> +	U16
> +		Reserved2;          /*0x0E */
> +	U32
> +		LinkEventInfo;      /*0x10 */
> +	U8
> +		CounterType;        /*0x14 */
> +	U8
> +		ThresholdWindow;    /*0x15 */
> +	U8
> +		TimeUnits;          /*0x16 */
> +	U8
> +		Reserved3;          /*0x17 */
> +	U32
> +		EventThreshold;     /*0x18 */
> +	U16
> +		ThresholdFlags;     /*0x1C */
> +	U16
> +		Reserved4;          /*0x1E */
> +} MPI26_EVENT_DATA_PCIE_LINK_COUNTER,
> +	*PTR_MPI26_EVENT_DATA_PCIE_LINK_COUNTER,
> +	Mpi26EventDataPcieLinkCounter_t, *pMpi26EventDataPcieLinkCounter_t;
> +
> +
> +/*use MPI26_PCIELINK3_EVTCODE_ values from mpi2_cnfg.h for the LinkEventCode
> + *field
> + */
> +
> +/*use MPI26_PCIELINK3_COUNTER_TYPE_ values from mpi2_cnfg.h for the CounterType
> + *field
> + */
> +
> +/*use MPI26_PCIELINK3_TIME_UNITS_ values from mpi2_cnfg.h for the TimeUnits
> + *field
> + */
> +
> +/*use MPI26_PCIELINK3_TFLAGS_ values from mpi2_cnfg.h for the ThresholdFlags
> + *field
> + */
> +
>  /****************************************************************************
>  * EventAck message
>  ****************************************************************************/
> @@ -1190,6 +1485,14 @@ typedef struct _MPI2_FW_DOWNLOAD_REQUEST {
>  #define MPI2_FW_DOWNLOAD_ITYPE_COMPLETE             (0x0A)
>  #define MPI2_FW_DOWNLOAD_ITYPE_COMMON_BOOT_BLOCK    (0x0B)
>  #define MPI2_FW_DOWNLOAD_ITYPE_PUBLIC_KEY           (0x0C)
> +#define MPI2_FW_DOWNLOAD_ITYPE_CBB_BACKUP           (0x0D)
> +#define MPI2_FW_DOWNLOAD_ITYPE_SBR                  (0x0E)
> +#define MPI2_FW_DOWNLOAD_ITYPE_SBR_BACKUP           (0x0F)
> +#define MPI2_FW_DOWNLOAD_ITYPE_HIIM                 (0x10)
> +#define MPI2_FW_DOWNLOAD_ITYPE_HIIA                 (0x11)
> +#define MPI2_FW_DOWNLOAD_ITYPE_CTLR                 (0x12)
> +#define MPI2_FW_DOWNLOAD_ITYPE_IMR_FIRMWARE         (0x13)
> +#define MPI2_FW_DOWNLOAD_ITYPE_MR_NVDATA            (0x14)
>  #define MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC (0xF0)
>  
>  /*MPI v2.0 FWDownload TransactionContext Element */
> @@ -1276,6 +1579,14 @@ typedef struct _MPI2_FW_UPLOAD_REQUEST {
>  #define MPI2_FW_UPLOAD_ITYPE_COMPLETE           (0x0A)
>  #define MPI2_FW_UPLOAD_ITYPE_COMMON_BOOT_BLOCK  (0x0B)
>  #define MPI2_FW_UPLOAD_ITYPE_CBB_BACKUP         (0x0D)
> +#define MPI2_FW_UPLOAD_ITYPE_SBR                (0x0E)
> +#define MPI2_FW_UPLOAD_ITYPE_SBR_BACKUP         (0x0F)
> +#define MPI2_FW_UPLOAD_ITYPE_HIIM               (0x10)
> +#define MPI2_FW_UPLOAD_ITYPE_HIIA               (0x11)
> +#define MPI2_FW_UPLOAD_ITYPE_CTLR               (0x12)
> +#define MPI2_FW_UPLOAD_ITYPE_IMR_FIRMWARE       (0x13)
> +#define MPI2_FW_UPLOAD_ITYPE_MR_NVDATA          (0x14)
> +
>  
>  /*MPI v2.0 FWUpload TransactionContext Element */
>  typedef struct _MPI2_FW_UPLOAD_TCSGE {
> @@ -1394,10 +1705,13 @@ typedef struct _MPI2_FW_IMAGE_HEADER {
>  #define MPI26_FW_HEADER_SIGNATURE0_ARC_1        (0x00)
>  #define MPI26_FW_HEADER_SIGNATURE0_ARC_2        (0x01)
>  /* legacy (0x5AEAA55A) */
> +#define MPI26_FW_HEADER_SIGNATURE0_ARC_3        (0x02)
>  #define MPI26_FW_HEADER_SIGNATURE0 \
>  	(MPI26_FW_HEADER_SIGNATURE0_BASE+MPI26_FW_HEADER_SIGNATURE0_ARC_0)
>  #define MPI26_FW_HEADER_SIGNATURE0_3516 \
>  	(MPI26_FW_HEADER_SIGNATURE0_BASE+MPI26_FW_HEADER_SIGNATURE0_ARC_1)
> +#define MPI26_FW_HEADER_SIGNATURE0_4008 \
> +	(MPI26_FW_HEADER_SIGNATURE0_BASE+MPI26_FW_HEADER_SIGNATURE0_ARC_3)
>  
>  /*Signature1 field */
>  #define MPI2_FW_HEADER_SIGNATURE1_OFFSET        (0x08)
> @@ -1541,6 +1855,13 @@ typedef struct _MPI2_FLASH_LAYOUT_DATA {
>  #define MPI2_FLASH_REGION_COMMON_BOOT_BLOCK     (0x0A)
>  #define MPI2_FLASH_REGION_INIT (MPI2_FLASH_REGION_COMMON_BOOT_BLOCK)
>  #define MPI2_FLASH_REGION_CBB_BACKUP            (0x0D)
> +#define MPI2_FLASH_REGION_SBR                   (0x0E)
> +#define MPI2_FLASH_REGION_SBR_BACKUP            (0x0F)
> +#define MPI2_FLASH_REGION_HIIM                  (0x10)
> +#define MPI2_FLASH_REGION_HIIA                  (0x11)
> +#define MPI2_FLASH_REGION_CTLR                  (0x12)
> +#define MPI2_FLASH_REGION_IMR_FIRMWARE          (0x13)
> +#define MPI2_FLASH_REGION_MR_NVDATA             (0x14)
>  
>  /*ImageRevision */
>  #define MPI2_FLASH_LAYOUT_IMAGE_REVISION        (0x00)
> @@ -1825,6 +2146,8 @@ typedef struct _MPI26_IOUNIT_CONTROL_REQUEST {
>  #define MPI26_CTRL_OP_DEV_ENABLE_PERSIST_CONNECTION     (0x17)
>  #define MPI26_CTRL_OP_DEV_DISABLE_PERSIST_CONNECTION    (0x18)
>  #define MPI26_CTRL_OP_DEV_CLOSE_PERSIST_CONNECTION      (0x19)
> +#define MPI26_CTRL_OP_ENABLE_NVME_SGL_FORMAT            (0x1A)
> +#define MPI26_CTRL_OP_DISABLE_NVME_SGL_FORMAT           (0x1B)
>  #define MPI26_CTRL_OP_PRODUCT_SPECIFIC_MIN              (0x80)
>  
>  /* values for the PrimFlags field */
> diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_pci.h b/drivers/scsi/mpt3sas/mpi/mpi2_pci.h
> new file mode 100644
> index 0000000..52ea213
> --- /dev/null
> +++ b/drivers/scsi/mpt3sas/mpi/mpi2_pci.h
> @@ -0,0 +1,142 @@
> +/*
> + * Copyright 2012-2015 Avago Technologies.  All rights reserved.
> + *
> + *
> + *          Name:  mpi2_pci.h
> + *         Title:  MPI PCIe Attached Devices structures and definitions.
> + * Creation Date:  October 9, 2012
> + *
> + * mpi2_pci.h Version:  02.00.02
> + *
> + * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
> + *       prefix are for use only on MPI v2.5 products, and must not be used
> + *       with MPI v2.0 products. Unless otherwise noted, names beginning with
> + *       MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products.
> + *
> + * Version History
> + * ---------------
> + *
> + * Date      Version   Description
> + * --------  --------  ------------------------------------------------------
> + * 03-16-15  02.00.00  Initial version.
> + * 02-17-16  02.00.01  Removed AHCI support.
> + *                     Removed SOP support.
> + * 07-01-16  02.00.02  Added MPI26_NVME_FLAGS_FORCE_ADMIN_ERR_RESP to
> + *                     NVME Encapsulated Request.
> + * --------------------------------------------------------------------------
> + */
> +
> +#ifndef MPI2_PCI_H
> +#define MPI2_PCI_H
> +
> +
> +/*
> + *Values for the PCIe DeviceInfo field used in PCIe Device Status Change Event
> + *data and PCIe Configuration pages.
> + */
> +#define MPI26_PCIE_DEVINFO_DIRECT_ATTACH        (0x00000010)
> +
> +#define MPI26_PCIE_DEVINFO_MASK_DEVICE_TYPE     (0x0000000F)
> +#define MPI26_PCIE_DEVINFO_NO_DEVICE            (0x00000000)
> +#define MPI26_PCIE_DEVINFO_PCI_SWITCH           (0x00000001)
> +#define MPI26_PCIE_DEVINFO_NVME                 (0x00000003)
> +
> +
> +/****************************************************************************
> +*  NVMe Encapsulated message
> +****************************************************************************/
> +
> +/*NVME Encapsulated Request Message */
> +typedef struct _MPI26_NVME_ENCAPSULATED_REQUEST {
> +	U16
> +		DevHandle;                      /*0x00 */
> +	U8
> +		ChainOffset;                    /*0x02 */
> +	U8
> +		Function;                       /*0x03 */
> +	U16
> +		EncapsulatedCommandLength;      /*0x04 */
> +	U8
> +		Reserved1;                      /*0x06 */
> +	U8
> +		MsgFlags;                       /*0x07 */
> +	U8
> +		VP_ID;                          /*0x08 */
> +	U8
> +		VF_ID;                          /*0x09 */
> +	U16
> +		Reserved2;                      /*0x0A */
> +	U32
> +		Reserved3;                      /*0x0C */
> +	U64
> +		ErrorResponseBaseAddress;       /*0x10 */
> +	U16
> +		ErrorResponseAllocationLength;  /*0x18 */
> +	U16
> +		Flags;                          /*0x1A */
> +	U32
> +		DataLength;                     /*0x1C */
> +	U8
> +		NVMe_Command[4];                /*0x20 */
> +
> +} MPI26_NVME_ENCAPSULATED_REQUEST, *PTR_MPI26_NVME_ENCAPSULATED_REQUEST,
> +	Mpi26NVMeEncapsulatedRequest_t, *pMpi26NVMeEncapsulatedRequest_t;
> +
> +/*defines for the Flags field */
> +#define MPI26_NVME_FLAGS_FORCE_ADMIN_ERR_RESP       (0x0020)
> +/*Submission Queue Type*/
> +#define MPI26_NVME_FLAGS_SUBMISSIONQ_MASK           (0x0010)
> +#define MPI26_NVME_FLAGS_SUBMISSIONQ_IO             (0x0000)
> +#define MPI26_NVME_FLAGS_SUBMISSIONQ_ADMIN          (0x0010)
> +/*Error Response Address Space */
> +#define MPI26_NVME_FLAGS_MASK_ERROR_RSP_ADDR        (0x000C)
> +#define MPI26_NVME_FLAGS_SYSTEM_RSP_ADDR            (0x0000)
> +#define MPI26_NVME_FLAGS_IOCPLB_RSP_ADDR            (0x0008)
> +#define MPI26_NVME_FLAGS_IOCPLBNTA_RSP_ADDR         (0x000C)
> +/*Data Direction*/
> +#define MPI26_NVME_FLAGS_DATADIRECTION_MASK         (0x0003)
> +#define MPI26_NVME_FLAGS_NODATATRANSFER             (0x0000)
> +#define MPI26_NVME_FLAGS_WRITE                      (0x0001)
> +#define MPI26_NVME_FLAGS_READ                       (0x0002)
> +#define MPI26_NVME_FLAGS_BIDIRECTIONAL              (0x0003)
> +
> +
> +/*NVMe Encapuslated Reply Message */
> +typedef struct _MPI26_NVME_ENCAPSULATED_ERROR_REPLY {
> +	U16
> +		DevHandle;                      /*0x00 */
> +	U8
> +		MsgLength;                      /*0x02 */
> +	U8
> +		Function;                       /*0x03 */
> +	U16
> +		EncapsulatedCommandLength;      /*0x04 */
> +	U8
> +		Reserved1;                      /*0x06 */
> +	U8
> +		MsgFlags;                       /*0x07 */
> +	U8
> +		VP_ID;                          /*0x08 */
> +	U8
> +		VF_ID;                          /*0x09 */
> +	U16
> +		Reserved2;                      /*0x0A */
> +	U16
> +		Reserved3;                      /*0x0C */
> +	U16
> +		IOCStatus;                      /*0x0E */
> +	U32
> +		IOCLogInfo;                     /*0x10 */
> +	U16
> +		ErrorResponseCount;             /*0x14 */
> +	U16
> +		Reserved4;                      /*0x16 */
> +} MPI26_NVME_ENCAPSULATED_ERROR_REPLY,
> +	*PTR_MPI26_NVME_ENCAPSULATED_ERROR_REPLY,
> +	Mpi26NVMeEncapsulatedErrorReply_t,
> +	*pMpi26NVMeEncapsulatedErrorReply_t;
> +
> +
> +#endif
> +
> +
Very odd indentation.
Please reformat to have type and variable on one line.

Cheers,

Hannes
-- 
Dr. Hannes Reinecke		   Teamlead Storage & Networking
hare at suse.de			               +49 911 74053 688
SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: F. Imendörffer, J. Smithard, J. Guild, D. Upmanyu, G. Norton
HRB 21284 (AG Nürnberg)



More information about the Linux-nvme mailing list