[PATCH v4 0/8] Support for Open-Channel SSDs
Stephen Bates
Stephen.Bates at pmcs.com
Mon Jun 8 07:48:53 PDT 2015
Hi
I have tested this patchset using fio and a simple script that is available at the URL below. Note testing was performed in a QEMU environment and not on real lightnvm block IO devices.
https://github.com/OpenChannelSSD/lightnvm-hw
(see the sanity.sh script in the sanity sub-folder).
Tested-by: Stephen Bates <stephen.bates at pmcs.com>
Cheers
Stephen
-----Original Message-----
From: Matias Bjørling [mailto:m at bjorling.me]
Sent: Friday, June 5, 2015 6:54 AM
To: hch at infradead.org; axboe at fb.com; linux-fsdevel at vger.kernel.org; linux-kernel at vger.kernel.org; linux-nvme at lists.infradead.org
Cc: javier at lightnvm.io; Stephen Bates; keith.busch at intel.com; Matias Bjørling
Subject: [PATCH v4 0/8] Support for Open-Channel SSDs
Hi,
This is an updated version based on the feedback from Christoph.
Patch 1-2 are fixes and preparation for the nvme driver. The first fixes a flag bug. The second allows rq->special in nvme_submit_sync_cmd to be set and used.
Patch 3 fixes capacity reporting in null_blk.
Patch 4-8 introduces LightNVM and a simple target.
Jens, the patches are on top of your for-next tree.
Development and further information on LightNVM can be found at:
https://github.com/OpenChannelSSD/linux
Changes since v3:
- Remove dependence on REQ_NVM_GC
- Refactor nvme integration to use nvme_submit_sync_cmd for
internal commands.
- Fix race condition bug on multiple threads on RRPC target.
- Rename sysfs entry under the block device from nvm to lightnvm.
The configuration is found in /sys/block/*/lightnvm/
Changes since v2:
Feedback from Paul Bolle:
- Fix license to GPLv2, documentation, compilation.
Feedback from Keith Busch:
- nvme: Move lightnvm out and into nvme-lightnvm.c.
- nvme: Set controller css on lightnvm command set.
- nvme: Remove OACS.
Feedback from Christoph Hellwig:
- lightnvm: Move out of block layer into /drivers/lightnvm/core.c
- lightnvm: refactor request->phys_sector into device drivers.
- lightnvm: refactor prep/unprep into device drivers.
- lightnvm: move nvm_dev from request_queue to gendisk.
New
- Bad block table support (From Javier).
- Update maintainers file.
Changes since v1:
- Splitted LightNVM into two parts. A get/put interface for flash
blocks and the respective targets that implement flash translation
layer logic.
- Updated the patches according to the LightNVM specification changes.
- Added interface to add/remove targets for a block device.
Matias Bjørling (8):
nvme: add special param for nvme_submit_sync_cmd
nvme: don't overwrite req->cmd_flags on sync cmd
null_blk: wrong capacity when bs is not 512 bytes
bio: Introduce LightNVM payload
lightnvm: Support for Open-Channel SSDs
lightnvm: RRPC target
null_blk: LightNVM support
nvme: LightNVM support
Documentation/block/null_blk.txt | 8 +
MAINTAINERS | 9 +
drivers/Kconfig | 2 +
drivers/Makefile | 2 +
drivers/block/Makefile | 2 +-
drivers/block/null_blk.c | 136 ++++-
drivers/block/nvme-core.c | 134 ++++-
drivers/block/nvme-lightnvm.c | 320 +++++++++++
drivers/block/nvme-scsi.c | 4 +-
drivers/lightnvm/Kconfig | 26 +
drivers/lightnvm/Makefile | 6 +
drivers/lightnvm/core.c | 833 +++++++++++++++++++++++++++++
drivers/lightnvm/rrpc.c | 1088 ++++++++++++++++++++++++++++++++++++++
drivers/lightnvm/rrpc.h | 221 ++++++++
include/linux/bio.h | 9 +
include/linux/blk_types.h | 4 +-
include/linux/blkdev.h | 2 +
include/linux/genhd.h | 3 +
include/linux/lightnvm.h | 379 +++++++++++++
include/linux/nvme.h | 11 +-
include/uapi/linux/nvme.h | 131 +++++
21 files changed, 3300 insertions(+), 30 deletions(-) create mode 100644 drivers/block/nvme-lightnvm.c create mode 100644 drivers/lightnvm/Kconfig create mode 100644 drivers/lightnvm/Makefile create mode 100644 drivers/lightnvm/core.c create mode 100644 drivers/lightnvm/rrpc.c create mode 100644 drivers/lightnvm/rrpc.h create mode 100644 include/linux/lightnvm.h
--
2.1.4
More information about the Linux-nvme
mailing list