=======================================
   mtd-utils 2.2.0: ./test-suite.log
=======================================

# TOTAL: 2
# PASS:  1
# SKIP:  0
# XFAIL: 0
# FAIL:  1
# XPASS: 0
# ERROR: 0

.. contents:: :depth: 2

FAIL: mtdlib_test
=================

[==========] tests: Running 17 test(s).
[ RUN      ] test_libmtd_open
[       OK ] test_libmtd_open
[ RUN      ] test_mtd_is_bad
[       OK ] test_mtd_is_bad
[ RUN      ] test_mtd_mark_bad
[       OK ] test_mtd_mark_bad
[ RUN      ] test_mtd_lock
[       OK ] test_mtd_lock
[ RUN      ] test_mtd_unlock
[       OK ] test_mtd_unlock
[ RUN      ] test_mtd_is_locked
[       OK ] test_mtd_is_locked
[ RUN      ] test_mtd_regioninfo
[       OK ] test_mtd_regioninfo
[ RUN      ] test_mtd_erase_multi
[       OK ] test_mtd_erase_multi
[ RUN      ] test_mtd_erase
[       OK ] test_mtd_erase
[ RUN      ] test_mtd_read
libmtd: error!: cannot read 28 bytes from mtd0 (eraseblock 224, offset 43)
        error 9 (Bad file descriptor)
[  ERROR   ] --- 0xffffffffffffffff != 0
[   LINE   ] --- tests/unittests/libmtd_test.c:259: error: Failure!
[  FAILED  ] test_mtd_read
[ RUN      ] test_mtd_write_nooob
[       OK ] test_mtd_write_nooob
[ RUN      ] test_mtd_write_withoob
[       OK ] test_mtd_write_withoob
[ RUN      ] test_mtd_read_oob
[       OK ] test_mtd_read_oob
[ RUN      ] test_mtd_write_oob
[       OK ] test_mtd_write_oob
[ RUN      ] test_mtd_dev_present
[       OK ] test_mtd_dev_present
[ RUN      ] test_mtd_get_info
[       OK ] test_mtd_get_info
[ RUN      ] test_mtd_get_dev_info1
[       OK ] test_mtd_get_dev_info1
[==========] tests: 17 test(s) run.
[  PASSED  ] 16 test(s).
[  FAILED  ] tests: 1 test(s), listed below:
[  FAILED  ] test_mtd_read

 1 FAILED TEST(S)
FAIL mtdlib_test (exit status: 1)