Jay

>well, I've met the same problem as you before. I have choosed not to
>include the --enable-diskonchip-biosnetboot since there's no option
>for me to use in my bios.

Exactly.

>later I redo the firmware with this option enabled, and I still have
>the problem, but I plug out the doc and boot the system from hd, when
>I saw the lilo option I plug in the doc and fdisk/format the doc, cp
>the software needed into doc. 

Well, this step I did a little different.
I put the DoC into the separate socket. On this socket I removed the
pin for the CS (chip select) and connected it to a switch. The other
end of the switch I put into the socket on the board.
Then I booted the system, and when the LILO appeared I turned the 
switch on, so the Linux found the DoC.

Here I would like to thank all the good people who helped me
and probably I could not do it without their help.
Thank you all!!!

One note.
They recommended me, that id use a DOS 5.x utility DFORMAT to
transfer the GRUB firmware to DoC. 
I must say, that DFORMAT could not transfer this to DoC, it
reported some errors.
But I could use the Linux, doc_loadbios to load the firmware
and then nftl_format to format the DoC.

Then the standard fdisk, mkfs, cp, ...

>now I can boot the doc alone without problem, but I can't get it work
>along with hd, when they met, usually the grub take the first to boot
>and hangs.
>
>I don't know why the problem exists, because I have another doc
>(someone else made it for me) which can work properly with the hd. 
>so there's no concern about the bios, it must be concerned with 
>the grub firmware I built. but what's wrong. yet it can work well
>alone.

I have the same problem.
If you find the solution, please post it to the mtd mailing list.
If I find it, I'll post it here.

Thank you once again and best regards,
Mateo

_____________________________________________________________
Brezplacen E-mail - http://email.star.si
Brezplacen prostor 100 MB,lastna domena - http://www.slohosting.com

_____________________________________________________________
Promote your group and strengthen ties to your members with email@yourgroup.org by Everyone.net  http://www.everyone.net/?btn=tag