<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
Anyway, I have what appears to be a very ruff around the edges driver for
the pmc551 cPCI Memory module by Ramix Inc.
<p>The module detects the start address in memory and the onboard DRAM
size and all that crazy stuff and appears to work fairly well all in all.
Unfortunately I am having 'issues' w/ getting the mtdblock layer to work
on it. Is there something special I should do far handling that?
<p>If I load the mtd.o then the pmc551.o then then mtdblock.o I get
a kernel panic
<p>If I load the mtd.o then the mtdblock.o then the pmc551.o everything
appears to work, but /dev/mtd0 is unussable.
<p>Apon cat'ing /dev/mtd0 I get the following kernel messages
<p>mtdblock_open
<br>ok
<br>mtdblock_open
<br>ok
<p>And that's it. It opens the device for a short duration of time
.. but nothing comes forth. I tried all sortsa fun with noluck.
<p>Any ideas, suggestions, large bat's to beat the system about the head
with?
<pre>--
Mark Ferrell : mferrell@nortelnetworks.com
(972) 685-7868 : Desk
(972) 685-4210 : Lab
(972) 879-4326 : Pager</pre>
</html>