[PATCH 2/2] mtd: spi-nor: issi: Add support for is25wx01g

[Nuno Sá]

On Mon, Sep 14, 2026 at 08:28:25AM +0200, Michael Walle wrote:
> Hi,
> 
> On Fri Sep 11, 2026 at 5:36 PM CEST, Nuno Sá wrote:
> > Add support for the ISSI IS25WX01G, a 1 Gbit octal NOR flash. The part
> > is fully described by SFDP, so only the flash ID and two BFPT fixups are
> > needed.
> 
> Adding a new flash involves minimum testing and an SFDP dump, see
> [1].
> 
> Also please keep the following Link: tag in your next version:
> 
> Link: https://www.issi.com/WW/pdf/25LX-WX01GB.pdf
> 
> > The flash has no Status Register 2 and does not implement the 35h Read
> > Configuration Register command, so the default assumption of a 16-bit
> > Write Status command does not hold. Additionally, its BFPT Quad Enable
> > Requirement field carries a reserved value, which makes
> > spi_nor_parse_bfpt() keep the manufacturer default quad enable method;
> > clear it, since this is an octal-only part with no quad mode at all.
> >
> > Signed-off-by: Nuno Sá <nuno.sa at analog.com>
> > ---
> >  drivers/mtd/spi-nor/issi.c | 27 +++++++++++++++++++++++++++
> >  1 file changed, 27 insertions(+)
> >
> > diff --git a/drivers/mtd/spi-nor/issi.c b/drivers/mtd/spi-nor/issi.c
> > index 2f057d731df2..aac9d19b90fc 100644
> > --- a/drivers/mtd/spi-nor/issi.c
> > +++ b/drivers/mtd/spi-nor/issi.c
> > @@ -29,6 +29,29 @@ static const struct spi_nor_fixups is25lp256_fixups = {
> >  	.post_bfpt = is25lp256_post_bfpt_fixups,
> >  };
> >  
> > +static int is25wx01g_post_bfpt_fixups(struct spi_nor *nor,
> > +				      const struct sfdp_parameter_header *bfpt_header,
> > +				      const struct sfdp_bfpt *bfpt)
> > +{
> > +	/*
> > +	 * There is no Status Register 2 and no 35h command. And WRITE STATUS
> > +	 * REGISTER takes a single data byte.
> > +	 */
> > +	nor->flags &= ~SNOR_F_HAS_16BIT_SR;
> > +
> > +	/*
> > +	 * The BFPT Quad Enable Requirement field is set to a reserved value, so
> > +	 * spi_nor_parse_bfpt() leaves the quad enable method at its default.
> > +	 * Make sure we disable it as there is no quad mode anyway.
> > +	 */
> > +	nor->params->quad_enable = NULL;
> > +	return 0;
> > +}
> > +
> > +static const struct spi_nor_fixups is25wx01g_fixups = {
> > +	.post_bfpt = is25wx01g_post_bfpt_fixups,
> > +};
> > +
> >  static int pm25lv_nor_late_init(struct spi_nor *nor)
> >  {
> >  	struct spi_nor_erase_map *map = &nor->params->erase_map;
> > @@ -120,6 +143,10 @@ static const struct flash_info issi_nor_parts[] = {
> >  		.id = SNOR_ID(0x9d, 0x70, 0x19),
> >  		.name = "is25wp256",
> >  		.flags = SPI_NOR_QUAD_PP,
> > +	}, {
> > +		.id = SNOR_ID(0x9d, 0x5b, 0x1b),
> > +		.name = "is25wx01g",
> No .name please.

Yes! I realize now it's obsolete.

> 
> -michael
> 
> [1] https://docs.kernel.org/driver-api/mtd/spi-nor.html
> 

Will do! Sorry for the mess! I over-confidently assumed everything was
the same between 6.18 and spi-nor/next!

- Nuno Sá

> > +		.fixups = &is25wx01g_fixups,
> >  	}
> >  };
> >  
> 
> 
> ______________________________________________________
> Linux MTD discussion mailing list
> http://lists.infradead.org/mailman/listinfo/linux-mtd/