[PATCH v5 17/25] mtd: spi-nor: winbond: Prepare introduction of W25QxxRV-M parts

[Miquel Raynal]

There is an ID collision between the JV and RV families. Both chips are
very similar in practice, it is mostly a matter of electrical
differences (mostly power consumption being lower).

As a significant difference, RV chips identify themselves as supporting
The new SFDP (rev F) field which forces an alternate write SR2 opcode
(0x31).

Since they share the IDs but not the names, we must hide the names using
a fixup.

Reviewed-by: Takahiro Kuwano <takahiro.kuwano at infineon.com>
Reviewed-by: Michael Walle <mwalle at kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com>
---
 drivers/mtd/spi-nor/winbond.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/mtd/spi-nor/winbond.c b/drivers/mtd/spi-nor/winbond.c
index cd20622916b7..1b06d10d0f6b 100644
--- a/drivers/mtd/spi-nor/winbond.c
+++ b/drivers/mtd/spi-nor/winbond.c
@@ -618,6 +618,8 @@ static const struct spi_nor_fixup winbond_fixups[] = {
 	  .fixups = &winbond_nor_multi_die_fixups },
 	{ .id = SNOR_ID(0xef, 0x40, 0x22), .match = winbond_jv_match,
 	  .fixups = &winbond_nor_multi_die_fixups },
+	{ .id = SNOR_ID(0xef, 0x70), .match = winbond_rv_match,
+	  .fixups = &winbond_nor_partname_fixups },
 	{ .id = SNOR_ID(0xef, 0x70, 0x21), .match = winbond_jv_match,
 	  .fixups = &winbond_nor_multi_die_fixups },
 	{ .id = SNOR_ID(0xef, 0x70, 0x22), .match = winbond_jv_match,

-- 
2.54.0