[PATCH v1 3/4] mtd: spi-nor: debugfs: Correct DTR protocol names for 1S-xD-xD modes

[Changhuang Liang]

The debugfs protocol names for the mixed DTR modes (1-1-1, 1-2-2,
1-4-4, 1-8-8) currently print the command phase as "1D", i.e. dual
transfer on a single line.  That does not match the protocol
definition: these modes issue the opcode on a single line in single
data rate (S), and only the address, dummy and data phases use DTR
(D).  The "1D" prefix is therefore wrong.

Rename them to "1S-xD-xD" so the names reflect that the first phase
is single-data-rate on one line, consistent with the "8D-8D-8D"
naming for SNOR_PROTO_8_8_8_DTR.

This only changes the strings printed by debugfs; no functional
behavior is affected.

Signed-off-by: Changhuang Liang <changhuang.liang at starfivetech.com>
---
 drivers/mtd/spi-nor/debugfs.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/mtd/spi-nor/debugfs.c b/drivers/mtd/spi-nor/debugfs.c
index 3f8d586a7622..f9ec5697aab0 100644
--- a/drivers/mtd/spi-nor/debugfs.c
+++ b/drivers/mtd/spi-nor/debugfs.c
@@ -45,10 +45,10 @@ static const char *spi_nor_protocol_name(enum spi_nor_protocol proto)
 	case SNOR_PROTO_2_2_2:     return "2S-2S-2S";
 	case SNOR_PROTO_4_4_4:     return "4S-4S-4S";
 	case SNOR_PROTO_8_8_8:     return "8S-8S-8S";
-	case SNOR_PROTO_1_1_1_DTR: return "1D-1D-1D";
-	case SNOR_PROTO_1_2_2_DTR: return "1D-2D-2D";
-	case SNOR_PROTO_1_4_4_DTR: return "1D-4D-4D";
-	case SNOR_PROTO_1_8_8_DTR: return "1D-8D-8D";
+	case SNOR_PROTO_1_1_1_DTR: return "1S-1D-1D";
+	case SNOR_PROTO_1_2_2_DTR: return "1S-2D-2D";
+	case SNOR_PROTO_1_4_4_DTR: return "1S-4D-4D";
+	case SNOR_PROTO_1_8_8_DTR: return "1S-8D-8D";
 	case SNOR_PROTO_8_8_8_DTR: return "8D-8D-8D";
 	}
 
-- 
2.25.1