[PATCH] mtd: spinand: winbond: Declare the QE bit on W25NxxJW

[Miquel Raynal]

Factory default for this bit is "set" (at least on the chips I have),
but we must make sure it is actually set by Linux explicitly, as the
bit is writable by an earlier stage.

Fixes: 6a804fb72de5 ("mtd: spinand: winbond: add support for serial NAND flash")
Cc: stable at vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com>
---
 drivers/mtd/nand/spi/winbond.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/nand/spi/winbond.c b/drivers/mtd/nand/spi/winbond.c
index e0138785e280..ad22774096e6 100644
--- a/drivers/mtd/nand/spi/winbond.c
+++ b/drivers/mtd/nand/spi/winbond.c
@@ -488,7 +488,7 @@ static const struct spinand_info winbond_spinand_table[] = {
 		     SPINAND_INFO_OP_VARIANTS(&read_cache_dual_quad_dtr_variants,
 					      &write_cache_variants,
 					      &update_cache_variants),
-		     0,
+		     SPINAND_HAS_QE_BIT,
 		     SPINAND_ECCINFO(&w25n01jw_ooblayout, NULL),
 		     SPINAND_CONFIGURE_CHIP(w25n0xjw_hs_cfg)),
 	SPINAND_INFO("W25N01KV", /* 3.3V */
@@ -552,7 +552,7 @@ static const struct spinand_info winbond_spinand_table[] = {
 		     SPINAND_INFO_OP_VARIANTS(&read_cache_dual_quad_dtr_variants,
 					      &write_cache_variants,
 					      &update_cache_variants),
-		     0,
+		     SPINAND_HAS_QE_BIT,
 		     SPINAND_ECCINFO(&w25m02gv_ooblayout, NULL),
 		     SPINAND_CONFIGURE_CHIP(w25n0xjw_hs_cfg)),
 	SPINAND_INFO("W25N02KV", /* 3.3V */
-- 
2.51.1