[PATCH] dt-bindings: mtd: hisilicon,504-nfc: convert to DT schema

[Rob Herring]

On Sat, Mar 07, 2026 at 04:43:56PM +0000, Akhila YS wrote:
> Convert Hisilicon Hip04 Soc NAND controller DT binding to YAML format.
> 
> Signed-off-by: Akhila YS <akhilayalmati at gmail.com>
> ---
>  .../devicetree/bindings/mtd/hisilicon,504-nfc.yaml | 90 ++++++++++++++++++++++
>  1 file changed, 90 insertions(+)

Convert implies the removal of the .txt binding. Where is that? Could be 
missing? If so, say that.

> 
> diff --git a/Documentation/devicetree/bindings/mtd/hisilicon,504-nfc.yaml b/Documentation/devicetree/bindings/mtd/hisilicon,504-nfc.yaml
> new file mode 100644
> index 000000000000..805ef0af0e04
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mtd/hisilicon,504-nfc.yaml
> @@ -0,0 +1,90 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mtd/hisilicon,504-nfc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: HiSilicon Hip04 NAND Flash Controller
> +
> +maintainers:
> +  - Miquel Raynal <miquel.raynal at bootlin.com>
> +  - Richard Weinberger <richard at nod.at>

This should be someone with the h/w. I would use the HiSilicon 
maintainer from MAINTAINERS.

> +
> +description:
> +  The HiSilicon 504 NFC is a NAND flash memory controller used in the
> +  Hip04 SoC. It supports hardware ECC for NAND devices and provides
> +  register and buffer regions for NAND operations.
> +
> +allOf:
> +  - $ref: nand-controller.yaml#
> +
> +properties:
> +  compatible:
> +    const: hisilicon,504-nfc
> +
> +  reg:
> +    minItems: 2
> +    maxItems: 2

Need to define what each entry is.

> +
> +  interrupts:
> +    maxItems: 1
> +
> +  nand-bus-width:
> +    enum: [8, 16]
> +
> +  nand-ecc-mode:
> +    enum:
> +      - none
> +      - hw
> +
> +  nand-ecc-strength:
> +    const: 16
> +
> +  nand-ecc-step-size:
> +    const: 1024
> +

> +  "#address-cells":
> +    const: 1
> +
> +  "#size-cells":
> +    const: 0

These can be dropped as the child (partitions) doesn't have an address.

> +
> +  partitions:
> +    $ref: /schemas/mtd/partitions/fixed-partitions.yaml#
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - nand-bus-width
> +  - nand-ecc-mode
> +  - "#address-cells"
> +  - "#size-cells"
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    nand-controller at 4020000 {
> +        compatible = "hisilicon,504-nfc";
> +        reg = <0x04020000 0x10000>, <0x05000000 0x1000>;
> +        interrupts = <0 379 4>;
> +        nand-bus-width = <8>;
> +        nand-ecc-mode = "hw";
> +        nand-ecc-strength = <16>;
> +        nand-ecc-step-size = <1024>;
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        partitions {
> +             compatible = "fixed-partitions";
> +             #address-cells = <1>;
> +             #size-cells = <1>;
> +
> +             partition at 0 {
> +                 label = "nand_text";
> +                 reg = <0x0 0x400000>;
> +            };
> +        };
> +    };
> +...
> 
> ---
> base-commit: d4906ae14a5f136ceb671bb14cedbf13fa560da6
> change-id: 20260306-hisi504-1-d7aa09c70d93
> 
> Best regards,
> -- 
> Akhila YS <akhilayalmati at gmail.com>
>