[PATCH RFC 3/7] mtd: spinand: winbond: Add RX sampling delay values
Frieder Schrempf
frieder at fris.de
Tue Mar 3 08:29:24 PST 2026
From: Eberhard Stoll <eberhard.stoll at kontron.de>
Add tCLQV (Clock Low to Output Valid) parameter from datasheets
for Winbond SPI NAND chips. This allows to let the drivers
properly handle high sampling delays at high clock speeds.
Signed-off-by: Eberhard Stoll <eberhard.stoll at kontron.de>
Signed-off-by: Frieder Schrempf <frieder.schrempf at kontron.de>
---
drivers/mtd/nand/spi/winbond.c | 42 ++++++++++++++++++++++++++++--------------
1 file changed, 28 insertions(+), 14 deletions(-)
diff --git a/drivers/mtd/nand/spi/winbond.c b/drivers/mtd/nand/spi/winbond.c
index 6dfd0dcc8ee7a..ec223e6d695a7 100644
--- a/drivers/mtd/nand/spi/winbond.c
+++ b/drivers/mtd/nand/spi/winbond.c
@@ -458,7 +458,8 @@ static const struct spinand_info winbond_spinand_table[] = {
&write_cache_variants,
&update_cache_variants),
0,
- SPINAND_ECCINFO(&w25m02gv_ooblayout, NULL)),
+ SPINAND_ECCINFO(&w25m02gv_ooblayout, NULL),
+ SPINAND_RX_SAMPLING_DELAY(6)),
/* 1G-bit densities */
SPINAND_INFO("W25N01GV", /* 3.3V */
SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xaa, 0x21),
@@ -468,7 +469,8 @@ static const struct spinand_info winbond_spinand_table[] = {
&write_cache_variants,
&update_cache_variants),
0,
- SPINAND_ECCINFO(&w25m02gv_ooblayout, NULL)),
+ SPINAND_ECCINFO(&w25m02gv_ooblayout, NULL),
+ SPINAND_RX_SAMPLING_DELAY(7)),
SPINAND_INFO("W25N01GW", /* 1.8V */
SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xba, 0x21),
NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1),
@@ -477,7 +479,8 @@ static const struct spinand_info winbond_spinand_table[] = {
&write_cache_variants,
&update_cache_variants),
0,
- SPINAND_ECCINFO(&w25m02gv_ooblayout, NULL)),
+ SPINAND_ECCINFO(&w25m02gv_ooblayout, NULL),
+ SPINAND_RX_SAMPLING_DELAY(8)),
SPINAND_INFO("W25N01JW", /* high-speed 1.8V */
SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xbc, 0x21),
NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1),
@@ -487,7 +490,8 @@ static const struct spinand_info winbond_spinand_table[] = {
&update_cache_variants),
0,
SPINAND_ECCINFO(&w25n01jw_ooblayout, NULL),
- SPINAND_CONFIGURE_CHIP(w25n0xjw_hs_cfg)),
+ SPINAND_CONFIGURE_CHIP(w25n0xjw_hs_cfg),
+ SPINAND_RX_SAMPLING_DELAY(6)),
SPINAND_INFO("W25N01KV", /* 3.3V */
SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xae, 0x21),
NAND_MEMORG(1, 2048, 96, 64, 1024, 20, 1, 1, 1),
@@ -496,7 +500,8 @@ static const struct spinand_info winbond_spinand_table[] = {
&write_cache_variants,
&update_cache_variants),
0,
- SPINAND_ECCINFO(&w25n01kv_ooblayout, w25n02kv_ecc_get_status)),
+ SPINAND_ECCINFO(&w25n01kv_ooblayout, w25n02kv_ecc_get_status),
+ SPINAND_RX_SAMPLING_DELAY(7)),
SPINAND_INFO("W35N01JW", /* 1.8V */
SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xdc, 0x21),
NAND_MEMORG(1, 4096, 128, 64, 512, 10, 1, 1, 1),
@@ -507,7 +512,8 @@ static const struct spinand_info winbond_spinand_table[] = {
0,
SPINAND_INFO_VENDOR_OPS(&winbond_w35_ops),
SPINAND_ECCINFO(&w35n01jw_ooblayout, NULL),
- SPINAND_CONFIGURE_CHIP(w35n0xjw_vcr_cfg)),
+ SPINAND_CONFIGURE_CHIP(w35n0xjw_vcr_cfg),
+ SPINAND_RX_SAMPLING_DELAY(6)),
SPINAND_INFO("W35N02JW", /* 1.8V */
SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xdf, 0x22),
NAND_MEMORG(1, 4096, 128, 64, 512, 10, 1, 2, 1),
@@ -518,7 +524,8 @@ static const struct spinand_info winbond_spinand_table[] = {
0,
SPINAND_INFO_VENDOR_OPS(&winbond_w35_ops),
SPINAND_ECCINFO(&w35n01jw_ooblayout, NULL),
- SPINAND_CONFIGURE_CHIP(w35n0xjw_vcr_cfg)),
+ SPINAND_CONFIGURE_CHIP(w35n0xjw_vcr_cfg),
+ SPINAND_RX_SAMPLING_DELAY(6)),
SPINAND_INFO("W35N04JW", /* 1.8V */
SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xdf, 0x23),
NAND_MEMORG(1, 4096, 128, 64, 512, 10, 1, 4, 1),
@@ -529,7 +536,8 @@ static const struct spinand_info winbond_spinand_table[] = {
0,
SPINAND_INFO_VENDOR_OPS(&winbond_w35_ops),
SPINAND_ECCINFO(&w35n01jw_ooblayout, NULL),
- SPINAND_CONFIGURE_CHIP(w35n0xjw_vcr_cfg)),
+ SPINAND_CONFIGURE_CHIP(w35n0xjw_vcr_cfg),
+ SPINAND_RX_SAMPLING_DELAY(6)),
/* 2G-bit densities */
SPINAND_INFO("W25M02GV", /* 2x1G-bit 3.3V */
SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xab, 0x21),
@@ -541,7 +549,8 @@ static const struct spinand_info winbond_spinand_table[] = {
0,
SPINAND_INFO_VENDOR_OPS(&winbond_w25_ops),
SPINAND_ECCINFO(&w25m02gv_ooblayout, NULL),
- SPINAND_SELECT_TARGET(w25m02gv_select_target)),
+ SPINAND_SELECT_TARGET(w25m02gv_select_target),
+ SPINAND_RX_SAMPLING_DELAY(7)),
SPINAND_INFO("W25N02JW", /* high-speed 1.8V */
SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xbf, 0x22),
NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 2, 1),
@@ -551,7 +560,8 @@ static const struct spinand_info winbond_spinand_table[] = {
&update_cache_variants),
0,
SPINAND_ECCINFO(&w25m02gv_ooblayout, NULL),
- SPINAND_CONFIGURE_CHIP(w25n0xjw_hs_cfg)),
+ SPINAND_CONFIGURE_CHIP(w25n0xjw_hs_cfg),
+ SPINAND_RX_SAMPLING_DELAY(7)),
SPINAND_INFO("W25N02KV", /* 3.3V */
SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xaa, 0x22),
NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 1, 1, 1),
@@ -560,7 +570,8 @@ static const struct spinand_info winbond_spinand_table[] = {
&write_cache_variants,
&update_cache_variants),
0,
- SPINAND_ECCINFO(&w25n02kv_ooblayout, w25n02kv_ecc_get_status)),
+ SPINAND_ECCINFO(&w25n02kv_ooblayout, w25n02kv_ecc_get_status),
+ SPINAND_RX_SAMPLING_DELAY(7)),
SPINAND_INFO("W25N02KW", /* 1.8V */
SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xba, 0x22),
NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 1, 1, 1),
@@ -569,7 +580,8 @@ static const struct spinand_info winbond_spinand_table[] = {
&write_cache_variants,
&update_cache_variants),
0,
- SPINAND_ECCINFO(&w25n02kv_ooblayout, w25n02kv_ecc_get_status)),
+ SPINAND_ECCINFO(&w25n02kv_ooblayout, w25n02kv_ecc_get_status),
+ SPINAND_RX_SAMPLING_DELAY(8)),
/* 4G-bit densities */
SPINAND_INFO("W25N04KV", /* 3.3V */
SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xaa, 0x23),
@@ -579,7 +591,8 @@ static const struct spinand_info winbond_spinand_table[] = {
&write_cache_variants,
&update_cache_variants),
0,
- SPINAND_ECCINFO(&w25n02kv_ooblayout, w25n02kv_ecc_get_status)),
+ SPINAND_ECCINFO(&w25n02kv_ooblayout, w25n02kv_ecc_get_status),
+ SPINAND_RX_SAMPLING_DELAY(7)),
SPINAND_INFO("W25N04KW", /* 1.8V */
SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xba, 0x23),
NAND_MEMORG(1, 2048, 128, 64, 4096, 40, 1, 1, 1),
@@ -588,7 +601,8 @@ static const struct spinand_info winbond_spinand_table[] = {
&write_cache_variants,
&update_cache_variants),
0,
- SPINAND_ECCINFO(&w25n02kv_ooblayout, w25n02kv_ecc_get_status)),
+ SPINAND_ECCINFO(&w25n02kv_ooblayout, w25n02kv_ecc_get_status),
+ SPINAND_RX_SAMPLING_DELAY(8)),
};
static int winbond_spinand_init(struct spinand_device *spinand)
--
2.53.0
More information about the linux-mtd
mailing list