mtd: spi-nor: Add Winbond w25q512jvdtr

[Pratyush Yadav]

Hi,

On Wed, Sep 10 2025, Kang.Kerry 康宇良 TAO wrote:

> Similar to the other ones, different size. The "JV-DTR" suffix is in
> the datasheet, I haven't seen mentions of a different one.
>
> The datasheet indicates DUAL and QUAD are supported.
>
> https://www.winbond.com/resource-files/W25Q512JV%20DTR%20RevD%2006292020%20133.pdf

The flash seems to have SFDP. I don't think you need an entry here at
all. The generic SFDP-based driver should be enough for you. Just add
the jedec,spi-nor node to your device tree. Try that out and only add
the entry if something isn't working, and that with explanations and
fixes to the problems.

>
> Signed-off-by: Kang.Kerry <kang.kerry at inventec.corp-partner.google.com>
> ---
>
> This modification is add BIOS W25Q512JV-DTR chip to winbond list
>
> ---
>  drivers/mtd/spi-nor/winbond.c | 5 +++++
>  1 file changed, 5 insertions(+)
>
> diff --git a/drivers/mtd/spi-nor/winbond.c b/drivers/mtd/spi-nor/winbond.c
> index 8d0a00d69e12..6ce5f70bc11a 100644
> --- a/drivers/mtd/spi-nor/winbond.c
> +++ b/drivers/mtd/spi-nor/winbond.c
> @@ -146,6 +146,11 @@ static const struct flash_info winbond_nor_parts[] = {
>   .name = "w25q512jvq",
>   .size = SZ_64M,
>   .no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
> + }, {
> + .id = SNOR_ID(0xef, 0x70, 0x20),
> + .name = "w25q512jvdtr",
> + .szie = SZ_64M,
> + .no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
>   }, {
>   .id = SNOR_ID(0xef, 0x50, 0x12),
>   .name = "w25q20bw",
> --
> 2.43.0
>

>

-- 
Regards,
Pratyush Yadav