[PATCH] mtd: nand: ecc-mxic: Lower log level during init

[Miquel Raynal]

A working init shall be silent rather than exposing the configuration
with kernel messages at the error level.

Thwart myself from the past and use the debug level for these.

Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com>
---
 drivers/mtd/nand/ecc-mxic.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/mtd/nand/ecc-mxic.c b/drivers/mtd/nand/ecc-mxic.c
index 1bf9a5a64b87..60cdcb4175ef 100644
--- a/drivers/mtd/nand/ecc-mxic.c
+++ b/drivers/mtd/nand/ecc-mxic.c
@@ -322,14 +322,14 @@ static int mxic_ecc_init_ctx(struct nand_device *nand, struct device *dev)
 	sg_init_table(ctx->sg, 2);
 
 	/* Configuration dump and sanity checks */
-	dev_err(dev, "DPE version number: %d\n",
+	dev_dbg(dev, "DPE version number: %d\n",
 		readl(mxic->regs + DP_VER) >> DP_VER_OFFSET);
-	dev_err(dev, "Chunk size: %d\n", readl(mxic->regs + CHUNK_SIZE));
-	dev_err(dev, "Main size: %d\n", readl(mxic->regs + MAIN_SIZE));
-	dev_err(dev, "Spare size: %d\n", SPARE_SZ(spare_reg));
-	dev_err(dev, "Rsv size: %ld\n", RSV_SZ(spare_reg));
-	dev_err(dev, "Parity size: %d\n", ctx->parity_sz);
-	dev_err(dev, "Meta size: %d\n", ctx->meta_sz);
+	dev_dbg(dev, "Chunk size: %d\n", readl(mxic->regs + CHUNK_SIZE));
+	dev_dbg(dev, "Main size: %d\n", readl(mxic->regs + MAIN_SIZE));
+	dev_dbg(dev, "Spare size: %d\n", SPARE_SZ(spare_reg));
+	dev_dbg(dev, "Rsv size: %ld\n", RSV_SZ(spare_reg));
+	dev_dbg(dev, "Parity size: %d\n", ctx->parity_sz);
+	dev_dbg(dev, "Meta size: %d\n", ctx->meta_sz);
 
 	if ((ctx->meta_sz + ctx->parity_sz + RSV_SZ(spare_reg)) !=
 	    SPARE_SZ(spare_reg)) {
-- 
2.51.0