[PATCH v4 0/7] mtd: rawnand: loongson: Add Loongson-2K nand controller support

[Miquel Raynal]

On Thu, 04 Sep 2025 21:06:32 +0800, Binbin Zhou wrote:
> This patchset adds support for the Loongson-2K0500/Loongson-2K1000 NAND
> controllers, which are similar to the Loongson-1C NAND controller.
> 
> They support a maximum capacity of 16GB FLASH per chip, with a maximum
> page size of 8KB. The chip supports up to 4 chip selects and 4 RDY signals.
> 
> The key difference between the Loongson-2K NAND controllers is that the
> Loongson-2K1000 explicitly configures the DMA controller routing, while
> the Loongson-2K0500 defaults to using APBDMA0.
> 
> [...]

Applied to nand/next, thanks!

[1/7] mtd: rawnand: loongson1: Rename the prefix from ls1x to loongson
      commit: 7a1e3a452a574ef337c4c2cd9202332a1ae9cd94
[2/7] mtd: rawnand: loongson: Add 6-byte NAND ID reading support
      commit: fb1dd6b6722b5187a4fa7385d0be60b28c0f9936
[3/7] mtd: rawnand: loongson: Add nand chip select support
      commit: 7ad5bdf88d7295c295a363a5daf481b283acedc2
[4/7] dt-bindings: mtd: loongson,ls1b-nand-controller: Document the Loongson-2K0500 NAND controller
      commit: 4a2bab7ccceb14b48e86794b87104248c75aa587
[5/7] mtd: rawnand: loongson: Add Loongson-2K0500 NAND controller support
      commit: e55bbdd4a4b654dfe8ee8649b3be1db82319d6c0
[6/7] dt-bindings: mtd: loongson,ls1b-nand-controller: Document the Loongson-2K1000 NAND controller
      commit: 0b1ae6480c3be58ad31afe757cbf1069ae072bb1
[7/7] mtd: rawnand: loongson: Add Loongson-2K1000 NAND controller support
      commit: 5808ae66f22e665c7131816e146548f2d7903ae1

Patche(s) should be available on mtd/linux.git and will be
part of the next PR (provided that no robot complains by then).

Kind regards,
Miquèl