[PATCH 03/19] mtd: spi-nor: Improve opcodes documentation

[Michael Walle]

On Fri Nov 14, 2025 at 6:53 PM CET, Miquel Raynal wrote:
> There are two status registers, named 1 and 2, all the opcodes imply a 1
> byte access. Make it clear by aligning all comments on the same pattern,
> for the four "{read,write} status {1,2} registers" definitions.

Not sure, what you mean. The current comment implies 1 byte access.
But that is wrong because the WRSR can be used to write both the SR1
and SR2 (or sometimes called CR).

With that fixed:
Reviewed-by: Michael Walle <mwalle at kernel.org>

-michael

> Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com>
> ---
>  include/linux/mtd/spi-nor.h | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
> index cdcfe0fd2e7d624bbb66fefcb87823bce300268e..90a0cf58351295c63baea4f064b49b7390337d37 100644
> --- a/include/linux/mtd/spi-nor.h
> +++ b/include/linux/mtd/spi-nor.h
> @@ -21,8 +21,8 @@
>  /* Flash opcodes. */
>  #define SPINOR_OP_WRDI		0x04	/* Write disable */
>  #define SPINOR_OP_WREN		0x06	/* Write enable */
> -#define SPINOR_OP_RDSR		0x05	/* Read status register */
> -#define SPINOR_OP_WRSR		0x01	/* Write status register 1 byte */
> +#define SPINOR_OP_RDSR		0x05	/* Read status register 1 */
> +#define SPINOR_OP_WRSR		0x01	/* Write status register 1 */
>  #define SPINOR_OP_RDSR2		0x3f	/* Read status register 2 */
>  #define SPINOR_OP_WRSR2		0x3e	/* Write status register 2 */
>  #define SPINOR_OP_READ		0x03	/* Read data bytes (low frequency) */

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 297 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-mtd/attachments/20251118/502c4727/attachment.sig>