[PATCH v3 5/5] mtd: spi-nor: micron-st: add comment for mt35xu02gcba

[Tudor Ambarus]

On 11/12/25 11:21 AM, Tudor Ambarus wrote:
> 
> 
> On 11/12/25 8:48 AM, Haibo Chen wrote:
>> mt35xu02gcba is similar with mt35xu01gbba, but with four
>> dies inside. According to datasheet, it contain SFDP and
>> support 8D-8D-8D mode. Add comments here, remider to change
>> the code in future if has a chance to test on this chip.
> 
> you'll need to rephrase a bit the above> 
>> Link: https://datasheet.octopart.com/MT35XU02GCBA1G12-0AAT-Micron-datasheet-138896808.pdf
>> Signed-off-by: Haibo Chen <haibo.chen at nxp.com>
>> ---
>>  drivers/mtd/spi-nor/micron-st.c | 6 ++++++
>>  1 file changed, 6 insertions(+)
>>
>> diff --git a/drivers/mtd/spi-nor/micron-st.c b/drivers/mtd/spi-nor/micron-st.c
>> index 6d081ec176c37249e5ddb724b61bd70f68088163..cc053b4d615ade3f12068618f8355779561dce55 100644
>> --- a/drivers/mtd/spi-nor/micron-st.c
>> +++ b/drivers/mtd/spi-nor/micron-st.c
>> @@ -206,6 +206,12 @@ static const struct flash_info micron_nor_parts[] = {
>>  		.fixup_flags = SPI_NOR_IO_MODE_EN_VOLATILE,
>>  		.fixups = &mt35xu01gbba_fixups,
>>  	}, {
>> +		/*
>> +		 * MT35XU02GCBA contain SFDP, so no need the size
>> +		 * and no_sfdp_flags here, should similar with
> 
> this is expected for all the flashes that have SFDP, so no need to
> specify this again here.
> 
>> +		 * MT35XU01GBBA, but with 4 dies. If someone can
>> +		 * test on this chip, can change accordingly.
>> +		 */
> 
> How about we rephrase this to:
> The MT35XU02GCBA flash device does not support chip erase, according to
> its datasheet. It only supports die erase, which means the current driver

drop "only" as it supports sector erase as well :)

> implementation will likely need to be converted to use die erase.
> Furthermore, similar to the MT35XU01GBBA, the SPI_NOR_IO_MODE_EN_VOLATILE
> flag probably needs to be enabled.
> 
> With something along the above lines you can add:
> Reviewed-by: Tudor Ambarus <tudor.ambarus at linaro.org>
> 
>>  		.id = SNOR_ID(0x2c, 0x5b, 0x1c),
>>  		.name = "mt35xu02g",
>>  		.sector_size = SZ_128K,
>>
>