[PATCH] mtd: nand: Drop explicit test for built-in CONFIG_SPI_QPIC_SNAND

[Geert Uytterhoeven]

If CONFIG_SPI_QPIC_SNAND=m, but CONFIG_MTD_NAND_QCOM=n:

    ERROR: modpost: "qcom_nandc_unalloc" [drivers/spi/spi-qpic-snand.ko] undefined!
    ...

Fix this by dropping the explicit test for a built-in
CONFIG_SPI_QPIC_SNAND completely.  Kbuild handles multiple and mixed
obj-y/obj-m rules for the same object file fine.

Reported-by: kernel test robot <lkp at intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202503280759.XhwLcV7m-lkp@intel.com/
Fixes: 7304d1909080ef0c ("spi: spi-qpic: add driver for QCOM SPI NAND flash Interface")
Signed-off-by: Geert Uytterhoeven <geert+renesas at glider.be>
---
 drivers/mtd/nand/Makefile | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index db516a45f0c52635..44913ff1bf12cc24 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -3,11 +3,8 @@
 nandcore-objs := core.o bbt.o
 obj-$(CONFIG_MTD_NAND_CORE) += nandcore.o
 obj-$(CONFIG_MTD_NAND_ECC_MEDIATEK) += ecc-mtk.o
-ifeq ($(CONFIG_SPI_QPIC_SNAND),y)
 obj-$(CONFIG_SPI_QPIC_SNAND) += qpic_common.o
-else
 obj-$(CONFIG_MTD_NAND_QCOM) += qpic_common.o
-endif
 obj-y	+= onenand/
 obj-y	+= raw/
 obj-y	+= spi/
-- 
2.43.0