[PATCH 1/6] dt-bindings: mtd: qcom,nandc: Document the SDX75 NAND

[Kaushal Kumar]

On 3/13/2025 8:18 PM, Krzysztof Kozlowski wrote:
> On 13/03/2025 14:09, Kaushal Kumar wrote:
>> Document the QPIC NAND controller v2.1.1 being used in
>> SDX75 SoC and it uses BAM DMA.
> Please wrap commit message according to Linux coding style / submission
> process (neither too early nor over the limit):
> https://elixir.bootlin.com/linux/v6.4-rc1/source/Documentation/process/submitting-patches.rst#L597
Sure, will update in v2.
>> SDX75 NAND controller has DMA-coherent and iommu support
>> so define them in the properties section, without which
>> 'dtbs_check' reports the following error:
>>
>>    nand-controller at 1cc8000: Unevaluated properties are not
>>    allowed ('dma-coherent', 'iommus' were unexpected)
> That's a new compatible, so how can you have existing errors? Looks not
> related.
It is not an existing error. It is the error that would come unless the 
new properties are updated. Anyhow sorry for the confusion, will remove 
this in v2.
>> Signed-off-by: Kaushal Kumar <quic_kaushalk at quicinc.com>
>> ---
>>   .../devicetree/bindings/mtd/qcom,nandc.yaml   | 23 ++++++++++++++-----
>>   1 file changed, 17 insertions(+), 6 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
>> index 35b4206ea918..8b77e8837205 100644
>> --- a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
>> +++ b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
>> @@ -11,12 +11,17 @@ maintainers:
>>   
>>   properties:
>>     compatible:
>> -    enum:
>> -      - qcom,ipq806x-nand
>> -      - qcom,ipq4019-nand
>> -      - qcom,ipq6018-nand
>> -      - qcom,ipq8074-nand
>> -      - qcom,sdx55-nand
>> +    OneOf:
> Testing patches before sending is still on todo list for Qualcomm :/.
I had run the "make dt_binding_check". Possibly due to my older version 
of dtschema , it did not get caught. After the schema update, now it is 
getting caught. Will update in v2.
>> +      - items:
>> +          - enum:
>> +              - qcom,sdx75-nand
>> +          - const: qcom,sdx55-nand
>> +      - items:
>> +          - const: qcom,ipq806x-nand
>> +          - const: qcom,ipq4019-nand
>> +          - const: qcom,ipq6018-nand
>> +          - const: qcom,ipq8074-nand
>> +          - const: qcom,sdx55-nand
>>   
>>     reg:
>>       maxItems: 1
>> @@ -31,6 +36,12 @@ properties:
>>         - const: core
>>         - const: aon
>>   
>> +  dma-coherent: true
> Which controllers are DMA coherent?
I will add it under a sdx75 check since it is applicable to sdx75 only.
>
>> +
>> +  iommus:
>> +    minItems: 1
>> +    maxItems: 3
> You need to list the items. Why is this flexible?
Agree, this need not be flexible. Will update in v2.
>
>> +
>>     qcom,cmd-crci:
>>       $ref: /schemas/types.yaml#/definitions/uint32
>>       description:
>
> Best regards,
> Krzysztof