[PATCH v2] mtd: spi-nor: spansion: Fixup params->set_4byte_addr_mode for SEMPER

[Tudor Ambarus]

On 6/12/25 8:44 AM, tkuw584924 at gmail.com wrote:
> From: Takahiro Kuwano <Takahiro.Kuwano at infineon.com>
> 
> Infineon SEMPER flash family does not support E9h opcode as Exit 4-byte
> mode (EX4B). Therefore, params->set_4byte_addr_mode is not determined by
> BFPT parse. Fixup it up by introducing vendor specific EX4B opcode (B8h)
> and function.
> 
> Fixes: c87c9b11c53ce ("mtd: spi-nor: spansion: Determine current address mode")
> Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano at infineon.com>

Acked-by: Tudor Ambarus <tudor.ambarus at linaro.org>

> ---
> Changes in v2:
>   - Move set_4byte_addr_mode() assignment to post_bfpt fixup
> 
>  drivers/mtd/spi-nor/spansion.c | 31 +++++++++++++++++++++++++++++++
>  1 file changed, 31 insertions(+)
> 
> diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
> index bf08dbf5e742..b9f156c0f8bc 100644
> --- a/drivers/mtd/spi-nor/spansion.c
> +++ b/drivers/mtd/spi-nor/spansion.c
> @@ -17,6 +17,7 @@
>  
>  #define SPINOR_OP_CLSR		0x30	/* Clear status register 1 */
>  #define SPINOR_OP_CLPEF		0x82	/* Clear program/erase failure flags */
> +#define SPINOR_OP_CYPRESS_EX4B	0xB8	/* Exit 4-byte address mode */
>  #define SPINOR_OP_CYPRESS_DIE_ERASE		0x61	/* Chip (die) erase */
>  #define SPINOR_OP_RD_ANY_REG			0x65	/* Read any register */
>  #define SPINOR_OP_WR_ANY_REG			0x71	/* Write any register */
> @@ -58,6 +59,13 @@
>  		   SPI_MEM_OP_DUMMY(ndummy, 0),				\
>  		   SPI_MEM_OP_DATA_IN(1, buf, 0))
>  
> +#define CYPRESS_NOR_EN4B_EX4B_OP(enable)				\
> +	SPI_MEM_OP(SPI_MEM_OP_CMD(enable ? SPINOR_OP_EN4B :		\
> +					   SPINOR_OP_CYPRESS_EX4B, 0),	\
> +		   SPI_MEM_OP_NO_ADDR,					\
> +		   SPI_MEM_OP_NO_DUMMY,					\
> +		   SPI_MEM_OP_NO_DATA)
> +
>  #define SPANSION_OP(opcode)						\
>  	SPI_MEM_OP(SPI_MEM_OP_CMD(opcode, 0),				\
>  		   SPI_MEM_OP_NO_ADDR,					\
> @@ -356,6 +364,20 @@ static int cypress_nor_quad_enable_volatile(struct spi_nor *nor)
>  	return 0;
>  }
>  
> +static int cypress_nor_set_4byte_addr_mode(struct spi_nor *nor, bool enable)
> +{
> +	int ret;
> +	struct spi_mem_op op = CYPRESS_NOR_EN4B_EX4B_OP(enable);
> +
> +	spi_nor_spimem_setup_op(nor, &op, nor->reg_proto);
> +
> +	ret = spi_mem_exec_op(nor->spimem, &op);
> +	if (ret)
> +		dev_dbg(nor->dev, "error %d setting 4-byte mode\n", ret);
> +
> +	return ret;
> +}
> +
>  /**
>   * cypress_nor_determine_addr_mode_by_sr1() - Determine current address mode
>   *                                            (3 or 4-byte) by querying status
> @@ -526,6 +548,9 @@ s25fs256t_post_bfpt_fixup(struct spi_nor *nor,
>  	struct spi_mem_op op;
>  	int ret;
>  
> +	/* Assign 4-byte address mode method that is not determined in BFPT */
> +	nor->params->set_4byte_addr_mode = cypress_nor_set_4byte_addr_mode;
> +
>  	ret = cypress_nor_set_addr_mode_nbytes(nor);
>  	if (ret)
>  		return ret;
> @@ -591,6 +616,9 @@ s25hx_t_post_bfpt_fixup(struct spi_nor *nor,
>  {
>  	int ret;
>  
> +	/* Assign 4-byte address mode method that is not determined in BFPT */
> +	nor->params->set_4byte_addr_mode = cypress_nor_set_4byte_addr_mode;
> +
>  	ret = cypress_nor_set_addr_mode_nbytes(nor);
>  	if (ret)
>  		return ret;
> @@ -718,6 +746,9 @@ static int s28hx_t_post_bfpt_fixup(struct spi_nor *nor,
>  				   const struct sfdp_parameter_header *bfpt_header,
>  				   const struct sfdp_bfpt *bfpt)
>  {
> +	/* Assign 4-byte address mode method that is not determined in BFPT */
> +	nor->params->set_4byte_addr_mode = cypress_nor_set_4byte_addr_mode;
> +
>  	return cypress_nor_set_addr_mode_nbytes(nor);
>  }
>