[PATCH v1 7/8] dt-bindings: mtd: loongson,ls1b-nand-controller: Document the Loongson-2K1000 NAND controller
Binbin Zhou
zhoubinbin at loongson.cn
Tue Jul 22 02:11:06 PDT 2025
Add new compatible for the Loongson-2K NAND controller used for
Loongson-2K1000 SoC.
Signed-off-by: Binbin Zhou <zhoubinbin at loongson.cn>
---
.../mtd/loongson,ls1b-nand-controller.yaml | 58 +++++++++++++++++--
1 file changed, 54 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/mtd/loongson,ls1b-nand-controller.yaml b/Documentation/devicetree/bindings/mtd/loongson,ls1b-nand-controller.yaml
index 4ec2b5d1e89d..07a0d9b40fdd 100644
--- a/Documentation/devicetree/bindings/mtd/loongson,ls1b-nand-controller.yaml
+++ b/Documentation/devicetree/bindings/mtd/loongson,ls1b-nand-controller.yaml
@@ -26,18 +26,19 @@ properties:
- loongson,ls1b-nand-controller
- loongson,ls1c-nand-controller
- loongson,ls2k0500-nand-controller
+ - loongson,ls2k1000-nand-controller
- items:
- enum:
- loongson,ls1a-nand-controller
- const: loongson,ls1b-nand-controller
reg:
- maxItems: 2
+ minItems: 2
+ maxItems: 3
reg-names:
- items:
- - const: nand
- - const: nand-dma
+ minItems: 2
+ maxItems: 3
dmas:
maxItems: 1
@@ -54,6 +55,32 @@ required:
unevaluatedProperties: false
+if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - loongson,ls2k1000-nand-controller
+
+then:
+ properties:
+ reg:
+ minItems: 3
+ reg-names:
+ items:
+ - const: nand
+ - const: nand-dma
+ - const: dma-config
+
+else:
+ properties:
+ reg:
+ maxItems: 2
+ reg-names:
+ items:
+ - const: nand
+ - const: nand-dma
+
examples:
- |
nand-controller at 1fe78000 {
@@ -72,3 +99,26 @@ examples:
nand-ecc-algo = "hamming";
};
};
+
+ - |
+ nand-controller at 1fe26000 {
+ compatible = "loongson,ls2k1000-nand-controller";
+ reg = <0x1fe26000 0x24>,
+ <0x1fe26040 0x4>,
+ <0x1fe00438 0x8>;
+ reg-names = "nand", "nand-dma", "dma-config";
+ dmas = <&apbdma0 0>;
+ dma-names = "rxtx";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ nand at 0 {
+ reg = <0>;
+ label = "ls2k1000-nand";
+ nand-use-soft-ecc-engine;
+ nand-ecc-algo = "bch";
+ nand-ecc-strength = <8>;
+ nand-ecc-step-size = <512>;
+ };
+ };
--
2.47.3
More information about the linux-mtd
mailing list