[PATCH] mtd: rawnand: hynix: don't try read-retry on SLC NANDs

[Hector Palacios]

Some SLC NANDs like H27U4G8F2D expose a valid JEDEC ID yet they don't
support the read-retry mechanism, and fail.
Since SLC NANDs don't require read-retry, continue only if the bits per
cell is bigger than 1.

Signed-off-by: Hector Palacios <hector.palacios at digi.com>
---
 drivers/mtd/nand/raw/nand_hynix.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/nand/raw/nand_hynix.c b/drivers/mtd/nand/raw/nand_hynix.c
index c02e50608816..b663659b2f49 100644
--- a/drivers/mtd/nand/raw/nand_hynix.c
+++ b/drivers/mtd/nand/raw/nand_hynix.c
@@ -377,9 +377,9 @@ static int hynix_nand_rr_init(struct nand_chip *chip)
 
 	/*
 	 * We only support read-retry for 1xnm NANDs, and those NANDs all
-	 * expose a valid JEDEC ID.
+	 * expose a valid JEDEC ID. SLC NANDs don't require read-retry.
 	 */
-	if (valid_jedecid) {
+	if (valid_jedecid && nanddev_bits_per_cell(&chip->base) > 1) {
 		u8 nand_tech = chip->id.data[5] >> 4;
 
 		/* 1xnm technology */