[PATCH 5/9] dt-bindings: dma: Convert fsl,elo*-dma bindings to YAML
J. Neuschäfer via B4 Relay
devnull+j.ne.posteo.net at kernel.org
Sun Jan 26 10:59:00 PST 2025
From: "J. Neuschäfer" <j.ne at posteo.net>
The devicetree bindings for Freescale DMA engines have so far existed as
a text file. This patch converts them to YAML, and specifies all the
compatible strings currently in use in arch/powerpc/boot/dts.
Signed-off-by: J. Neuschäfer <j.ne at posteo.net>
---
.../devicetree/bindings/dma/fsl,elo-dma.yaml | 129 +++++++++++++
.../devicetree/bindings/dma/fsl,elo3-dma.yaml | 105 +++++++++++
.../devicetree/bindings/dma/fsl,eloplus-dma.yaml | 120 ++++++++++++
.../devicetree/bindings/powerpc/fsl/dma.txt | 204 ---------------------
4 files changed, 354 insertions(+), 204 deletions(-)
diff --git a/Documentation/devicetree/bindings/dma/fsl,elo-dma.yaml b/Documentation/devicetree/bindings/dma/fsl,elo-dma.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..d1f4978a672c1217c322c27f243470b2de8c99d4
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/fsl,elo-dma.yaml
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/fsl,elo-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Elo DMA Controller
+
+maintainers:
+ - J. Neuschäfer <j.ne at posteo.net>
+
+description: |
+ This is a little-endian 4-channel DMA controller, used in Freescale mpc83xx
+ series chips such as mpc8315, mpc8349, mpc8379 etc.
+
+ Note on DMA channel compatible properties: The compatible property must say
+ "fsl,elo-dma-channel" or "fsl,eloplus-dma-channel" to be used by the Elo DMA
+ driver (fsldma). Any DMA channel used by fsldma cannot be used by another
+ DMA driver, such as the SSI sound drivers for the MPC8610. Therefore, any
+ DMA channel that should be used for another driver should not use
+ "fsl,elo-dma-channel" or "fsl,eloplus-dma-channel". For the SSI drivers, for
+ example, the compatible property should be "fsl,ssi-dma-channel". See
+ ssi.txt for more information.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - fsl,mpc8313-dma
+ - fsl,mpc8315-dma
+ - fsl,mpc8323-dma
+ - fsl,mpc8347-dma
+ - fsl,mpc8349-dma
+ - fsl,mpc8360-dma
+ - fsl,mpc8377-dma
+ - fsl,mpc8378-dma
+ - fsl,mpc8379-dma
+ - const: fsl,elo-dma
+
+ reg:
+ maxItems: 1
+ description:
+ DMA General Status Register, i.e. DGSR which contains status for
+ all the 4 DMA channels.
+
+ ranges: true
+
+ cell-index:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Controller index. 0 for controller @ 0x8100.
+
+ interrupts:
+ maxItems: 1
+
+patternProperties:
+ "^dma-channel at .*$":
+ type: object
+
+ properties:
+ compatible:
+ items:
+ - enum:
+ - fsl,mpc8315-dma-channel
+ - fsl,mpc8323-dma-channel
+ - fsl,mpc8347-dma-channel
+ - fsl,mpc8349-dma-channel
+ - fsl,mpc8360-dma-channel
+ - fsl,mpc8377-dma-channel
+ - fsl,mpc8378-dma-channel
+ - fsl,mpc8379-dma-channel
+ - const: fsl,elo-dma-channel
+
+ reg:
+ maxItems: 1
+
+ cell-index:
+ description: DMA channel index starts at 0.
+
+ interrupts: true
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: true
+
+examples:
+ - |
+ dma at 82a8 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
+ reg = <0x82a8 4>;
+ ranges = <0 0x8100 0x1a4>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ cell-index = <0>;
+ dma-channel at 0 {
+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+ cell-index = <0>;
+ reg = <0 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel at 80 {
+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+ cell-index = <1>;
+ reg = <0x80 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel at 100 {
+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+ cell-index = <2>;
+ reg = <0x100 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ dma-channel at 180 {
+ compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+ cell-index = <3>;
+ reg = <0x180 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/fsl,elo3-dma.yaml b/Documentation/devicetree/bindings/dma/fsl,elo3-dma.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..d4853ffd40dc75c7fcdc0dfb15e497ec56f3e1ba
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/fsl,elo3-dma.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/fsl,elo3-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Elo3 DMA Controller
+
+maintainers:
+ - J. Neuschäfer <j.ne at posteo.net>
+
+description: |
+ DMA controller which has same function as EloPlus except that Elo3 has 8
+ channels while EloPlus has only 4, it is used in Freescale Txxx and Bxxx
+ series chips, such as t1040, t4240, b4860.
+
+ Note on DMA channel compatible properties: The compatible property must say
+ "fsl,elo-dma-channel" or "fsl,eloplus-dma-channel" to be used by the Elo DMA
+ driver (fsldma). Any DMA channel used by fsldma cannot be used by another
+ DMA driver, such as the SSI sound drivers for the MPC8610. Therefore, any DMA
+ channel that should be used for another driver should not use
+ "fsl,elo-dma-channel" or "fsl,eloplus-dma-channel". For the SSI drivers, for
+ example, the compatible property should be "fsl,ssi-dma-channel". See ssi.txt
+ for more information.
+
+properties:
+ compatible:
+ const: fsl,elo3-dma
+
+ reg:
+ maxItems: 2
+ description: |
+ contains two entries for DMA General Status Registers, i.e. DGSR0 which
+ includes status for channel 1~4, and DGSR1 for channel 5~8
+
+ interrupts:
+ maxItems: 1
+
+patternProperties:
+ "^dma-channel at .*$":
+ type: object
+
+ properties:
+ compatible:
+ const: fsl,eloplus-dma-channel
+
+ reg:
+ maxItems: 1
+
+ interrupts: true
+
+examples:
+ - |
+ dma at 100300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,elo3-dma";
+ reg = <0x100300 0x4>,
+ <0x100600 0x4>;
+ ranges = <0x0 0x100100 0x500>;
+ dma-channel at 0 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ interrupts = <28 2 0 0>;
+ };
+ dma-channel at 80 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ interrupts = <29 2 0 0>;
+ };
+ dma-channel at 100 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ interrupts = <30 2 0 0>;
+ };
+ dma-channel at 180 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ interrupts = <31 2 0 0>;
+ };
+ dma-channel at 300 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x300 0x80>;
+ interrupts = <76 2 0 0>;
+ };
+ dma-channel at 380 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x380 0x80>;
+ interrupts = <77 2 0 0>;
+ };
+ dma-channel at 400 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x400 0x80>;
+ interrupts = <78 2 0 0>;
+ };
+ dma-channel at 480 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x480 0x80>;
+ interrupts = <79 2 0 0>;
+ };
+ };
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/dma/fsl,eloplus-dma.yaml b/Documentation/devicetree/bindings/dma/fsl,eloplus-dma.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..680d64332ddf4d6d68ee8c607ac71211a7e19e6e
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/fsl,eloplus-dma.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/fsl,eloplus-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale EloPlus DMA Controller
+
+maintainers:
+ - J. Neuschäfer <j.ne at posteo.net>
+
+description: |
+ This is a 4-channel DMA controller with extended addresses and chaining,
+ mainly used in Freescale mpc85xx/86xx, Pxxx and BSC series chips, such as
+ mpc8540, mpc8641 p4080, bsc9131 etc.
+
+ Note on DMA channel compatible properties: The compatible property must say
+ "fsl,elo-dma-channel" or "fsl,eloplus-dma-channel" to be used by the Elo DMA
+ driver (fsldma). Any DMA channel used by fsldma cannot be used by another
+ DMA driver, such as the SSI sound drivers for the MPC8610. Therefore, any DMA
+ channel that should be used for another driver should not use
+ "fsl,elo-dma-channel" or "fsl,eloplus-dma-channel". For the SSI drivers, for
+ example, the compatible property should be "fsl,ssi-dma-channel". See ssi.txt
+ for more information.
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - fsl,mpc8540-dma
+ - fsl,mpc8541-dma
+ - fsl,mpc8548-dma
+ - fsl,mpc8555-dma
+ - fsl,mpc8560-dma
+ - fsl,mpc8572-dma
+ - fsl,mpc8641-dma
+ - const: fsl,eloplus-dma
+ - const: fsl,eloplus-dma
+
+ reg:
+ maxItems: 1
+ description:
+ DMA General Status Register, i.e. DGSR which contains
+ status for all the 4 DMA channels
+
+ cell-index:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ controller index. 0 for controller @ 0x21000, 1 for controller @ 0xc000
+
+ interrupts:
+ maxItems: 1
+
+patternProperties:
+ "^dma-channel at .*$":
+ type: object
+
+ properties:
+ compatible:
+ items:
+ - enum:
+ - fsl,mpc8540-dma-channel
+ - fsl,mpc8541-dma-channel
+ - fsl,mpc8548-dma-channel
+ - fsl,mpc8555-dma-channel
+ - fsl,mpc8560-dma-channel
+ - fsl,mpc8572-dma-channel
+ - const: fsl,eloplus-dma-channel
+
+ reg:
+ maxItems: 1
+
+ cell-index:
+ description: DMA channel index starts at 0.
+
+ interrupts: true
+
+examples:
+ - |
+ dma at 21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma";
+ reg = <0x21300 4>;
+ ranges = <0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel at 0 {
+ compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
+ reg = <0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel at 80 {
+ compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel at 100 {
+ compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel at 180 {
+ compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/dma.txt b/Documentation/devicetree/bindings/powerpc/fsl/dma.txt
deleted file mode 100644
index c11ad5c6db2190bf38c160632d9997122e169945..0000000000000000000000000000000000000000
--- a/Documentation/devicetree/bindings/powerpc/fsl/dma.txt
+++ /dev/null
@@ -1,204 +0,0 @@
-* Freescale DMA Controllers
-
-** Freescale Elo DMA Controller
- This is a little-endian 4-channel DMA controller, used in Freescale mpc83xx
- series chips such as mpc8315, mpc8349, mpc8379 etc.
-
-Required properties:
-
-- compatible : must include "fsl,elo-dma"
-- reg : DMA General Status Register, i.e. DGSR which contains
- status for all the 4 DMA channels
-- ranges : describes the mapping between the address space of the
- DMA channels and the address space of the DMA controller
-- cell-index : controller index. 0 for controller @ 0x8100
-- interrupts : interrupt specifier for DMA IRQ
-
-- DMA channel nodes:
- - compatible : must include "fsl,elo-dma-channel"
- However, see note below.
- - reg : DMA channel specific registers
- - cell-index : DMA channel index starts at 0.
-
-Optional properties:
- - interrupts : interrupt specifier for DMA channel IRQ
- (on 83xx this is expected to be identical to
- the interrupts property of the parent node)
-
-Example:
- dma at 82a8 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
- reg = <0x82a8 4>;
- ranges = <0 0x8100 0x1a4>;
- interrupt-parent = <&ipic>;
- interrupts = <71 8>;
- cell-index = <0>;
- dma-channel at 0 {
- compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
- cell-index = <0>;
- reg = <0 0x80>;
- interrupt-parent = <&ipic>;
- interrupts = <71 8>;
- };
- dma-channel at 80 {
- compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
- cell-index = <1>;
- reg = <0x80 0x80>;
- interrupt-parent = <&ipic>;
- interrupts = <71 8>;
- };
- dma-channel at 100 {
- compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
- cell-index = <2>;
- reg = <0x100 0x80>;
- interrupt-parent = <&ipic>;
- interrupts = <71 8>;
- };
- dma-channel at 180 {
- compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
- cell-index = <3>;
- reg = <0x180 0x80>;
- interrupt-parent = <&ipic>;
- interrupts = <71 8>;
- };
- };
-
-** Freescale EloPlus DMA Controller
- This is a 4-channel DMA controller with extended addresses and chaining,
- mainly used in Freescale mpc85xx/86xx, Pxxx and BSC series chips, such as
- mpc8540, mpc8641 p4080, bsc9131 etc.
-
-Required properties:
-
-- compatible : must include "fsl,eloplus-dma"
-- reg : DMA General Status Register, i.e. DGSR which contains
- status for all the 4 DMA channels
-- cell-index : controller index. 0 for controller @ 0x21000,
- 1 for controller @ 0xc000
-- ranges : describes the mapping between the address space of the
- DMA channels and the address space of the DMA controller
-
-- DMA channel nodes:
- - compatible : must include "fsl,eloplus-dma-channel"
- However, see note below.
- - cell-index : DMA channel index starts at 0.
- - reg : DMA channel specific registers
- - interrupts : interrupt specifier for DMA channel IRQ
-
-Example:
- dma at 21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma";
- reg = <0x21300 4>;
- ranges = <0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel at 0 {
- compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
- reg = <0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel at 80 {
- compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel at 100 {
- compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel at 180 {
- compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
-** Freescale Elo3 DMA Controller
- DMA controller which has same function as EloPlus except that Elo3 has 8
- channels while EloPlus has only 4, it is used in Freescale Txxx and Bxxx
- series chips, such as t1040, t4240, b4860.
-
-Required properties:
-
-- compatible : must include "fsl,elo3-dma"
-- reg : contains two entries for DMA General Status Registers,
- i.e. DGSR0 which includes status for channel 1~4, and
- DGSR1 for channel 5~8
-- ranges : describes the mapping between the address space of the
- DMA channels and the address space of the DMA controller
-
-- DMA channel nodes:
- - compatible : must include "fsl,eloplus-dma-channel"
- - reg : DMA channel specific registers
- - interrupts : interrupt specifier for DMA channel IRQ
-
-Example:
-dma at 100300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,elo3-dma";
- reg = <0x100300 0x4>,
- <0x100600 0x4>;
- ranges = <0x0 0x100100 0x500>;
- dma-channel at 0 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- interrupts = <28 2 0 0>;
- };
- dma-channel at 80 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- interrupts = <29 2 0 0>;
- };
- dma-channel at 100 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- interrupts = <30 2 0 0>;
- };
- dma-channel at 180 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- interrupts = <31 2 0 0>;
- };
- dma-channel at 300 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x300 0x80>;
- interrupts = <76 2 0 0>;
- };
- dma-channel at 380 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x380 0x80>;
- interrupts = <77 2 0 0>;
- };
- dma-channel at 400 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x400 0x80>;
- interrupts = <78 2 0 0>;
- };
- dma-channel at 480 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x480 0x80>;
- interrupts = <79 2 0 0>;
- };
-};
-
-Note on DMA channel compatible properties: The compatible property must say
-"fsl,elo-dma-channel" or "fsl,eloplus-dma-channel" to be used by the Elo DMA
-driver (fsldma). Any DMA channel used by fsldma cannot be used by another
-DMA driver, such as the SSI sound drivers for the MPC8610. Therefore, any DMA
-channel that should be used for another driver should not use
-"fsl,elo-dma-channel" or "fsl,eloplus-dma-channel". For the SSI drivers, for
-example, the compatible property should be "fsl,ssi-dma-channel". See ssi.txt
-for more information.
--
2.48.0.rc1.219.gb6b6757d772
More information about the linux-mtd
mailing list