[PATCH v3 0/5] Enable QPIC BAM and QPIC NAND support for SDX75

[Kaushal Kumar]

Hello,

This series adds and enables devicetree nodes for QPIC BAM and QPIC NAND
for Qualcomm SDX75 platform.

This patch series depends on the below patches:
https://lore.kernel.org/linux-spi/20250410100019.2872271-1-quic_mdalam@quicinc.com/

---
Changes since v2:
 - Add qcom,bam-v1.7.4 as a compatible for QPIC BAM DMA controller DT node.
 - Link to v2: https://lore.kernel.org/all/20250415072756.20046-1-quic_kaushalk@quicinc.com/

Changes since v1:
 - Use sleep clock instead of adding a dummy clock for QPIC NAND since
   sleep clock has the required properties.
 - QPIC BAM controllers have dma-coherent support hence document it as a
   global property.
 - dma-coherent property is not applicable for QPIC NAND controller so
   remove it.
 - iommus items is fixed for SDX75 NAND controller so document it likewise.
 - Merge QPIC NAND and BAM devicetree enablement into a single patch.
 - Fix minor coding style issues.
 - Link to v1: https://lore.kernel.org/all/5a1b52a3-962b-04f9-cdfc-4e38983610b5@quicinc.com/

Kaushal Kumar (5):
  dt-bindings: mtd: qcom,nandc: Document the SDX75 NAND controller
  dt-bindings: dma: qcom,bam: Document dma-coherent property
  arm64: dts: qcom: sdx75: Add QPIC BAM support
  arm64: dts: qcom: sdx75: Add QPIC NAND support
  arm64: dts: qcom: sdx75-idp: Enable QPIC BAM & QPIC NAND support

 .../devicetree/bindings/dma/qcom,bam-dma.yaml |  2 ++
 .../devicetree/bindings/mtd/qcom,nandc.yaml   | 30 +++++++++++++----
 arch/arm64/boot/dts/qcom/sdx75-idp.dts        | 18 ++++++++++
 arch/arm64/boot/dts/qcom/sdx75.dtsi           | 33 +++++++++++++++++++
 4 files changed, 77 insertions(+), 6 deletions(-)

--
2.17.1