[PATCH] spi: spi-mem: rtl-snand: Correctly handle DMA transfers

[Chris Packham]

The RTL9300 has some limitations on the maximum DMA transfers possible.
For reads this is 2080 bytes (520*4) for writes this is 520 bytes. Deal
with this by splitting transfers into appropriately sized parts. Also
ensure that we are using the correct buffer when doing DMA writes.

Fixes: 42d20a6a61b8 ("spi: spi-mem: Add Realtek SPI-NAND controller")
Signed-off-by: Chris Packham <chris.packham at alliedtelesis.co.nz>
---
 drivers/spi/spi-realtek-rtl-snand.c | 51 +++++++++++++++++++----------
 1 file changed, 34 insertions(+), 17 deletions(-)

diff --git a/drivers/spi/spi-realtek-rtl-snand.c b/drivers/spi/spi-realtek-rtl-snand.c
index 23c42c8469e4..50b3240641e8 100644
--- a/drivers/spi/spi-realtek-rtl-snand.c
+++ b/drivers/spi/spi-realtek-rtl-snand.c
@@ -231,19 +231,25 @@ static int rtl_snand_xfer(struct rtl_snand *snand, int cs, const struct spi_mem_
 
 static int rtl_snand_dma_xfer(struct rtl_snand *snand, int cs, const struct spi_mem_op *op)
 {
+	unsigned int pos, nbytes;
 	int ret;
 	dma_addr_t buf_dma;
 	enum dma_data_direction dir;
-	u32 trig;
+	u32 trig, len, maxlen;
+	void *buf;
 
 	ret = rtl_snand_xfer_head(snand, cs, op);
 	if (ret)
 		goto out_deselect;
 
 	if (op->data.dir == SPI_MEM_DATA_IN) {
+		maxlen = 2080;
+		buf = op->data.buf.in;
 		dir = DMA_FROM_DEVICE;
 		trig = 0;
 	} else if (op->data.dir == SPI_MEM_DATA_OUT) {
+		maxlen = 520;
+		buf = op->data.buf.out;
 		dir = DMA_TO_DEVICE;
 		trig = 1;
 	} else {
@@ -251,7 +257,7 @@ static int rtl_snand_dma_xfer(struct rtl_snand *snand, int cs, const struct spi_
 		goto out_deselect;
 	}
 
-	buf_dma = dma_map_single(snand->dev, op->data.buf.in, op->data.nbytes, dir);
+	buf_dma = dma_map_single(snand->dev, buf, op->data.nbytes, dir);
 	ret = dma_mapping_error(snand->dev, buf_dma);
 	if (ret)
 		goto out_deselect;
@@ -264,26 +270,37 @@ static int rtl_snand_dma_xfer(struct rtl_snand *snand, int cs, const struct spi_
 	if (ret)
 		goto out_unmap;
 
-	reinit_completion(&snand->comp);
+	pos = 0;
+	len = op->data.nbytes;
 
-	ret = regmap_write(snand->regmap, SNAFDRSAR, buf_dma);
-	if (ret)
-		goto out_disable_int;
+	while (pos < len) {
+		nbytes = len - pos;
+		if (nbytes > maxlen)
+			nbytes = maxlen;
 
-	ret = regmap_write(snand->regmap, SNAFDLR,
-			   CMR_WID(op->data.buswidth) | (op->data.nbytes & 0xffff));
-	if (ret)
-		goto out_disable_int;
+		reinit_completion(&snand->comp);
 
-	ret = regmap_write(snand->regmap, SNAFDTR, trig);
-	if (ret)
-		goto out_disable_int;
+		ret = regmap_write(snand->regmap, SNAFDRSAR, buf_dma + pos);
+		if (ret)
+			goto out_disable_int;
 
-	if (!wait_for_completion_timeout(&snand->comp, usecs_to_jiffies(20000)))
-		ret = -ETIMEDOUT;
+		pos += nbytes;
 
-	if (ret)
-		goto out_disable_int;
+		ret = regmap_write(snand->regmap, SNAFDLR,
+				CMR_WID(op->data.buswidth) | nbytes);
+		if (ret)
+			goto out_disable_int;
+
+		ret = regmap_write(snand->regmap, SNAFDTR, trig);
+		if (ret)
+			goto out_disable_int;
+
+		if (!wait_for_completion_timeout(&snand->comp, usecs_to_jiffies(20000)))
+			ret = -ETIMEDOUT;
+
+		if (ret)
+			goto out_disable_int;
+	}
 
 out_disable_int:
 	regmap_update_bits(snand->regmap, SNAFCFR, SNAFCFR_DMA_IE, 0);
-- 
2.47.0