[PATCH v2 3/3] mtd: rawnand: qcom: Fix read len for onfi param page

[Manivannan Sadhasivam]

On Fri, Nov 22, 2024 at 02:29:33PM +0530, Md Sadre Alam wrote:
> The minimum size to fetch the data from device to QPIC buffer
> is 512-bytes. If size is less than 512-bytes the data will not be
> protected by ECC as per QPIC standard. So while reading onfi parameter
> page from NAND device setting nandc->buf_count = 512.

s/setting/set

> 
> Cc: stable at vger.kernel.org
> Fixes: 89550beb098e ("mtd: rawnand: qcom: Implement exec_op()")
> Signed-off-by: Md Sadre Alam <quic_mdalam at quicinc.com>

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>

- Mani

> ---
> 
> Change in [v2]
> 
> * Set buf_count to 512 in the parameter page read
> 
> Change in [v1]
> 
> * This patch was not included in v1
> 
>  drivers/mtd/nand/raw/qcom_nandc.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
> index 31ec3db1246d..e1dca4857754 100644
> --- a/drivers/mtd/nand/raw/qcom_nandc.c
> +++ b/drivers/mtd/nand/raw/qcom_nandc.c
> @@ -2926,7 +2926,7 @@ static int qcom_param_page_type_exec(struct nand_chip *chip,  const struct nand_
>  		write_reg_dma(nandc, NAND_DEV_CMD1, 1, NAND_BAM_NEXT_SGL);
>  	}
>  
> -	nandc->buf_count = len;
> +	nandc->buf_count = 512;
>  	memset(nandc->data_buffer, 0xff, nandc->buf_count);
>  
>  	config_nand_single_cw_page_read(chip, false, 0);
> -- 
> 2.34.1
> 

-- 
மணிவண்ணன் சதாசிவம்