[PATCH v2 0/3] QPIC v2 fixes for SDX75

[Lakshmi Sowjanya D (QUIC)]

> -----Original Message-----
> From: Md Sadre Alam (QUIC) <quic_mdalam at quicinc.com>
> Sent: Friday, November 22, 2024 2:30 PM
> To: manivannan.sadhasivam at linaro.org; miquel.raynal at bootlin.com;
> richard at nod.at; vigneshr at ti.com; bbrezillon at kernel.org; linux-
> mtd at lists.infradead.org; linux-arm-msm at vger.kernel.org; linux-
> kernel at vger.kernel.org
> Cc: Sricharan Ramabadhran (QUIC) <quic_srichara at quicinc.com>;
> Varadarajan Narayanan (QUIC) <quic_varada at quicinc.com>; Md Sadre Alam
> (QUIC) <quic_mdalam at quicinc.com>; Naina Mehta (QUIC)
> <quic_nainmeht at quicinc.com>; Lakshmi Sowjanya D (QUIC)
> <quic_laksd at quicinc.com>
> Subject: [PATCH v2 0/3] QPIC v2 fixes for SDX75
> 
> v2:
>  * Updated commit message
>  * Added stable kernel tag
>  * Added Fixes tag
>  * Renamed the variable from offset_from_qpic to nandc_offset
>  * Set buf_count to 512 in the parameter page read
>  * Replaced the buf_count value of 512 with the len in bytes
> 
> v1:
>  * These patches will fix the following:
>  * 1) onfi param page read which was broken by exec_op() patch.
>  * 2) Fixed offset passed to BAM from QPIC base
> 
> Md Sadre Alam (3):
>   mtd: rawnand: qcom: Pass 18 bit offset from QPIC base address to BAM
>   mtd: rawnand: qcom: Fix onfi param page read
>   mtd: rawnand: qcom: Fix read len for onfi param page
> 
>  drivers/mtd/nand/raw/qcom_nandc.c | 23 ++++++++++++++++++-----
>  1 file changed, 18 insertions(+), 5 deletions(-)
> 
> --

Tested-by: Lakshmi Sowjanya D <quic_laksd at quicinc.com>     # on SDX75

-- 
Regards
Lakshmi Sowjanya